I've just ordered plans and the hardware kit for making a lap harp.
I'm going to make the wooden parts myself using curly cherry. Does
anyone have a suggestion for a good source for the cherry? Also, I
would appreciate any advice from people who have made harps or other
musical instruments. Thanks, Donna Menke
On May 21, 11:38 am, Jim Willemin <jim***willemin@hot***mail.com>
wrote:
> Donna <[email protected]> wrote in news:1179753275.362797.62900
> @b40g2000prd.googlegroups.com:
>
> > I've just ordered plans and the hardware kit for making a lap harp.
> > I'm going to make the wooden parts myself using curly cherry. Does
> > anyone have a suggestion for a good source for the cherry? Also, I
> > would appreciate any advice from people who have made harps or other
> > musical instruments. Thanks, Donna Menke
>
> What are you going to use for the soundboard? And is cherry strong enough
> for the arch? The strings exert a *lot* of force on the structure. (No, I
> haven't made a harp, but have played lap harps...)
I ordered the soundboard and back board with the hardware kit and
plans. They offered the kits in walnut or cherry so I thnk I'm safe
there. I don't think the figured quality would be less strong. I
received the kit yesterday but they sent the wrong back- in walnut. We
are getting that straightened out now.
So Jim- how hard is it to play a harp- since I don't read music and
seem to be kinda tone deaf? Donna Menke
On May 23, 7:24 pm, [email protected] (J T) wrote:
> Mon, May 21, 2007, 6:14am (EDT-3) [email protected] (Donna) doth posteth
> thusly:
> I've just ordered plans and the hardware kit for making a lap harp. I'm
> going to make the wooden parts myself using curly cherry. Does anyone
> have a suggestion for a good source for the cherry? Also, I would
> appreciate any advice from people who have made harps or other musical
> instruments.
>
> I've got instructions stuck away for making a small Celtic type
> harp. I'll get to it, one day. If I recall right, uses mostly plywood.
>
> In the early '70s, made a dulcimer from a kit. It was mostly 1/8"
> luan plywood. Went together fast and easy, and sounded good.
>
> Just finished watching How It's Made. They made a cross between a
> large Celtic and orchestral harp. Surprising how much was made from
> plywood. Solid wood wouldn't have given the strength needed. Varnish
> brushed on, not sprayed, apparently they don't get too anal about a
> really shiny and slick finish. Tuned using an electronic tuner of some
> sort.
>
> As an aside, then they showed how electic violins are made. Then
> they colored parts of it weird, part natural wood, but it did sound
> good.
>
> JOAT
> What is life without challenge and a constant stream of new
> humiliations?
> - Peter Egan
I did get the Korg electronic tuner with my order. Tone-deaf,
remember.
They sent the wrong back piece, in walnut instead of the ordered
cherry, but they have sent off a replacement already. Good folk. Now,
I'm seriously considering making one out of plain walnut first- as a
practice piece. I can use everything I ordered to make it, and when I
want to make the one out of curly cherry I'll still have everything I
need except for the hardware pack and another soundboard. And if I'm
going to make a mistake it will be on the much less expensive walnut.
Then hubby and I can play duets!? Hah. He is even less of a musician
than I am- if possible.
How can I find "How It's Made" for harp making? Can you post a link,
please. I tried googling it but didn't find it. I have a DVD coming
too, but this sounds interesting.
In case anyone is curious, this is the one I'm making:
http://www.musikit.com/Merchant2/merchant.mvc?Screen=CTGY&Category_Code=lim
Can't wait to get started.
Does anyone know how to set up these groups so that I'd get
notification for a topic in which I'm participating? As it is I get a
synopsis every morning, but I have to go to my profile to see the
topics I've commented on. On my Yahoo! groups I get every posting
individually into my mailbox, but that would be way too many with this
group. Thanks- Donna Menke
On May 24, 6:09 pm, [email protected] wrote:
> On Thu, 24 May 2007 10:54:14 -0400, [email protected] (J T)
> wrote:
>
> >Thu, May 24, 2007, 6:28am (EDT-3) [email protected] (Donna) doth
> >queryeth:
> ><snip> How can I find "How It's Made" forharpmaking? Can you post a
> >link, please. I tried googling it but didn't find it. <snip>
>
> > What can I say?
