For SU users, here are two more "dynamic" components for use as an aid in
kitchen cabinet design using SketchUp:
A fairly standard, one drawer, one cabinet, "dynamic" Base Cabinet, with
choice of user selected, or "scaled", widths; and the plywood case work for
same in a separate file, sans face frame (posted in the first post in this
thread).
Put on your own doors and drawer fronts. Use the case work model for adding
your own face frame, or going euro.
http://www.e-woodshop.net/files/DC-BaseCabinet-Casework.zip
Let me know if there are any problems.
--
www.e-woodshop.net
Last update: 10/22/08
KarlC@ (the obvious)
For SketchUp7 users, here's my full collection of "dynamic" Base and Wall
kitchen cabinet files:
http://www.e-woodshop.net/files/DC-BaseCabinetParts.zip
http://www.e-woodshop.net/files/DC-WallCabinetParts.zip
Each zip folder contains: a dynamic "face frame" model; a dynamic
"casework"; model; and a dynamic "cabinet" model.
Depending upon the models design, each will respond in either width, height,
or both, with user input from a drop down list box populated with industry
standard 3" increments, or alternately using the "Scale" tool.
(Note: If for some reason the model does not work dynamically when first
imported/opened with SU, you may have to "explode" the model ONCE first ...
but do that only if necessary!)
Let me know if you experience any problems, or have any questions.
Enjoy ...
--
www.e-woodshop.net
Last update: 10/22/08
KarlC@ (the obvious)