I want a brass machine screw pan head or round head(prefer pan head) slotted
1/4-20 and the hard part 2.25" long. I can find 2" and 2.5" but I can only find
stainless steel in the 2.25" length.
--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.
On Wed, 23 Mar 2005 21:21:42 -0800, the inscrutable Steve Knight
<[email protected]> spake:
>>I use an angle grinder. It's one of the few ways I have of cutting
>>screws without needing to re-form the thread afterwards. If you're
>>doing a lot, make up a cutting plate with a row of threaded holes in
>>it. Choice of cutting disk is crucial though, for a neat cut.
>
>you don't want to cut brass with a angle grinder. well maybe not it may just
>clog up the wheels.
> but I don't want to have to cut them to size it gets old quick after the first
>100 or so (G)
Make a jig and let your SWMBO hacksaw and file 'em. ;)
--
Put some color in your cheeks: Garden Naked!
------
www.diversify.com Colorful Website Development
WOW, 10 messages, not counting this one, and one answer!
WIlson
"Steve Knight" <[email protected]> wrote in message
news:[email protected]...
>I want a brass machine screw pan head or round head(prefer pan head)
>slotted
> 1/4-20 and the hard part 2.25" long. I can find 2" and 2.5" but I can only
> find
> stainless steel in the 2.25" length.
>
> --
> Knight-Toolworks & Custom Planes
> Custom made wooden planes at reasonable prices
> See http://www.knight-toolworks.com For prices and ordering instructions.
Used something like that several decades ago, but haven't seen them since. The
one I used was a bit smaller, and we used it with a vise or press. Could cut a
number of screws at once.
GerryG
On Wed, 23 Mar 2005 21:27:58 -0800, Steve Knight <[email protected]>
wrote:
>On Wed, 23 Mar 2005 08:35:03 -0800, "Teamcasa" <[email protected]> wrote:
>
>>Steve
>>Try one of these - very handy!
>>http://www.aircraftspruce.com/catalog/topages/screwboltshear.php
>
>cool I knew there had to be something. do you hit it with a hammer?
Steve Knight wrote:
> I want a brass machine screw pan head or round head(prefer pan head) slotted
> 1/4-20 and the hard part 2.25" long. I can find 2" and 2.5" but I can only find
> stainless steel in the 2.25" length.
How many do you need?
Can probably special order them if you are willing to buy 500/1,000
minimum and wait probably 6-8 weeks since the almost certainly come in
for off shore.
Any thing from 50-499 could be trimed in a lathe or maybe a screw machine.
Anything below 50 would be hack saw time.
HTH
Lew
On Wed, 23 Mar 2005 21:28:27 -0800, Steve Knight <[email protected]> wrote:
> On Wed, 23 Mar 2005 18:00:57 -0600, John <[email protected]> wrote:
>
>>Get it in 2.5 and trim down to 2.25??
>
> you offering to do 300 or so a year for me?? (G)
With a milling machine and a jig, you could do it pretty quickly.
Block 2.25" thick, drilled and tapped. Screws in from the bottom, mill
the ends off. No muss, no fuss. Beats playing bandsaw games...
Dave Hinz
On Thu, 24 Mar 2005 09:10:18 -0800, Steve Knight <[email protected]> wrote:
>
>
>>With a milling machine and a jig, you could do it pretty quickly.
>>Block 2.25" thick, drilled and tapped. Screws in from the bottom, mill
>>the ends off. No muss, no fuss. Beats playing bandsaw games...
>
> if I only had a milling machine (G)
How many a year are we talking about? And what part of the world are you
in? I've got a bench-top mill that I don't use, next to my big mill...
On Thu, 24 Mar 2005 21:50:51 -0800, Steve Knight <[email protected]> wrote:
>
>
>>How many a year are we talking about? And what part of the world are you
>>in? I've got a bench-top mill that I don't use, next to my big mill...
>
> about 300 or so. here in Portland Oregon and I could use a mill. can you use
> planes?
The mill is in Milwaukee and I'd think you could find as good of a mill
locally for less than shipping would cost. But, let me mock up a jig
and see if it will do what I think it will do before we go further.
Did you say these are stainless, or brass screws that you're trying to trim?
Dave
On Fri, 25 Mar 2005 01:21:08 -0500, Bill <[email protected]> wrote:
> On Wed, 23 Mar 2005 09:13:58 -0800, Steve Knight wrote:
>
>>
>>>> Anything below 50 would be hack saw time.
>>>>
>>>My first thought was hacksaw, or maybe even a grinder.
>>
>> I would use maybe 300 or so a year.
>> forget hacksaw I use a steel shear (G) but just the hassle and time to cut
>> them all and sand the ends and buff off the bur is something I could live
>> without.
>
> So don't. Put a nut on before cutting. After cutting run the nut off.
> There, the thread is back where it's supposed to be (or nearly enough to
> use).
That's what I'm thinking with a drilled/tapped block, it'll form the
thread back into shape when you back the screws out of it. Steve, will
the ends of these bolts be visible in your finished product? If
there's a burr there, will that need to be cleaned up?