> >http://www.google.com/search?hl=en&ie=ISO-8859-1&q=HOW+IT%27S+MADE
>
> >JOAT
> >What is life without challenge and a constant stream of new
> >humiliations?
> >- Peter Egan
>
> http://science.discovery.com/tv-schedules/series.html?paid=48.13776.1...
>
> Hope this helps.
Hi Guys,
thought some may want to see how I'm getting along, so I've made a
blog on making the harp.
Check it out: http://harpmaking.blogspot.com/
Thanks,
Donna
On Jun 12, 7:40 pm, [email protected] (J T) wrote:
> Tue, Jun 12, 2007, 2:22am (EDT+4) [email protected] (Donna)
> Hi Guys,
> thought some may want to see how I'm getting along, so I've made a blog
> on making the harp.
> Check it out:http://harpmaking.blogspot.com/Thanks,
> Donna
>
> Neat. Now if I could just remember what cartoon character used
> one just like it for shooting arrows like a machine gun.
>
> Did you ever get to see the harp on How it's Made?
>
> JOAT
> If a man does his best, what else is there?
> - General George S. Patton
No, I don't get cable or the Discovery Channel, though I've seen it
now and then in motels when traveling. I've tried to see it online but
they just refer me to the TV stations. I'll bet it is interesting, and
I would very much enjoy seeing it.
Thanks for the reference anyhow. Maybe I'll see it someday.
In the meantime though I've got to tell you about how I was a brave
woman today. I used my dado set for the first time (I've had it for 6
years), cut up through a zero clearance insert plate, and then did it
again at 9 degrees. That took all the balls I got. My heart was
jumping like a jumping bean. I have a hate/hate relationship with my
table saw and just making a simple cut is almost more excitement then
I can take. The things I do for this harp. . .lol
I'll post some more photos on the blog tomorrow. The soundbox is
nearing completion- I worked on it for 5 hours today.
Donna
On Jun 13, 12:20 am, [email protected] (J T) wrote:
> Wed, Jun 13, 2007, 2:39am (EDT+4) [email protected] (Donna) doth sayeth:
> No, I don't get cable or the Discovery Channel, <snip>
> I have a hate/hate relationship with my table saw and just making a
> simple cut is almost more excitement then I can take. <snip>
>
> How It's Made is worth the cost of cable. One of the main reason's
> I got cable in the first place was Monster Garage.
>
> Ooo, I think you've got the wront attitude toward your saw. You
> should have a "this machine scares the crap out of me" attitude instead.
> Hate/hate, you're likely to get careless, trying to get t all over in a
> hurry. Scared, you pay a lot of attention to what you're up to, and
> stay out of the line fire in case of a kickback; always use push sticks,
> so you don't have kickbacks; and, especially, to keep your body parts
> out of the whirly parts. Works for me.
>
> JOAT
> If a man does his best, what else is there?
> - General George S. Patton
Well- I may have been exaggerating just a little. If I can get the job
done with any other tool (not counting the router-which is at about
the same level as the TS) I do. The band saw and sanders are my tools
of choice- that is why that is all I use for making boxes. So for
making a 1/8" wide groove 1/4" from the edge of a long board, 1/4"
deep- I'm gonna bite the bullet and use the TS. A kick back way back
in 1973 got me in the hip bone and it hurt- scared me too- and I have
a long memory for things like that. Can't remember what had for lunch
yesterday- but I remember that kick back.
Actually I taught power tool use for 6 years and managed to get over
my fear but not my caution. I use the Grrripper and that helps a lot.
