"Lee Michaels" <leemichaels*nadaspam*@comcast.net> wrote in message
news:[email protected]...
>
> "Swingman" wrote
>>
>> Just about now some asshat will invariably jump up and righteously
>> declare the grippers are too expensive and they can make something
>> instead ... may be true for them, but it boils down to me being able to
>> put my trust in a safety device, and there is no doubt that the grippers
>> are more than worthy in that regard.
>> --
> And my comment to such remarks are, "Just how much are your hands worth?"
It's akin to motorcyclists wearing a helmet.
"How much is your brain worth"
Max
"Swingman" wrote
>
> Just about now some asshat will invariably jump up and righteously declare
> the grippers are too expensive and they can make something instead ... may
> be true for them, but it boils down to me being able to put my trust in a
> safety device, and there is no doubt that the grippers are more than
> worthy in that regard.
> --
And my comment to such remarks are, "Just how much are your hands worth?"
"Steve" <[email protected]> wrote in message
news:[email protected]...
> On 2010-02-06 09:43:13 -0500, Swingman <[email protected]> said:
>
>> You're more than welcome ... they basically become extensions of my hands
>> on most tasks on the table saw, router table, and jointer.
>>
>> Steve's right ... you will eventually want two.
>
> I just got here... can you give a link? Safety enhancements in the shop
> are a good thing, no matter the cost. (The cost to repair a
> partially-severed finger tendon -- a relatively minor procedure --
> would buy a nice SawStop. I'd rather have the tool.)
>
http://www.microjig.com/products/grr-ripper/index.shtml
"Robert Bonomi" <[email protected]> wrote
> Max <[email protected]> wrote:
>>
>>It's akin to motorcyclists wearing a helmet.
>>"How much is your brain worth"
>
> There are those who would question the worth of that metric, when a
> _motorcyclist_ is involved. <*GRIN*>
LOL. I had motorcycles for years and I suspect your right.
Max
On 2010-02-06 09:43:13 -0500, Swingman <[email protected]> said:
> You're more than welcome ... they basically become extensions of my
> hands on most tasks on the table saw, router table, and jointer.
>
> Steve's right ... you will eventually want two.
I just got here... can you give a link? Safety enhancements in the shop
are a good thing, no matter the cost. (The cost to repair a
partially-severed finger tendon -- a relatively minor procedure --
would buy a nice SawStop. I'd rather have the tool.)
"Swingman" <[email protected]> wrote in message
news:[email protected]...
> On 2/5/2010 9:45 PM, Mike M wrote:
>
>> Sometime back before I got hurt you had written something up about the
>> gripper system push block. I happened to pick one up because of
>> that. Today I had to cut quite a few oddball small pieces for a
>> project. What a great tool, always felt as though I had total
>> control of the small pieces.
>
> You're more than welcome ... they basically become extensions of my hands
> on most tasks on the table saw, router table, and jointer.
> Steve's right ... you will eventually want two.
>
> Just about now some asshat will invariably jump up and righteously declare
> the grippers are too expensive and they can make something instead ... may
> be true for them, but it boils down to me being able to put my trust in a
> safety device, and there is no doubt that the grippers are more than
> worthy in that regard.
#1 reason to own 2 is for production ripping narrow pieces where the gripper
eventually becomes to narrow to be stabley balanced on top of a narrow
piece, less than 1.5" or so. The second gripper with its "jack" leg
attached will keep it from rocking even on the narrowest of pieces is worth
its weight in gold.
"Larry Jaques" <novalidaddress@di\/ersify.com> wrote in message
news:[email protected]...
> On Sat, 6 Feb 2010 15:28:55 -0700, the infamous "Max"
> <[email protected]> scrawled the following:
>
>>"Lee Michaels" <leemichaels*nadaspam*@comcast.net> wrote in message
>>news:[email protected]...
>>>
>>> "Swingman" wrote
>>>>
>>>> Just about now some asshat will invariably jump up and righteously
>>>> declare the grippers are too expensive and they can make something
>>>> instead ... may be true for them, but it boils down to me being able to
>>>> put my trust in a safety device, and there is no doubt that the
>>>> grippers
>>>> are more than worthy in that regard.
>>>> --
>>> And my comment to such remarks are, "Just how much are your hands
>>> worth?"
>>
>>It's akin to motorcyclists wearing a helmet.
>>"How much is your brain worth"
>
> If it's freeway ridin', why wear a helmet? You want to SURVIVE that
> kind of a crash?
Helmets help preserve the face for an open casket funeral. They do nothing
to protect the rest of the body.
On 2/6/2010 10:03 AM, Leon wrote:
> "Swingman"<[email protected]> wrote in message
> news:[email protected]...
>> On 2/5/2010 9:45 PM, Mike M wrote:
>>
>>> Sometime back before I got hurt you had written something up about the
>>> gripper system push block. I happened to pick one up because of
>>> that. Today I had to cut quite a few oddball small pieces for a
>>> project. What a great tool, always felt as though I had total
>>> control of the small pieces.