Dave
On Wed, 23 Mar 2005 21:38:09 -0800, the inscrutable Steve Knight
<[email protected]> spake:
>
>>OUCH!
>>
>>
>>>for some reason fastenal did not come up in google. I found them rigth befroe I
>>>read this message. man they are spendy stainless is only .21 each.
>>
>>Call and ask for bulk pricing. It's ALWAYS a whole lot cheaper.
>
>I can get 2.5" long ones for .40 each. stainless about .21 each 2.25" long
Hell, they're brass. Jig it up on the bandsaw and cut 8 at once.
Sanding goes quickly. You or some kid you hire will be done in an
hour.
--
Put some color in your cheeks: Garden Naked!
------
www.diversify.com Colorful Website Development
On Wed, 23 Mar 2005 15:53:37 -0500, "No" <[email protected]> wrote:
>Are they really .82 EACH???
it's not a lot till you order say 100 then it's 82 bucks. I get boxes of 1" ones
for about 21. each. a little over double the length and quad the price.
--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.
Get it in 2.5 and trim down to 2.25??
John
On Tue, 22 Mar 2005 22:47:00 -0800, Steve Knight
<[email protected]> wrote:
>I want a brass machine screw pan head or round head(prefer pan head) slotted
>1/4-20 and the hard part 2.25" long. I can find 2" and 2.5" but I can only find
>stainless steel in the 2.25" length.
Steve
Try one of these - very handy!
http://www.aircraftspruce.com/catalog/topages/screwboltshear.php
Dave
"Steve Knight" <[email protected]> wrote in message
news:[email protected]...
>I want a brass machine screw pan head or round head(prefer pan head)
>slotted
> 1/4-20 and the hard part 2.25" long. I can find 2" and 2.5" but I can only
> find
> stainless steel in the 2.25" length.
>
> --
> Knight-Toolworks & Custom Planes
> Custom made wooden planes at reasonable prices
> See http://www.knight-toolworks.com For prices and ordering instructions.
Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com
Hammer or press, it works very nice.
Dave
"Steve Knight" <[email protected]> wrote in message
news:[email protected]...
> On Wed, 23 Mar 2005 08:35:03 -0800, "Teamcasa" <[email protected]>
> wrote:
>
>>Steve
>>Try one of these - very handy!
>>http://www.aircraftspruce.com/catalog/topages/screwboltshear.php
>
> cool I knew there had to be something. do you hit it with a hammer?
>
> --
> Knight-Toolworks & Custom Planes
> Custom made wooden planes at reasonable prices
> See http://www.knight-toolworks.com For prices and ordering instructions.
Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com
>I use an angle grinder. It's one of the few ways I have of cutting
>screws without needing to re-form the thread afterwards. If you're
>doing a lot, make up a cutting plate with a row of threaded holes in
>it. Choice of cutting disk is crucial though, for a neat cut.
you don't want to cut brass with a angle grinder. well maybe not it may just
clog up the wheels.
but I don't want to have to cut them to size it gets old quick after the first
100 or so (G)
--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.
On Wed, 23 Mar 2005 08:35:03 -0800, "Teamcasa" <[email protected]> wrote:
>Steve
>Try one of these - very handy!
>http://www.aircraftspruce.com/catalog/topages/screwboltshear.php
cool I knew there had to be something. do you hit it with a hammer?
--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.
>Hell, they're brass. Jig it up on the bandsaw and cut 8 at once.
>Sanding goes quickly. You or some kid you hire will be done in an
>hour.
that's not a bad idea really bit I think I will stick with ss. I like panhead
over the round head and they are easy to get anywhere.
--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.
[email protected] wrote:
> Cut the 2.5" off at 2.25 or is this just spam?
>
He probably needs a *lot* of them. <G>
Steve isn't a spammer.
Barry
<[email protected]> wrote in message
news:[email protected]...
> Cut the 2.5" off at 2.25 or is this just spam?
>
Spam.... ? Not in this case.
On Wed, 23 Mar 2005 21:38:09 -0800, the inscrutable Steve Knight
<[email protected]> spake:
I said:
>>Call and ask for bulk pricing. It's ALWAYS a whole lot cheaper.
>
>I can get 2.5" long ones for .40 each. stainless about .21 each 2.25" long
But what'd they say about bulk pricing on 2.25" brass, the size you
want?
--
Put some color in your cheeks: Garden Naked!
------
www.diversify.com Colorful Website Development
>How many a year are we talking about? And what part of the world are you
>in? I've got a bench-top mill that I don't use, next to my big mill...
about 300 or so. here in Portland Oregon and I could use a mill. can you use
planes?
so many things I want to do so few tools (G)
--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.
On Wed, 23 Mar 2005 18:00:57 -0600, John <[email protected]> wrote:
>Get it in 2.5 and trim down to 2.25??
you offering to do 300 or so a year for me?? (G)
--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.
On Wed, 23 Mar 2005 13:32:10 GMT, "Diane Miller" <[email protected]> wrote:
>www.fastenal.com
>
>
>The following link is to the screw...