I feed mostly from the side- like I taught my ladies. their 'chest'
got in the way of reaching across the saw- especially if they were
short and stout. We all ended up keeping our body parts. Off for a 12
mile bike ride then will see how the dado set works- take some photos-
post them on the blog, probably by 5. Donna
On Jun 13, 7:51 am, Donna <[email protected]> wrote:
> On Jun 13, 12:20 am, [email protected] (J T) wrote:
>
>
>
> > Wed, Jun 13, 2007, 2:39am (EDT+4) [email protected] (Donna) doth sayeth:
> > No, I don't get cable or the Discovery Channel, <snip>
> > I have a hate/hate relationship with my table saw and just making a
> > simple cut is almost more excitement then I can take. <snip>
>
> > How It's Made is worth the cost of cable. One of the main reason's
> > I got cable in the first place was Monster Garage.
>
> > Ooo, I think you've got the wront attitude toward your saw. You
> > should have a "this machine scares the crap out of me" attitude instead.
> > Hate/hate, you're likely to get careless, trying to get t all over in a
> > hurry. Scared, you pay a lot of attention to what you're up to, and
> > stay out of the line fire in case of a kickback; always use push sticks,
> > so you don't have kickbacks; and, especially, to keep your body parts
> > out of the whirly parts. Works for me.
>
> > JOAT
> > If a man does his best, what else is there?
> > - General George S. Patton
>
> Well- I may have been exaggerating just a little. If I can get the job
> done with any other tool (not counting the router-which is at about
> the same level as the TS) I do. The band saw and sanders are my tools
> of choice- that is why that is all I use for making boxes. So for
> making a 1/8" wide groove 1/4" from the edge of a long board, 1/4"
> deep- I'm gonna bite the bullet and use the TS. A kick back way back
> in 1973 got me in the hip bone and it hurt- scared me too- and I have
> a long memory for things like that. Can't remember what had for lunch
> yesterday- but I remember that kick back.
> Actually I taught power tool use for 6 years and managed to get over
> my fear but not my caution. I use the Grrripper and that helps a lot.
> I feed mostly from the side- like I taught my ladies. their 'chest'
> got in the way of reaching across the saw- especially if they were
> short and stout. We all ended up keeping our body parts. Off for a 12
> mile bike ride then will see how the dado set works- take some photos-
> post them on the blog, probably by 5. Donna
Just updated the blog- http://harpmaking.blogspot.com/
Donna
Wed, Jun 13, 2007, 2:39am (EDT+4) [email protected] (Donna) doth sayeth:
No, I don't get cable or the Discovery Channel, <snip>
I have a hate/hate relationship with my table saw and just making a
simple cut is almost more excitement then I can take. <snip>
How It's Made is worth the cost of cable. One of the main reason's
I got cable in the first place was Monster Garage.
Ooo, I think you've got the wront attitude toward your saw. You
should have a "this machine scares the crap out of me" attitude instead.
Hate/hate, you're likely to get careless, trying to get t all over in a
hurry. Scared, you pay a lot of attention to what you're up to, and
stay out of the line fire in case of a kickback; always use push sticks,
so you don't have kickbacks; and, especially, to keep your body parts
out of the whirly parts. Works for me.
JOAT
If a man does his best, what else is there?
- General George S. Patton
Tue, Jun 12, 2007, 2:22am (EDT+4) [email protected] (Donna)
Hi Guys,
thought some may want to see how I'm getting along, so I've made a blog
on making the harp.
Check it out: http://harpmaking.blogspot.com/ Thanks,
Donna
Neat. Now if I could just remember what cartoon character used
one just like it for shooting arrows like a machine gun.
Did you ever get to see the harp on How it's Made?
JOAT
If a man does his best, what else is there?
- General George S. Patton
Thu, May 24, 2007, 6:28am (EDT-3) [email protected] (Donna) doth
queryeth:
<snip> How can I find "How It's Made" for harp making? Can you post a
link, please. I tried googling it but didn't find it. <snip>
What can I say?
http://www.google.com/search?hl=en&ie=ISO-8859-1&q=HOW+IT%27S+MADE
JOAT
What is life without challenge and a constant stream of new
humiliations?
- Peter Egan
"Donna" wrote in message
> Hi Guys,
> thought some may want to see how I'm getting along, so I've made a
> blog on making the harp.
