I'm new to this newsgroup but definitely not a novice. That said, there
is always something to learn and this looks like the place.
I'm wondering if anyone has had experience with the router bits offered
on Ebay. Specifically the yellow carbide bits (no brand name
mentioned)from Super Carbide Tools. I'm looking at a 11 pc set of 1/2"
shank for around $30 and a panel raising bit under $20. I know, if it
sounds too good.......... that's why I'm asking. I certainly don't want
a 3-1/2" dia. bit coming apart on me. Is it possible they're made by a
Brand Name like so many store brands are?
Part of my thinking is that the specialty bits are used only
occasionally and therefore even the cheapies would last quite a while.
Go with brand names for hardworking bits like round over, straight,
template, etc.
Any thoughts? Thanks
Bob C wrote:
> I'm new to this newsgroup but definitely not a novice. That said, there
> is always something to learn and this looks like the place.
>
> I'm wondering if anyone has had experience with the router bits offered
> on Ebay. Specifically the yellow carbide bits (no brand name
> mentioned)from Super Carbide Tools. I'm looking at a 11 pc set of 1/2"
> shank for around $30 and a panel raising bit under $20. I know, if it
> sounds too good.......... that's why I'm asking. I certainly don't want
> a 3-1/2" dia. bit coming apart on me. Is it possible they're made by a
> Brand Name like so many store brands are?
>
> Part of my thinking is that the specialty bits are used only
> occasionally and therefore even the cheapies would last quite a while.
> Go with brand names for hardworking bits like round over, straight,
> template, etc.
>
> Any thoughts? Thanks
Thanks for the responses. Pretty much what I expected to hear.
By the way Woodcraft.com still has some of their bits on sale at $5.00
ea. This is an introductory price to introduce their own line of bits.
I've tried a few and they are very good. Not sure how regular prices
will compare.
Bob C
Bob C wrote:
> I'm new to this newsgroup but definitely not a novice. That said, there
> is always something to learn and this looks like the place.
>
> I'm wondering if anyone has had experience with the router bits offered
> on Ebay. Specifically the yellow carbide bits (no brand name
> mentioned)from Super Carbide Tools. I'm looking at a 11 pc set of 1/2"
> shank for around $30 and a panel raising bit under $20. I know, if it
> sounds too good.......... that's why I'm asking. I certainly don't want
> a 3-1/2" dia. bit coming apart on me. Is it possible they're made by a
> Brand Name like so many store brands are?
>
> Part of my thinking is that the specialty bits are used only
> occasionally and therefore even the cheapies would last quite a while.
> Go with brand names for hardworking bits like round over, straight,
> template, etc.
>
> Any thoughts? Thanks
Bob,
You should check out MCLS bits. Do a search and you'll find them.
They have some great specials on their boxed sets of bits right now.
They also carry Amana for their top of the line bits.
Bryan
Bob C wrote:
| I'm new to this newsgroup but definitely not a novice. That said,
| there is always something to learn and this looks like the place.
|
| I'm wondering if anyone has had experience with the router bits
| offered on Ebay. Specifically the yellow carbide bits (no brand name
| mentioned)from Super Carbide Tools. I'm looking at a 11 pc set of
| 1/2" shank for around $30 and a panel raising bit under $20. I
| know, if it sounds too good.......... that's why I'm asking. I
| certainly don't want a 3-1/2" dia. bit coming apart on me. Is it
| possible they're made by a Brand Name like so many store brands are?
|
| Part of my thinking is that the specialty bits are used only
| occasionally and therefore even the cheapies would last quite a
| while. Go with brand names for hardworking bits like round over,
| straight, template, etc.
|
| Any thoughts? Thanks
I bought a set of cheapie yellow carbide bits at Menards. Closed the
collet on a 3/8" straight bit and fired up the router. I had white
pine smoke before I'd managed to rout even 1/4".
What you're looking at may not be the same - but I don't think /I'll/
ever buy another router bit with yellow paint on it. :-(
--
Morris Dovey
DeSoto Solar
DeSoto, Iowa USA
http://www.iedu.com/DeSoto
Bob C wrote:
> Bob C wrote:
>> I'm new to this newsgroup but definitely not a novice. That said,
>> there is always something to learn and this looks like the place.
>>
>> I'm wondering if anyone has had experience with the router bits
>> offered on Ebay. Specifically the yellow carbide bits (no brand name
>> mentioned)from Super Carbide Tools. I'm looking at a 11 pc set of
>> 1/2" shank for around $30 and a panel raising bit under $20. I know,
>> if it sounds too good.......... that's why I'm asking. I certainly
>> don't want a 3-1/2" dia. bit coming apart on me. Is it possible
>> they're made by a Brand Name like so many store brands are?
>>
>> Part of my thinking is that the specialty bits are used only
>> occasionally and therefore even the cheapies would last quite a
>> while. Go with brand names for hardworking bits like round over,
>> straight, template, etc.
>>
>> Any thoughts? Thanks
>
> Thanks for the responses. Pretty much what I expected to hear.
> By the way Woodcraft.com still has some of their bits on sale at $5.00
> ea. This is an introductory price to introduce their own line of bits.
> I've tried a few and they are very good. Not sure how regular prices
> will compare.
>
> Bob C
You want cheap bits? Try Hartville's clearance set of 24 with 1/2" shanks.
$30.
http://www.hartvilletool.com/product/12223
--
Frank Howell
-----------------
www.Newsgroup-Binaries.com - *Completion*Retention*Speed*
Access your favorite newsgroups from home or on the road
-----------------
Lew Hodgett wrote:
> It is my understanding that the guy who runs the place is the son of the
> guy who was involved with Jeseda and CMT.
