On Oct 5, 11:13 pm, "[email protected]" <[email protected]>
wrote:
> On some of my old saws (really old ones). On the top about 6 inches
> back from the tip there is a small piece about the thickness of a
> nickle that sticks up does this part have a name, and did it ever have
> a function. You don't see it on saws made these days.
>
> Marty
You're probably referring to the "nib", the purpose of which is often
debated. Some think it was for starting the cut. Some think it was a
sample tooth, to shape the working teeth to when sharpening. Some
think it was a warning that indicated your saw was almost ready to
pull out of the cut. Some say it was a marker to scratch a cut line.
Some say it was purely decorative. Probably some other guesses that
I've forgotten. Take your pick.
John Martin
On Oct 6, 2:57 am, John Martin <[email protected]> wrote:
> You're probably referring to the "nib", the purpose of which is often
> debated. Some think it was for starting the cut. Some think it was a
> sample tooth, to shape the working teeth to when sharpening. Some
> think it was a warning that indicated your saw was almost ready to
> pull out of the cut. Some say it was a marker to scratch a cut line.
> Some say it was purely decorative. Probably some other guesses that
> I've forgotten. Take your pick.
>
> John Martin
The OldTools Archive has a thread in which someone puts forth the
theory I like best - that it was a little nubbie for one of the
strings of a blade protector. The front string goes over the nib and
the back one goes over or through the handle.
http://people.iarc.uaf.edu/~cswingle/archive/get.phtml?message_id=43921&submit_thread=1
On Oct 8, 9:40 pm, Tom Veatch wrote:
> On Fri, 05 Oct 2007 20:13:55 -0700, "[email protected]"
>
> <[email protected]> wrote:
> >On some of my old saws (really old ones). On the top about 6 inches
> >back from the tip there is a small piece about the thickness of a
> >nickle that sticks up does this part have a name, and did it ever have
> >a function. You don't see it on saws made these days.
>
> >Marty
>
> That's a subject that will be debated until the sun runs out of fuel.
> Here are a couple of references that indicate the nib is a
> traditional, vestigial decoration that dates back to the late 1600's.
> Believe them or not, your choice.
>
> http://www.disstonianinstitute.com/glossary.html
>
> http://books.google.com/books?id=T4m6kq7XyIUC&pg=PA169&lpg=PA169&dq=h...
>
> Tom Veatch
> Wichita, KS
> USA
Its called a kewpie point. It was to initiate a cut so the saws teeth
did not splinter the wood on the edge. My grandfather worked in a saw
factory that made them when he was a kid. It was originally the Union
Saw and |Tool company and was later bought out by Frackville Saw. Time
frame was 1908-1915 or so, and he was hired to clean up and help the
fella that cut and carved the saws applewood handles. He installed
handles on saws as well.for the sum of 50 cents a week..He had been a
carpenter all his life so I sort of take him at his word what it wa
for. I have also seen some folks use it to cut or nick through an
embedded nail........which it is more than capable of doing. However
ontodays saws where only the teeth are hardened, those kewpie points
woud not hold up. Anyone looking for original old time hand carved
apple wood saw handles complete with brass fasteners. (5 per
handle)........I have em by the bucket fulls...................Brass T
stub fasteners are embossed Frackville Saw Co, and a few are listed as
Union Tool and Level or something along those lines.
<[email protected]> wrote
> On some of my old saws (really old ones). On the top about 6 inches
> back from the tip there is a small piece about the thickness of a
> nickle that sticks up does this part have a name, and did it ever
have
> a function. You don't see it on saws made these days.
If it has a hole thru it, a handle mount.
Lew
"Leon" <[email protected]> wrote in message
news:[email protected]...
>
> "John Martin" <[email protected]> wrote in message
> news:[email protected]...
>> On Oct 5, 11:13 pm, "[email protected]" <[email protected]>
>> wrote:
>>> On some of my old saws (really old ones). On the top about 6 inches
>>> back from the tip there is a small piece about the thickness of a
>>> nickle that sticks up does this part have a name, and did it ever have
>>> a function. You don't see it on saws made these days.
>>>
>>> Marty
>>
>> You're probably referring to the "nib", the purpose of which is often
>> debated. Some think it was for starting the cut. Some think it was a
>> sample tooth, to shape the working teeth to when sharpening. Some
>> think it was a warning that indicated your saw was almost ready to
>> pull out of the cut. Some say it was a marker to scratch a cut line.
>> Some say it was purely decorative. Probably some other guesses that
>> I've forgotten. Take your pick.
>>
>> John Martin
>>
>
>
> It's probably a splitter.
Sounds more like a riving knife.
<[email protected]> wrote in message
news:[email protected]...
> On some of my old saws (really old ones). On the top about 6 inches
> back from the tip there is a small piece about the thickness of a
> nickle that sticks up does this part have a name, and did it ever have
> a function. You don't see it on saws made these days.
>
> Marty
>
Front peep sight.
"John Martin" <[email protected]> wrote in message
news:[email protected]...
> On Oct 5, 11:13 pm, "[email protected]" <[email protected]>
> wrote:
>> On some of my old saws (really old ones). On the top about 6 inches
>> back from the tip there is a small piece about the thickness of a
>> nickle that sticks up does this part have a name, and did it ever have
>> a function. You don't see it on saws made these days.
>>
>> Marty
>
> You're probably referring to the "nib", the purpose of which is often
> debated. Some think it was for starting the cut. Some think it was a
> sample tooth, to shape the working teeth to when sharpening. Some
> think it was a warning that indicated your saw was almost ready to
> pull out of the cut. Some say it was a marker to scratch a cut line.
> Some say it was purely decorative. Probably some other guesses that
> I've forgotten. Take your pick.
>
> John Martin
>
It's probably a splitter.
In article <[email protected]>,
"Leon" <[email protected]> wrote:
>Some time ago there was a long thread on this. Some one even contacted
Diston and asked them. There was no concensus. You might search the
archives.
Chuck P.
On Fri, 05 Oct 2007 20:13:55 -0700, "[email protected]"
<[email protected]> wrote:
>On some of my old saws (really old ones). On the top about 6 inches
>back from the tip there is a small piece about the thickness of a
>nickle that sticks up does this part have a name, and did it ever have
>a function. You don't see it on saws made these days.
>
>Marty
That's a subject that will be debated until the sun runs out of fuel.
Here are a couple of references that indicate the nib is a
traditional, vestigial decoration that dates back to the late 1600's.
Believe them or not, your choice.
http://www.disstonianinstitute.com/glossary.html
http://books.google.com/books?id=T4m6kq7XyIUC&pg=PA169&lpg=PA169&dq=handsaw+nib+disston+-ebay&source=web&ots=suvkmSME54&sig=CEx9EMGiF9LXkb
Tom Veatch
Wichita, KS
USA