I have seen cool blocks recommended here many time.
A book I got from the library said that steel blocks are badly unrated.
Heat is not a problem; the only reason not to use them is that they will not
support a really small blade properly without risking damage to the teeth.
Then he recommends maple blocks; they wear out faster than cool blocks, but
are free.
Also, I have seen a composite block on ebay that claims it is better than
cool blocks. Anyone tried it?
Comments?
Toller wrote:
> I have seen cool blocks recommended here many time.
>
> A book I got from the library said that steel blocks are badly unrated.
> Heat is not a problem; the only reason not to use them is that they will not
> support a really small blade properly without risking damage to the teeth.
> Then he recommends maple blocks; they wear out faster than cool blocks, but
> are free.
>
> Also, I have seen a composite block on ebay that claims it is better than
> cool blocks. Anyone tried it?
>
> Comments?
I use cool blocks or wood when I'm using a small blade that I want to
bury in the guide blocks.
For larger blades, steel or even high speed steel tool bits. The HSS
bits take longer to grind to shape, but wear forever. Just don't hit
one with the teeth.
John Martin
"Toller" <[email protected]> wrote in message
news:[email protected]...
>I have seen cool blocks recommended here many time.
>
> A book I got from the library said that steel blocks are badly unrated.
> Heat is not a problem; the only reason not to use them is that they will
> not support a really small blade properly without risking damage to the
> teeth. Then he recommends maple blocks; they wear out faster than cool
> blocks, but are free.
>
> Also, I have seen a composite block on ebay that claims it is better than
> cool blocks. Anyone tried it?
>
> Comments?
I'm ceramic now. Slicker than snot, don't wear at all, and with most of my
bandsaw work either resaw or green wood, they're great. I keep a set of
phenolics around for 1/4" and smaller blades.
Used end-grain red oak at school to protect from the kids. Cheap and
effective.
On Thu, 30 Mar 2006 18:01:32 GMT, "Toller" <[email protected]> wrote:
>I have seen cool blocks recommended here many time.
>
>A book I got from the library said that steel blocks are badly unrated.
>Heat is not a problem; the only reason not to use them is that they will not
>support a really small blade properly without risking damage to the teeth.
>Then he recommends maple blocks; they wear out faster than cool blocks, but
>are free.
>
>Also, I have seen a composite block on ebay that claims it is better than
>cool blocks. Anyone tried it?
>
>Comments?
>
I switched to the cool blocks a year ago on a saw that sees almost daily use.. I
flip or reverse them every blade change and like them a lot..
The blade runs quieter, should last longer from running cooler and the $15
didn't bankrupt me.. *g*
I'll eventually go to ceramic but not for a while..
Mac
https://home.comcast.net/~mac.davis
https://home.comcast.net/~mac.davis/wood_stuff.htm
I replaced the original steel blocks with cool blocks mainly due to the screeching sound the metal
blocks made. It was fingernails on a blackboard type sound to me.
Regards,
Roy
On Thu, 30 Mar 2006 18:01:32 GMT, "Toller" <[email protected]> wrote:
>I have seen cool blocks recommended here many time.
>
>A book I got from the library said that steel blocks are badly unrated.
>Heat is not a problem; the only reason not to use them is that they will not
>support a really small blade properly without risking damage to the teeth.
>Then he recommends maple blocks; they wear out faster than cool blocks, but
>are free.
>
>Also, I have seen a composite block on ebay that claims it is better than
>cool blocks. Anyone tried it?
>
>Comments?
>