On Jun 21, 2:54 pm, "Max" <[email protected]> wrote:
> I'm looking for opinions on routers in the 2 Hp class.
> I have a DeWalt DW 621 that's Ok but getting old (already?)
> Some recommendations?
>
> Max
Yes. Look into the Milwaukee routers. They make a VS 2.25 HP which
have made me very happy.
r
It may be old but it is still the best in its class.
Next best in 2hp plunge category = Bosch 1166
A good two hp fixed base: 690 LRVS.
For more on slection of routers: http://patwarner.com/selecting_router.html
*******************************************************
On Jun 21, 11:54 am, "Max" <[email protected]> wrote:
> I'm looking for opinions on routers in the 2 Hp class.
> I have a DeWalt DW 621 that's Ok but getting old (already?)
> Some recommendations?
>
> Max
690 LRVS
PW
**********************************************
On Jun 22, 6:06 pm, "Max" <[email protected]> wrote:
> <[email protected]> wrote in message
>
> news:[email protected]...
>
> > It may be old but it is still the best in its class.
> > Next best in 2hp plunge category = Bosch 1166
> > A good two hp fixed base: 690 LRVS.
> > For more on slection of routers:
> >http://patwarner.com/selecting_router.html
> > *******************************************************
>
> > On Jun 21, 11:54 am, "Max" <[email protected]> wrote:
> >> I'm looking for opinions on routers in the 2 Hp class.
> >> I have a DeWalt DW 621 that's Ok but getting old (already?)
> >> Some recommendations?
>
> >> Max
>
> Well, I thank you, Sir, for your reply.
> Here's my situation.
> I'm using the 621 for dadoes. I have a M8V Hitachi for edges but it doesn't
> do 1/2 x 1/2 rabbets very well. I was thinking that a fixed base router in
> the 2HP class would be a good tool for that application. I have a Hitachi
> M12V in the router table and it does a good job. I have another M12V that I
> could use for the rabbets but I would like something a little smaller &
> lighter. sooo.
> What would you suggest? PC 690? DeWalt 618? Milwaukee 5616-20? something
> else?
>
> Thanks,
>
> Max
Robatoy wrote:
> On Jun 21, 2:54 pm, "Max" <[email protected]> wrote:
>> I'm looking for opinions on routers in the 2 Hp class.
>> I have a DeWalt DW 621 that's Ok but getting old (already?)
>> Some recommendations?
>>
>> Max
>
> Yes. Look into the Milwaukee routers. They make a VS 2.25 HP which
> have made me very happy.
>
> r
>
I have the Milwaukee 8625 (or some such) and did maybe 200 linear ft of
3/8" round over yesterday. No complaints from it ... or me. Money well
spent.
My wife was admiring the look of the finished project and mentioned that
it would have taken me much longer without the router and I responded
that, without the router, I'd never have begun the project to begin with.
Bill
---
avast! Antivirus: Outbound message clean.
Virus Database (VPS): 000751-4, 06/23/2007
Tested on: 6/24/2007 1:34:32 AM
avast! - copyright (c) 1988-2007 ALWIL Software.
http://www.avast.com
"Toller" wrote
>
> "Max" wrote ...
>> I'm looking for opinions on routers in the 2 Hp class.
>> I have a DeWalt DW 621 that's Ok but getting old (already?)
>> Some recommendations?
>>
> I have 3 Bosch 1617(8). The nice thing is that when I am looking for a
> collet or wrench, I have several. In your case, I would recommend another
> DW621; or maybe a DW618d if the collets are interchangable. I like D
> handles.
Bosch or DeWalt...hmmm. I'll be checking them out. I'm thinking the DeWalt
618 fixed base plus the plunge base and the "D" handle.
Max
<[email protected]> wrote in message
news:[email protected]...
> It may be old but it is still the best in its class.
> Next best in 2hp plunge category = Bosch 1166
> A good two hp fixed base: 690 LRVS.
> For more on slection of routers:
> http://patwarner.com/selecting_router.html
> *******************************************************
>
>
> On Jun 21, 11:54 am, "Max" <[email protected]> wrote:
>> I'm looking for opinions on routers in the 2 Hp class.
>> I have a DeWalt DW 621 that's Ok but getting old (already?)
>> Some recommendations?
>>
>> Max
Well, I thank you, Sir, for your reply.
Here's my situation.
I'm using the 621 for dadoes. I have a M8V Hitachi for edges but it doesn't
do 1/2 x 1/2 rabbets very well. I was thinking that a fixed base router in
the 2HP class would be a good tool for that application. I have a Hitachi
M12V in the router table and it does a good job. I have another M12V that I
could use for the rabbets but I would like something a little smaller &
lighter. sooo.
What would you suggest? PC 690? DeWalt 618? Milwaukee 5616-20? something
else?
Thanks,
Max
"Max" <[email protected]> wrote in message
news:[email protected]...
> I'm looking for opinions on routers in the 2 Hp class.
> I have a DeWalt DW 621 that's Ok but getting old (already?)
> Some recommendations?
>
> Max
>
Bosch 1617 evs kit
"Max" <[email protected]> wrote in message
news:[email protected]...
> I'm looking for opinions on routers in the 2 Hp class.
> I have a DeWalt DW 621 that's Ok but getting old (already?)
> Some recommendations?
>
I have 3 Bosch 1617(8). The nice thing is that when I am looking for a
collet or wrench, I have several. In your case, I would recommend another
DW621; or maybe a DW618d if the collets are interchangable. I like D
handles.
Well, by George....er.....by Pat, I will get one. Thanks.
Max
<[email protected]> wrote in message
news:[email protected]...
> 690 LRVS
> PW
> **********************************************
>
>
>
> On Jun 22, 6:06 pm, "Max" <[email protected]> wrote:
>> <[email protected]> wrote in message
>>
>> news:[email protected]...
>>
>> > It may be old but it is still the best in its class.
>> > Next best in 2hp plunge category = Bosch 1166
>> > A good two hp fixed base: 690 LRVS.
>> > For more on slection of routers:
>> >http://patwarner.com/selecting_router.html
>> > *******************************************************
>>
>> > On Jun 21, 11:54 am, "Max" <[email protected]> wrote:
>> >> I'm looking for opinions on routers in the 2 Hp class.
>> >> I have a DeWalt DW 621 that's Ok but getting old (already?)
>> >> Some recommendations?
>>
>> >> Max
>>
>> Well, I thank you, Sir, for your reply.
>
>
>
>> Here's my situation.
>> I'm using the 621 for dadoes. I have a M8V Hitachi for edges but it
>> doesn't
>> do 1/2 x 1/2 rabbets very well. I was thinking that a fixed base router
>> in
>> the 2HP class would be a good tool for that application. I have a
>> Hitachi
>> M12V in the router table and it does a good job. I have another M12V
>> that I
>> could use for the rabbets but I would like something a little smaller &
>> lighter. sooo.
>> What would you suggest? PC 690? DeWalt 618? Milwaukee 5616-20?
>> something
>> else?
>>
>> Thanks,
>>
>> Max
>
>