> Check it out: http://harpmaking.blogspot.com/
Great ... keep the information coming. I've recorded my share of harps, from
Celtic to pedal, in the studio (AAMOF, at one time recorded an album with 10
various size harps, with a couple of cuts of them all playing at the same
time ... talk about making the air in a room vibrate!).
This site http://www.folkharp.com/ is run by a harpist friend and recording
client for many years and is a good source for harp related items and music.
Looks like a real fun project and one I don't think I would even attempt,
although looking at your other work I'm sure you'll do well. Did you happen
to catch the harp making segment of that Discovery Channel show? Intriguing
process.
Keep up the good work.
--
www.e-woodshop.net
Last update: 6/1/07
KarlC@ (the obvious)
On Thu, 24 May 2007 10:54:14 -0400, [email protected] (J T)
wrote:
>Thu, May 24, 2007, 6:28am (EDT-3) [email protected] (Donna) doth
>queryeth:
><snip> How can I find "How It's Made" for harp making? Can you post a
>link, please. I tried googling it but didn't find it. <snip>
>
> What can I say?
>http://www.google.com/search?hl=en&ie=ISO-8859-1&q=HOW+IT%27S+MADE
>
>
>
>JOAT
>What is life without challenge and a constant stream of new
>humiliations?
>- Peter Egan
http://science.discovery.com/tv-schedules/series.html?paid=48.13776.117072.9505.8&start=30
Hope this helps.
Mon, May 21, 2007, 6:14am (EDT-3) [email protected] (Donna) doth posteth
thusly:
I've just ordered plans and the hardware kit for making a lap harp. I'm
going to make the wooden parts myself using curly cherry. Does anyone
have a suggestion for a good source for the cherry? Also, I would
appreciate any advice from people who have made harps or other musical
instruments.
I've got instructions stuck away for making a small Celtic type
harp. I'll get to it, one day. If I recall right, uses mostly plywood.
In the early '70s, made a dulcimer from a kit. It was mostly 1/8"
luan plywood. Went together fast and easy, and sounded good.
Just finished watching How It's Made. They made a cross between a
large Celtic and orchestral harp. Surprising how much was made from
plywood. Solid wood wouldn't have given the strength needed. Varnish
brushed on, not sprayed, apparently they don't get too anal about a
really shiny and slick finish. Tuned using an electronic tuner of some
sort.
As an aside, then they showed how electic violins are made. Then
they colored parts of it weird, part natural wood, but it did sound
good.
JOAT
What is life without challenge and a constant stream of new
humiliations?
- Peter Egan
On 24 May 2007 06:28:19 -0700, Donna <[email protected]> wrote:
>On May 23, 7:24 pm, [email protected] (J T) wrote:
>> Mon, May 21, 2007, 6:14am (EDT-3) [email protected] (Donna) doth posteth
>> thusly:
>> I've just ordered plans and the hardware kit for making a lap harp. I'm
>> going to make the wooden parts myself using curly cherry. Does anyone
>> have a suggestion for a good source for the cherry? Also, I would
>> appreciate any advice from people who have made harps or other musical
>> instruments.
>>
>> I've got instructions stuck away for making a small Celtic type
>> harp. I'll get to it, one day. If I recall right, uses mostly plywood.
>>
>> In the early '70s, made a dulcimer from a kit. It was mostly 1/8"
>> luan plywood. Went together fast and easy, and sounded good.
>>
>> Just finished watching How It's Made. They made a cross between a
>> large Celtic and orchestral harp. Surprising how much was made from
>> plywood. Solid wood wouldn't have given the strength needed. Varnish
>> brushed on, not sprayed, apparently they don't get too anal about a
>> really shiny and slick finish. Tuned using an electronic tuner of some
>> sort.
>>
>> As an aside, then they showed how electic violins are made. Then
>> they colored parts of it weird, part natural wood, but it did sound
>> good.
>>
>> JOAT
>> What is life without challenge and a constant stream of new
>> humiliations?