I believe "Razor Tools" is that company. Their "Product Information"
page starts out "It is the mission of Jesada Tool..."
http://allita.net/Projects/omnicat5/index.php?cat_id=0
--
Jack Novak
Buffalo, NY - USA
[email protected]
Yeah, I got a set like that before also. And like they say, you get
what you pay for.
I had assumed that they were cr*p, but I figured it would be good to
practice with "throw away" bits.
There are many great router bits out there ... CMT, Freud, Whiteside ...
and of course they cost more, but in the long run it's worth it.
If you have little to no experience with routing, then get the cheap
bits, practice on cheap wood, and then get yourself some nice bits. But
I'd stay away from the bargain basement panel raising bit. There is no
way that it would be worth the trouble it'll give you. For that, you
need a nice bit. Again ... well worth the extra bucks in the long run.
Jack
Bob C wrote:
> I'm new to this newsgroup but definitely not a novice. That said, there
> is always something to learn and this looks like the place.
>
> I'm wondering if anyone has had experience with the router bits offered
> on Ebay. Specifically the yellow carbide bits (no brand name
> mentioned)from Super Carbide Tools. I'm looking at a 11 pc set of 1/2"
> shank for around $30 and a panel raising bit under $20. I know, if it
> sounds too good.......... that's why I'm asking. I certainly don't want
> a 3-1/2" dia. bit coming apart on me. Is it possible they're made by a
> Brand Name like so many store brands are?
>
> Part of my thinking is that the specialty bits are used only
> occasionally and therefore even the cheapies would last quite a while.
> Go with brand names for hardworking bits like round over, straight,
> template, etc.
>
> Any thoughts? Thanks
Bob C wrote:
> Thanks for the responses. Pretty much what I expected to hear.
Might want to check out Infinity Tools down around Tampa.
Have some attractive prices.
I got a dovetail bit from them as a test.
I'm satisfied.
It is my understanding that the guy who runs the place is the son of
the guy who was involved with Jeseda and CMT.
Lew
Lew Hodgett wrote:
> Bob C wrote:
>
> > Thanks for the responses. Pretty much what I expected to hear.
>
> Might want to check out Infinity Tools down around Tampa.
>
> Have some attractive prices.
>
> I got a dovetail bit from them as a test.
>
> I'm satisfied.
>
> It is my understanding that the guy who runs the place is the son of the
> guy who was involved with Jeseda and CMT.
>
> Lew
>
Thanks, I'll check it out
Bob C
In article <[email protected]>,
Bob C <[email protected]> wrote:
>I'm new to this newsgroup but definitely not a novice. That said, there
>is always something to learn and this looks like the place.
>
>I'm wondering if anyone has had experience with the router bits offered
>on Ebay. Specifically the yellow carbide bits (no brand name
>mentioned)from Super Carbide Tools. I'm looking at a 11 pc set of 1/2"
>shank for around $30 and a panel raising bit under $20. I know, if it
>sounds too good.......... that's why I'm asking. I certainly don't want
>a 3-1/2" dia. bit coming apart on me. Is it possible they're made by a
>Brand Name like so many store brands are?
>
>Part of my thinking is that the specialty bits are used only
>occasionally and therefore even the cheapies would last quite a while.
>Go with brand names for hardworking bits like round over, straight,
>template, etc.
>
>Any thoughts? Thanks
Look at the shipping costs and see what it really costs to buy these
bits from ebay. In many cases you will do better by going directly to
the source, i.e. Harbor Freight or a similar web or mail order
company. I say this as someone who has bought probably over 200 items
from ebay sellers over the years. There are many bargains to be had
there but don't look to ebay as the last word in best deals.
--
No dumb questions, just dumb answers.
Larry Wasserman - Baltimore, Maryland - [email protected]
"Bob C" <[email protected]> wrote in message
news:[email protected]...
> I'm new to this newsgroup but definitely not a novice. That said, there is
> always something to learn and this looks like the place.
>
> I'm wondering if anyone has had experience with the router bits offered on
> Ebay. Specifically the yellow carbide bits (no brand name mentioned)from
> Super Carbide Tools. I'm looking at a 11 pc set of 1/2" shank for around
> $30 and a panel raising bit under $20. I know, if it sounds too
> good.......... that's why I'm asking. I certainly don't want a 3-1/2" dia.
> bit coming apart on me. Is it possible they're made by a Brand Name like
> so many store brands are?
>
> Part of my thinking is that the specialty bits are used only occasionally
> and therefore even the cheapies would last quite a while.
> Go with brand names for hardworking bits like round over, straight,
> template, etc.
>
> Any thoughts? Thanks
If your going to wait for it to be shipped from where ever, have a look at
Lee Valley Tools bits . Not the cheapest but not the most expensive either.
I have more than a few of them and find they work well.
Jim
Bob C wrote:
> I'm new to this newsgroup but definitely not a novice. That said,
> there is always something to learn and this looks like the place.
>
> I'm wondering if anyone has had experience with the router bits
> offered on Ebay. Specifically the yellow carbide bits (no brand name
> mentioned)from Super Carbide Tools. I'm looking at a 11 pc set of
> 1/2" shank for around $30 and a panel raising bit under $20. I know,
> if it sounds too good.......... that's why I'm asking. I certainly
> don't want a 3-1/2" dia. bit coming apart on me. Is it possible
> they're made by a Brand Name like so many store brands are?
>
> Part of my thinking is that the specialty bits are used only
> occasionally and therefore even the cheapies would last quite a
> while. Go with brand names for hardworking bits like round over,
> straight, template, etc.
>
> Any thoughts? Thanks
You might take a look here http://www.cripedistributing.com/. They have
a fair selection. Mostly name brands. I visit their store faily often
since I live in the same city. They also handle other tools and things
also. Jim
--