> "Leon" <lcb11211@swbelldotnet> wrote in message
> news:[email protected]...
>> My wife said that if I built in our entertainment nook I could but a new
>> 70" LED TV. ;~)
>>
>> Well the price dropped on the top of the line model that I have been
>> looking at and we got the TV at a reduced price, $900.00 off the going
>> price. I got the TV and the savings will pay for the entertainment
>> center.
>>
>> We are going for a different type look. Walnut panels mounted vertically
>> and floating out from the existing wall behind the TV and a walnut
>> console, for the electronics and storage, that will remind some of you of
>> a 60's console stereo.
>> The electronics will be under the top and behind the front 3 grilled
>> doors. Top access to ease adding equipment and routing wires.
>>
>> Comments?
>>
>>
>> http://www.flickr.com/photos/lcb11211/9622250273/
Having some problems with my newsreader. I will try this one more time.
These are my opinions only! Ya wanted comments, so here goes. ;-)
1) I find those flat screen furniture that hide the screen to be big, bulky
and not that interesting. If you are gong to a fancy display to show off
that big ass TV, display it proudly! Show it off. Just give it a wipe down
now and then to keep the dust away.
2. The idea of dark around the screen is good. It is easier on the eyes.
3. Want to hide the other components? You may need to see them to operate
them. Changing channels, etc. is much easier if you can actually see the
display.
4. Make it remote friendly. I had to modify a couple entertainment centers
when folks who were sitting in their easy chair could not activate the
components that controlled what was up on that big screen. On one such job,
I had to cut out much of one side of the opening to allow access to the
infrared ports on the cable box and DVD player. On another, I drilled some
holes. Neither were very attractive. Just functional. But they had too
much money into everything to pay for something custom or nice.
5. To continue the past point, make everything future upgrade friendly. I
just replaced my cable box a few days ago. It was smaller and the infrared
port was on the opposite side. I had to reposition the box and angle it
slightly. The opening allowed this. But I had to put a block under it. Or
stand to use the remote.
Sooooo....., You need remote access now, and into the future. Plan, and
build accordingly.
6. And speaking of remotes, here is an idea. I saw this a couple of times.
Why not a custom "cabinet" for the remotes? Ideally something that would
allow you to "put it away" after use. Ya know, to keep the dust off of
them. I never met a remote that did not get dirty and dusty. And they get
misplaced from time to time. Create a nice little "home" for them and they
tend to stay healthier, cleaner and accessible. Maybe a place to put drinks
down as well. Or the TV guide, etc. A dedicated cabinet that takes care of
all your need by the easy chair while viewing your favorite programs.
7. One of my pet peeves about big cabinets for electronics is that they
often become junk collectors. People stack all kinds of crap on them. Use
this for the electronics and nothing else. If you need to store something,
stash it away inside a drawer or cabinet. Keep the overall appearance clean
and uncluttered. Out of that context, try to design it so that is a
shortage of available space to stack crap on it that doesn't belong there!
I gotta run. That is all I could think of off the top of my head. (To
maintain your wrec credibility, you need to use at least 432 dominoes on
this project!) :-)
Ed Pawlowski <[email protected]> wrote:
> On 8/30/2013 12:49 PM, Lee Michaels wrote:
>
>>
>> 4. Make it remote friendly. I had to modify a couple entertainment
>> centers when folks who were sitting in their easy chair could not
>> activate the components that controlled what was up on that big screen.
>> On one such job, I had to cut out much of one side of the opening to
>> allow access to the infrared ports on the cable box and DVD player.
>
>
>
> I have DirecTv. With their box you can get an RF remote. Fantastic that
> you don't have to aim it or be in line with anything. Check to see if
> that is available for your main components.
I have the latest Genie DVR/DirecTV. Unfortunately it only uses the latest
miniature RF remote. The older RF remotes will not work on the actual DVR.
They, the RF remotes, do work on the clients in the bedrooms however.
"Lee Michaels" <leemichaels*nadaspam* at comcast dot net> wrote:
>> "Leon" <lcb11211@swbelldotnet> wrote in message >
>> news:[email protected]...
>>> My wife said that if I built in our entertainment nook I could but a
>>> new >> 70" LED TV. ;~)
>>>
>>> Well the price dropped on the top of the line model that I have been >>
>>> looking at and we got the TV at a reduced price, $900.00 off the going
>>> >> price. I got the TV and the savings will pay for the entertainment >> center.
>>>
>>> We are going for a different type look. Walnut panels mounted
>>> vertically >> and floating out from the existing wall behind the TV and
>>> a walnut >> console, for the electronics and storage, that will remind
>>> some of you of >> a 60's console stereo.
>>> The electronics will be under the top and behind the front 3 grilled >>
>>> doors. Top access to ease adding equipment and routing wires.
>>>
>>> Comments?
>>>
>>>
>>> http://www.flickr.com/photos/lcb11211/9622250273/
>
> Having some problems with my newsreader. I will try this one more time.
> These are my opinions only! Ya wanted comments, so here goes. ;-)
>
> 1) I find those flat screen furniture that hide the screen to be big,
> bulky and not that interesting. If you are gong to a fancy display to
> show off that big ass TV, display it proudly! Show it off. Just give it
> a wipe down now and then to keep the dust away.
The TV will never be hidden, it will always be visible..and AAMOF in stand
by mode it displays a slide show of pictures if set up that way.
>
> 2. The idea of dark around the screen is good. It is easier on the eyes.
Dark but slightly illuminated, with the TV being the only thing on it is a
bit too much.