>>
>> You're more than welcome ... they basically become extensions of my hands
>> on most tasks on the table saw, router table, and jointer.
>
>> Steve's right ... you will eventually want two.
>>
>> Just about now some asshat will invariably jump up and righteously declare
>> the grippers are too expensive and they can make something instead ... may
>> be true for them, but it boils down to me being able to put my trust in a
>> safety device, and there is no doubt that the grippers are more than
>> worthy in that regard.
>
> #1 reason to own 2 is for production ripping narrow pieces where the gripper
> eventually becomes to narrow to be stabley balanced on top of a narrow
> piece, less than 1.5" or so. The second gripper with its "jack" leg
> attached will keep it from rocking even on the narrowest of pieces is worth
> its weight in gold.
You're right about that. As we've discussed before, about the only thing
I don't like is that it is difficult to use them on narrow stock in
conjunction with many featherboards, particularly the magnetic ones.
Not the grippers fault, but it would be nice ...
--
www.e-woodshop.net
Last update: 10/22/08
KarlC@ (the obvious)
On 2/5/2010 9:45 PM, Mike M wrote:
> Sometime back before I got hurt you had written something up about the
> gripper system push block. I happened to pick one up because of
> that. Today I had to cut quite a few oddball small pieces for a
> project. What a great tool, always felt as though I had total
> control of the small pieces.
You're more than welcome ... they basically become extensions of my
hands on most tasks on the table saw, router table, and jointer.
Steve's right ... you will eventually want two.
Just about now some asshat will invariably jump up and righteously
declare the grippers are too expensive and they can make something
instead ... may be true for them, but it boils down to me being able to
put my trust in a safety device, and there is no doubt that the grippers
are more than worthy in that regard.
--
www.e-woodshop.net
Last update: 10/22/08
KarlC@ (the obvious)
On Fri, 05 Feb 2010 22:06:19 -0600, Steve Turner
<[email protected]> wrote:
>On 2/5/2010 9:45 PM, Mike M wrote:
>> Sometime back before I got hurt you had written something up about the
>> gripper system push block. I happened to pick one up because of
>> that. Today I had to cut quite a few oddball small pieces for a
>> project. What a great tool, always felt as though I had total
>> control of the small pieces.
>>
>> Mike M
>
>The Gripper is fabulous product - so fabulous that you really need two of them
>(trust me, you will).
Well actually thinking of long skinny pieces I can see your probably
right.
Mike M
In article <[email protected]>,
Max <[email protected]> wrote:
>"Lee Michaels" <leemichaels*nadaspam*@comcast.net> wrote in message
>news:[email protected]...
>>
>> "Swingman" wrote
>>>
>>> Just about now some asshat will invariably jump up and righteously
>>> declare the grippers are too expensive and they can make something
>>> instead ... may be true for them, but it boils down to me being able to
>>> put my trust in a safety device, and there is no doubt that the grippers
>>> are more than worthy in that regard.
>>> --
>> And my comment to such remarks are, "Just how much are your hands worth?"
>
>It's akin to motorcyclists wearing a helmet.
>"How much is your brain worth"
There are those who would question the worth of that metric, when a
_motorcyclist_ is involved. <*GRIN*>
On 2/5/2010 9:45 PM, Mike M wrote:
> Sometime back before I got hurt you had written something up about the
> gripper system push block. I happened to pick one up because of
> that. Today I had to cut quite a few oddball small pieces for a
> project. What a great tool, always felt as though I had total
> control of the small pieces.
>
> Mike M
The Gripper is fabulous product - so fabulous that you really need two of them
(trust me, you will).
--
See Nad. See Nad go. Go Nad!
To reply, eat the taco.
http://www.flickr.com/photos/bbqboyee/
On 2/7/10 10:24 AM, Larry Jaques wrote:
> On Sat, 6 Feb 2010 15:28:55 -0700, the infamous "Max"
>>>> --
>>> And my comment to such remarks are, "Just how much are your hands worth?"
>>
>> It's akin to motorcyclists wearing a helmet.
>> "How much is your brain worth"
>
> If it's freeway ridin', why wear a helmet? You want to SURVIVE that
> kind of a crash?
>
Paramedics have a name for motorcyclists who don't wear helmets: organ
donors.
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply
Leon wrote:
> "Larry Jaques" <novalidaddress@di\/ersify.com> wrote in message
> news:[email protected]...
>> On Sat, 6 Feb 2010 15:28:55 -0700, the infamous "Max"
>> <[email protected]> scrawled the following:
>>
>>> "Lee Michaels" <leemichaels*nadaspam*@comcast.net> wrote in message
>>> news:[email protected]...
>>>>
>>>> "Swingman" wrote
>>>>>
>>>>> Just about now some asshat will invariably jump up and righteously
>>>>> declare the grippers are too expensive and they can make something
>>>>> instead ... may be true for them, but it boils down to me being
>>>>> able to put my trust in a safety device, and there is no doubt
>>>>> that the grippers
>>>>> are more than worthy in that regard.
