"SteveH" <[email protected]> wrote in message
news:[email protected]...
> I'm looking to buy a tenoning jig for my table saw. Does anyone have any
> recommendations on what to look for / buy / or stay away from?
>
> Thanks
>
> Steve
>
Have you considered making your own?
http://www.garagewoodworks.com/pictures/tenon_jig.jpg
--
www.garagewoodworks.com
"Edwin Pawlowski" <[email protected]> wrote in message
news:[email protected]...
>
> "SteveH" <[email protected]> wrote in message
> news:[email protected]...
>> I'm looking to buy a tenoning jig for my table saw. Does anyone have any
>> recommendations on what to look for / buy / or stay away from?
>>
>> Thanks
>>
>> Steve
>
> I vote for none of the above. I have a Delta, but since I got a dado
> blade I never us it any more.
>
> I set up a stop block on the fence, set the dado blade to the correct
> height and in about two passes per side I have a perfect tenon.
I too never understood the attraction of the expensive tennoning jig...
They might make a good paper weight.?. :)
>
"Pat Barber" <[email protected]> wrote in message
news:[email protected]...
> I have a Delta for my contractor saw.
>
> It's a pain in the wazoo to set up and is
> in the way the rest of the time.
>
> A good dado set and stop blocks are
> "much" quicker and work just as well.
>
>
> SteveH wrote:
>
> > I'm looking to buy a tenoning jig for my table saw. Does anyone have any
> > recommendations on what to look for / buy / or stay away from?
> >
> > Thanks
> >
> > Steve
> >
> >
This is intended for SteveH
Have you considered buying a tenon cutting router bit? They can be adjusted
to cut different standard thickness tenons very accurately and reference off
of only one edge of the board (which a saw tenon fixture doesn't). I don't
own one, but thought they were a very good idea when I first saw one. I
would buy one of these before I invested in a table saw tenon fixture.
Charley
I have a Delta for my contractor saw.
It's a pain in the wazoo to set up and is
in the way the rest of the time.
A good dado set and stop blocks are
"much" quicker and work just as well.
SteveH wrote:
> I'm looking to buy a tenoning jig for my table saw. Does anyone have any
> recommendations on what to look for / buy / or stay away from?
>
> Thanks
>
> Steve
>
>
"SteveH" <[email protected]> wrote in message
news:[email protected]...
> I'm looking to buy a tenoning jig for my table saw. Does anyone have any
> recommendations on what to look for / buy / or stay away from?
>
> Thanks
>
> Steve
I vote for none of the above. I have a Delta, but since I got a dado blade
I never us it any more.
I set up a stop block on the fence, set the dado blade to the correct height
and in about two passes per side I have a perfect tenon.
On Fri, 11 Apr 2008 22:50:50 -0400, "Edwin Pawlowski" <[email protected]>
wrote:
>I vote for none of the above. I have a Delta, but since I got a dado blade
>I never us it any more.
>
>I set up a stop block on the fence, set the dado blade to the correct height
>and in about two passes per side I have a perfect tenon.
>
Ditto.
No jig here, either. I sold my Delta during a periodic "shop
decluttering"..
---------------------------------------------
** http://www.bburke.com/woodworking.html **
---------------------------------------------