>
> 3. Want to hide the other components? You may need to see them to
> operate them. Changing channels, etc. is much easier if you can actually see the display.
Actually IR lights from the remotes travels through the speaker grills just
fine. The doors center material will be some type speaker grill material..
Not sure of cloth or metal yet.
>
> 4. Make it remote friendly. I had to modify a couple entertainment
> centers when folks who were sitting in their easy chair could not
> activate the components that controlled what was up on that big screen.
> On one such job, I had to cut out much of one side of the opening to
> allow access to the infrared ports on the cable box and DVD player. On
> another, I drilled some holes. Neither were very attractive. Just
> functional. But they had too much money into everything to pay for
> something custom or nice.
>
> 5. To continue the past point, make everything future upgrade friendly.
> I just replaced my cable box a few days ago. It was smaller and the
> infrared port was on the opposite side. I had to reposition the box and
> angle it slightly. The opening allowed this. But I had to put a block
> under it. Or stand to use the remote.
>
> Sooooo....., You need remote access now, and into the future. Plan, and
> build accordingly.
My picture would be worth a thousand words. :-)
>
> 6. And speaking of remotes, here is an idea. I saw this a couple of
> times. Why not a custom "cabinet" for the remotes? Ideally something
> that would allow you to "put it away" after use. Ya know, to keep the
> dust off of them. I never met a remote that did not get dirty and dusty.
> And they get misplaced from time to time. Create a nice little "home"
> for them and they tend to stay healthier, cleaner and accessible. Maybe
> a place to put drinks down as well. Or the TV guide, etc. A dedicated
> cabinet that takes care of all your need by the easy chair while viewing
> your favorite programs.
>
We have a FlexSteel powered love seat recliner with center console for
remotes on order. :-)
> 7. One of my pet peeves about big cabinets for electronics is that they
> often become junk collectors. People stack all kinds of crap on them.
> Use this for the electronics and nothing else. If you need to store
> something, stash it away inside a drawer or cabinet. Keep the overall
> appearance clean and uncluttered. Out of that context, try to design it
> so that is a shortage of available space to stack crap on it that doesn't belong there!
Agreed, the front and center speaker might go on top. Each of the three
grilled doors will hide electronics, 8' wide and 6 drawers.
>
> I gotta run. That is all I could think of off the top of my head. (To
> maintain your wrec credibility, you need to use at least 432 dominoes on
> this project!) :-)
Scott Lurndal <[email protected]> wrote:
> Ed Pawlowski <[email protected]> writes:
>> On 8/30/2013 12:49 PM, Lee Michaels wrote:
>>
>>>
>>> 4. Make it remote friendly. I had to modify a couple entertainment
>>> centers when folks who were sitting in their easy chair could not
>>> activate the components that controlled what was up on that big screen.
>>> On one such job, I had to cut out much of one side of the opening to
>>> allow access to the infrared ports on the cable box and DVD player.
>>
>>
>>
>> I have DirecTv. With their box you can get an RF remote. Fantastic that
>> you don't have to aim it or be in line with anything. Check to see if
>> that is available for your main components.
>>
>
> All my gear is in a 19" EIA computer rack (APC, ivory, with smoked glass
> front panel) in a completely different room from the display. A simple
> IR receiver/RF transmitter and RF receiver/IR transmitter works well to
> tunnel the remote from the viewing room into the equipment room (and
> the smoked glass panel doesn't block the IR signals).
>
> DAGS: IR Remote Extender
Our current setup has dark tinted glass doors. We are tired of the seeing
the equipment lights shining through the glass doors and really don't have
a good alternative location.
"Lee Michaels" <leemichaels*nadaspam* at comcast dot net>
wrote in message
> 5. To continue the past point, make everything future
> upgrade friendly. I just replaced my cable box a few
> days ago. It was smaller and the infrared port was on
> the opposite side. I had to reposition the box and angle
> it slightly. The opening allowed this. But I had to put
> a block under it. Or stand to use the remote.
An easy solution for that sort of problem is an IR extender.
--
dadiOH
____________________________
Winters getting colder? Tired of the rat race?
Taxes out of hand? Maybe just ready for a change?
Check it out... http://www.floridaloghouse.net
Ed Pawlowski <[email protected]> writes:
>On 8/30/2013 12:49 PM, Lee Michaels wrote:
>
>>
>> 4. Make it remote friendly. I had to modify a couple entertainment
>> centers when folks who were sitting in their easy chair could not
>> activate the components that controlled what was up on that big screen.
>> On one such job, I had to cut out much of one side of the opening to
>> allow access to the infrared ports on the cable box and DVD player.
>
>
>
>I have DirecTv. With their box you can get an RF remote. Fantastic that
>you don't have to aim it or be in line with anything. Check to see if
>that is available for your main components.
>
All my gear is in a 19" EIA computer rack (APC, ivory, with smoked glass
front panel) in a completely different room from the display. A simple
IR receiver/RF transmitter and RF receiver/IR transmitter works well to
tunnel the remote from the viewing room into the equipment room (and
the smoked glass panel doesn't block the IR signals).
DAGS: IR Remote Extender
On 8/30/2013 12:49 PM, Lee Michaels wrote:
>
> 4. Make it remote friendly. I had to modify a couple entertainment
> centers when folks who were sitting in their easy chair could not
> activate the components that controlled what was up on that big screen.
> On one such job, I had to cut out much of one side of the opening to
> allow access to the infrared ports on the cable box and DVD player.
I have DirecTv. With their box you can get an RF remote. Fantastic that
you don't have to aim it or be in line with anything. Check to see if
that is available for your main components.