>
>http://www.fastenal.com/web/products/detail.ex?sku=0152076
for some reason fastenal did not come up in google. I found them rigth befroe I
read this message. man they are spendy stainless is only .21 each.
--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.
"Lew Hodgett" <[email protected]> wrote in message
news:[email protected]...
> Steve Knight wrote:
> > I want a brass machine screw pan head or round head(prefer pan head)
slotted
> > 1/4-20 and the hard part 2.25" long. I can find 2" and 2.5" but I can
only find
> > stainless steel in the 2.25" length.
>
> How many do you need?
>
> Can probably special order them if you are willing to buy 500/1,000
> minimum and wait probably 6-8 weeks since the almost certainly come in
> for off shore.
>
> Any thing from 50-499 could be trimed in a lathe or maybe a screw machine.
>
> Anything below 50 would be hack saw time.
>
My first thought was hacksaw, or maybe even a grinder.
--
Nahmie
Those on the cutting edge bleed a lot.
Are they really .82 EACH???
"Steve Knight" <[email protected]> wrote in message
news:[email protected]...
> On Wed, 23 Mar 2005 13:32:10 GMT, "Diane Miller" <[email protected]>
> wrote:
>
>>www.fastenal.com
>>
>>
>>The following link is to the screw...
>>
>>http://www.fastenal.com/web/products/detail.ex?sku=0152076
>
> for some reason fastenal did not come up in google. I found them rigth
> befroe I
> read this message. man they are spendy stainless is only .21 each.
>
> --
> Knight-Toolworks & Custom Planes
> Custom made wooden planes at reasonable prices
> See http://www.knight-toolworks.com For prices and ordering instructions.
>With a milling machine and a jig, you could do it pretty quickly.
>Block 2.25" thick, drilled and tapped. Screws in from the bottom, mill
>the ends off. No muss, no fuss. Beats playing bandsaw games...
if I only had a milling machine (G)
--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.
It was somewhere outside Barstow when [email protected] wrote:
>Cut the 2.5" off at 2.25 or is this just spam?
If it were spam it would be offering to lengthen it.
On Wed, 23 Mar 2005 09:16:07 -0800, the inscrutable Steve Knight
<[email protected]> spake:
>>The following link is to the screw...
>>
>>http://www.fastenal.com/web/products/detail.ex?sku=0152076
OUCH!
>for some reason fastenal did not come up in google. I found them rigth befroe I
>read this message. man they are spendy stainless is only .21 each.
Call and ask for bulk pricing. It's ALWAYS a whole lot cheaper.
--
Put some color in your cheeks: Garden Naked!
------
www.diversify.com Colorful Website Development
>OUCH!
>
>
>>for some reason fastenal did not come up in google. I found them rigth befroe I
>>read this message. man they are spendy stainless is only .21 each.
>
>Call and ask for bulk pricing. It's ALWAYS a whole lot cheaper.
I can get 2.5" long ones for .40 each. stainless about .21 each 2.25" long
--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.
On Wed, 23 Mar 2005 09:13:58 -0800, Steve Knight wrote:
>
>>> Anything below 50 would be hack saw time.
>>>
>>My first thought was hacksaw, or maybe even a grinder.
>
> I would use maybe 300 or so a year.
> forget hacksaw I use a steel shear (G) but just the hassle and time to cut
> them all and sand the ends and buff off the bur is something I could live
> without.
So don't. Put a nut on before cutting. After cutting run the nut off.
There, the thread is back where it's supposed to be (or nearly enough to
use).
>> Anything below 50 would be hack saw time.
>>
>My first thought was hacksaw, or maybe even a grinder.
I would use maybe 300 or so a year.
forget hacksaw I use a steel shear (G) but just the hassle and time to cut
them all and sand the ends and buff off the bur is something I could live
without.
--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.
It was somewhere outside Barstow when Steve Knight
<[email protected]> wrote:
>I would use maybe 300 or so a year.
> forget hacksaw I use a steel shear (G)
I use an angle grinder. It's one of the few ways I have of cutting
screws without needing to re-form the thread afterwards. If you're
doing a lot, make up a cutting plate with a row of threaded holes in
it. Choice of cutting disk is crucial though, for a neat cut.
www.fastenal.com
The following link is to the screw...
http://www.fastenal.com/web/products/detail.ex?sku=0152076
Eddie
"Steve Knight" <[email protected]> wrote in message
news:[email protected]...
> I want a brass machine screw pan head or round head(prefer pan head)
slotted
> 1/4-20 and the hard part 2.25" long. I can find 2" and 2.5" but I can only
find
> stainless steel in the 2.25" length.
>
> --
> Knight-Toolworks & Custom Planes
> Custom made wooden planes at reasonable prices
> See http://www.knight-toolworks.com For prices and ordering instructions.
>That's what I'm thinking with a drilled/tapped block, it'll form the
>thread back into shape when you back the screws out of it. Steve, will
>the ends of these bolts be visible in your finished product? If
>there's a burr there, will that need to be cleaned up?
no you won't see them so as long as they thread in easily it does not matter
what they look like.
--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.