>>>>> --
>>>> And my comment to such remarks are, "Just how much are your hands
>>>> worth?"
>>>
>>> It's akin to motorcyclists wearing a helmet.
>>> "How much is your brain worth"
>>
>> If it's freeway ridin', why wear a helmet? You want to SURVIVE that
>> kind of a crash?
>
> Helmets help preserve the face for an open casket funeral. They do
> nothing to protect the rest of the body.
There seems to be an inherent assumption that a get-off on the freeway will
be the result of a head on impace with a truck or something. That's very
unlikely. Far more likely is that you'll hit an oil patch or an ice patch
and drop the bike and go sliding down the road a pace. And when that
happens the right gear makes the difference between "pick the bike up and go
on with your ride" and "lie there wishing your were going to die".
http://www.microjig.com/ Woodcraft has them on sale on occasion, and
amazon has them as well. They come in a couple of different
configurations of accessories.
Mike M
On Sun, 7 Feb 2010 00:10:58 -0500, Steve <[email protected]>
wrote:
>On 2010-02-06 09:43:13 -0500, Swingman <[email protected]> said:
>
>> You're more than welcome ... they basically become extensions of my
>> hands on most tasks on the table saw, router table, and jointer.
>>
>> Steve's right ... you will eventually want two.
>
>I just got here... can you give a link? Safety enhancements in the shop
>are a good thing, no matter the cost. (The cost to repair a
>partially-severed finger tendon -- a relatively minor procedure --
>would buy a nice SawStop. I'd rather have the tool.)
On Sun, 7 Feb 2010 14:09:13 -0500, the infamous "J. Clarke"
<[email protected]> scrawled the following:
>Leon wrote:
>> "Larry Jaques" <novalidaddress@di\/ersify.com> wrote in message
>> news:[email protected]...
>>> On Sat, 6 Feb 2010 15:28:55 -0700, the infamous "Max"
>>> <[email protected]> scrawled the following:
>>>
>>>> "Lee Michaels" <leemichaels*nadaspam*@comcast.net> wrote in message
>>>> news:[email protected]...
>>>>>
>>>>> "Swingman" wrote
>>>>>>
>>>>>> Just about now some asshat will invariably jump up and righteously
>>>>>> declare the grippers are too expensive and they can make something
>>>>>> instead ... may be true for them, but it boils down to me being
>>>>>> able to put my trust in a safety device, and there is no doubt
>>>>>> that the grippers
>>>>>> are more than worthy in that regard.
>>>>>> --
>>>>> And my comment to such remarks are, "Just how much are your hands
>>>>> worth?"
>>>>
>>>> It's akin to motorcyclists wearing a helmet.
>>>> "How much is your brain worth"
>>>
>>> If it's freeway ridin', why wear a helmet? You want to SURVIVE that
>>> kind of a crash?
>>
>> Helmets help preserve the face for an open casket funeral. They do
>> nothing to protect the rest of the body.
>
>There seems to be an inherent assumption that a get-off on the freeway will
>be the result of a head on impace with a truck or something. That's very
>unlikely. Far more likely is that you'll hit an oil patch or an ice patch
>and drop the bike and go sliding down the road a pace. And when that
>happens the right gear makes the difference between "pick the bike up and go
>on with your ride" and "lie there wishing your were going to die".
I walked away from my drop with a headache and some skin off my right
forearm. The lady who pulled out in front of me in her Cadiddlyack
got a crushed back door. My helmet hit it so hard it broke the window,
and the window was up. This at less thatn 35mph on a rainy day. She
saw me as she was in my lane and froze, stopping right in my path. i
hit both brakes, felt the rear slide left, and jumped on top as it
went down. My right forearm (in a jacket, thankfully) helped bounce
me onto the bike. I'm a definite believer in helmets, but I wouldn't
want one to keep me alive as a vegetable with 123 broken bones and
burst organs, TYVM.
--
We don't receive wisdom; we must discover it for ourselves
after a journey that no one can take for us or spare us.
-- Marcel Proust
On Sat, 6 Feb 2010 15:28:55 -0700, the infamous "Max"
<[email protected]> scrawled the following:
>"Lee Michaels" <leemichaels*nadaspam*@comcast.net> wrote in message
>news:[email protected]...
>>
>> "Swingman" wrote
>>>
>>> Just about now some asshat will invariably jump up and righteously
>>> declare the grippers are too expensive and they can make something
>>> instead ... may be true for them, but it boils down to me being able to
>>> put my trust in a safety device, and there is no doubt that the grippers
>>> are more than worthy in that regard.
>>> --
>> And my comment to such remarks are, "Just how much are your hands worth?"
>
>It's akin to motorcyclists wearing a helmet.
>"How much is your brain worth"
If it's freeway ridin', why wear a helmet? You want to SURVIVE that
kind of a crash?
--
We don't receive wisdom; we must discover it for ourselves
after a journey that no one can take for us or spare us.
-- Marcel Proust