Look at the calendar, you fool you.
*snickers*
r---> who is thinking of going to Walmart today with a few pre-made P-
Labels and switch a bunch of hair-dye bottles from their boxes and re-
labelling them. Raven becomes California Sunshine...that sort of
thinking... probably illegal... okay, maybe switching under-arm
deoderant spray with 3M spray contact adhesive?
In article <[email protected]>, Stephen M
<[email protected]> wrote:
> Can you post a link... site searches O "april" and "Fool" only yeilded the
> last three years' products.
<http://www.leevalley.com/wood/page.aspx?p=56737&c=1>
--
You can't PLAN sincerity. You have to make it up on the spot! -- Denny Crane
patrick mitchel wrote:
> how bout the udder way round? Now that would get some attention from the
> wreckers. Pat
>
>
I specifically went to the LV site today
to see what lil nasty they were going to
pull on us this year. I found the last
three years' pranks, but nothing for 2007.
Last year on this day, I ran the end of
my thumb into a spinning TS blade. It's
not much of a saw, and it really should
be replaced for a number of reasons, but
it does cut thumbs. Not square. Not
neat. Certainly not joint-ready. But it
cuts them.
SWMBO thinks this is a bad day for power
tools.
Tanus
--
This is not really a sig.
http://users.compzone.ca/george/shop/
Tanus wrote:
> patrick mitchel wrote:
>> how bout the udder way round? Now that would get some attention from
>> the wreckers. Pat
>>
>
> I specifically went to the LV site today to see what lil nasty they were
> going to pull on us this year. I found the last three years' pranks, but
> nothing for 2007.
>
> Last year on this day, I ran the end of my thumb into a spinning TS
> blade. It's not much of a saw, and it really should be replaced for a
> number of reasons, but it does cut thumbs. Not square. Not neat.
> Certainly not joint-ready. But it cuts them.
>
> SWMBO thinks this is a bad day for power tools.
>
> Tanus
>
Oooops. I spoke too soon. LV did put up
the April 1st page. My bad.
Tanus
--
This is not really a sig.
http://users.compzone.ca/george/shop/
In article <[email protected]>, [email protected] says...
> Tanus wrote:
> > patrick mitchel wrote:
> >> how bout the udder way round? Now that would get some attention from
> >> the wreckers. Pat
> >>
> >
> > I specifically went to the LV site today to see what lil nasty they were
> > going to pull on us this year. I found the last three years' pranks, but
> > nothing for 2007.
> >
> > Last year on this day, I ran the end of my thumb into a spinning TS
> > blade. It's not much of a saw, and it really should be replaced for a
> > number of reasons, but it does cut thumbs. Not square. Not neat.
> > Certainly not joint-ready. But it cuts them.
> >
> > SWMBO thinks this is a bad day for power tools.
> >
> > Tanus
> >
>
> Oooops. I spoke too soon. LV did put up
> the April 1st page. My bad.
>
>
> Tanus
Don't forget to order one before Midnight tonight!
--
John
"Stephen M" <[email protected]> writes:
>> Can you post a link... site searches O "april" and "Fool" only yeilded the
>> last three years' products.
>>
>
> Found it ... thanks
Search for "AFD" in LV's search page and see all 4 items.
--
Sending unsolicited commercial e-mail to this account incurs a fee of
$500 per message, and acknowledges the legality of this contract.