>> - Peter Egan
>
>I did get the Korg electronic tuner with my order. Tone-deaf,
>remember.
>They sent the wrong back piece, in walnut instead of the ordered
>cherry, but they have sent off a replacement already. Good folk. Now,
>I'm seriously considering making one out of plain walnut first- as a
>practice piece. I can use everything I ordered to make it, and when I
>want to make the one out of curly cherry I'll still have everything I
>need except for the hardware pack and another soundboard. And if I'm
>going to make a mistake it will be on the much less expensive walnut.
>Then hubby and I can play duets!? Hah. He is even less of a musician
>than I am- if possible.
>How can I find "How It's Made" for harp making? Can you post a link,
>please. I tried googling it but didn't find it. I have a DVD coming
>too, but this sounds interesting.
>In case anyone is curious, this is the one I'm making:
>http://www.musikit.com/Merchant2/merchant.mvc?Screen=CTGY&Category_Code=lim
>Can't wait to get started.
>Does anyone know how to set up these groups so that I'd get
>notification for a topic in which I'm participating? As it is I get a
>synopsis every morning, but I have to go to my profile to see the
>topics I've commented on. On my Yahoo! groups I get every posting
>individually into my mailbox, but that would be way too many with this
>group. Thanks- Donna Menke
hey donna
heres a group you may find fits the bill
you can get email notification
also many music builders hang ou there
http://www.woodworkforums.ubeaut.com.au/index.php
scroll down the list till you find "musical instruments" forum
there are many other forums as well - woodwork related
Donna <[email protected]> wrote in news:1179753275.362797.62900
@b40g2000prd.googlegroups.com:
> I've just ordered plans and the hardware kit for making a lap harp.
> I'm going to make the wooden parts myself using curly cherry. Does
> anyone have a suggestion for a good source for the cherry? Also, I
> would appreciate any advice from people who have made harps or other
> musical instruments. Thanks, Donna Menke
>
What are you going to use for the soundboard? And is cherry strong enough
for the arch? The strings exert a *lot* of force on the structure. (No, I
haven't made a harp, but have played lap harps...)
Donna <[email protected]> wrote in
news:[email protected]:
> On May 21, 11:38 am, Jim Willemin <jim***willemin@hot***mail.com>
> wrote:
>> Donna <[email protected]> wrote in news:1179753275.362797.62900
>> @b40g2000prd.googlegroups.com:
>>
>> > I've just ordered plans and the hardware kit for making a lap harp.
>> > I'm going to make the wooden parts myself using curly cherry. Does
>> > anyone have a suggestion for a good source for the cherry? Also, I
>> > would appreciate any advice from people who have made harps or
>> > other musical instruments. Thanks, Donna Menke
>>
>> What are you going to use for the soundboard? And is cherry strong
>> enough for the arch? The strings exert a *lot* of force on the
>> structure. (No, I haven't made a harp, but have played lap harps...)
>
> I ordered the soundboard and back board with the hardware kit and
> plans. They offered the kits in walnut or cherry so I thnk I'm safe
> there. I don't think the figured quality would be less strong. I
> received the kit yesterday but they sent the wrong back- in walnut. We
> are getting that straightened out now.
> So Jim- how hard is it to play a harp- since I don't read music and
> seem to be kinda tone deaf? Donna Menke
>
Somewhat harder than I can manage, unfortunately. I just plinked around a
bit, but didn't practice enough to actually make much music. However, the
colored strings help a lot in finding where you are in the scale. Best of
good luck, Donna, and most of all, have fun! (by the way, electonic tuners
(e.g. Korg) are your friends - your very, very good friends :) )
On 21 May 2007 06:14:35 -0700, Donna <[email protected]> wrote:
>I've just ordered plans and the hardware kit for making a lap harp.
>I'm going to make the wooden parts myself using curly cherry. Does
>anyone have a suggestion for a good source for the cherry? Also, I
>would appreciate any advice from people who have made harps or other
>musical instruments. Thanks, Donna Menke
No advice but a URL.
http://www.hearnehardwoods.com/index.html
Mark