In article <1165694628.789371.241070@j72g2000cwa.googlegroups.com>, "Doug" <dserson@hvc.rr.com> wrote:
>Thanks to those who responded to my resawing problem. I changed the
>blade to 1/2 4TPI (I had it in the shop the whole time) tensioned it up
>good, reset the guides and resawed a 4 inch piece of white oak very
>nicely.
>
>Much thanks to those who took the time!
>
For what it's worth, if you start to see the same problems later on with that
blade, the first thing to look for is dull teeth.
--
Regards,
Doug Miller (alphageek at milmac dot com)
It's time to throw all their damned tea in the harbor again.