On Thu, 24 Aug 2006 14:53:48 GMT, Phisherman <[email protected]> wrote:
>On Wed, 23 Aug 2006 16:39:08 GMT, "srazor" <[email protected]> wrote:
>
>>I am looing to purchase a bandsaw. My choices now are the ridgid BS1400 3/4 hp or the grizzly G0555 at 1 hp the difference in price is about $100 nore for the grizz. Any opinions or expeience with either or both or just general commentary. PS I will be doing some resawing
>>
>>Scot
>
>
>For the 14" bandsaws the "best overall" are Delta, General, Laguna,
>and Powermatic. If I had to decide between the two mentioned the
>Ridgid is the better value. You don't get a fence with the Ridgid,
>but that's probably not a big deal. (Am I the only one that doesn't
>use the bandsaw fence?) For resawing I like Laguna.
I use a fence for pen blanks and some resawing...
I built a fairly "hi-tech" one and trashed it because it was a PITA... I use a
piece of 3/4" x 3" Oak in the miter slot now, with a few different size
"spacers" to change the distance from the fence to the blade... works great..
(Ridgid 14")
Mac
https://home.comcast.net/~mac.davis
https://home.comcast.net/~mac.davis/wood_stuff.htm
On Wed, 23 Aug 2006 16:39:08 GMT, "srazor" <[email protected]> wrote:
>I am looing to purchase a bandsaw. My choices now are the ridgid BS1400 3/4 hp or the grizzly G0555 at 1 hp the difference in price is about $100 nore for the grizz. Any opinions or expeience with either or both or just general commentary. PS I will be doing some resawing
>
>Scot
For the 14" bandsaws the "best overall" are Delta, General, Laguna,
and Powermatic. If I had to decide between the two mentioned the
Ridgid is the better value. You don't get a fence with the Ridgid,
but that's probably not a big deal. (Am I the only one that doesn't
use the bandsaw fence?) For resawing I like Laguna.
"srazor" <[email protected]> wrote in message
news:Mw%[email protected]...
>I am looing to purchase a bandsaw. My choices now are the ridgid BS1400
>3/4 hp or the grizzly G0555 at 1 hp the difference in price is about $100
>nore for the grizz. Any opinions or expeience with either or both or just
>general commentary. PS I will be doing some resawing
>
> Scot
I found the Ridgid with a brand new Woodslicer blade to be underpowered for
resawing hardwood over 3" or so. I upgraded to a 1 HP motor and changed the
pulley sizes to increase the blade speed a bit. Works great now. The
original cast pulleys were crap, and caused immense vibration of the saw.
The center bore of the large pulley was almost 1/16" off center. The blade
wheels are lightweight, and are not at all balanced from the factory. I had
to drill a bunch of shallow holes in the lower wheel to get it close to
balanced.
I have to agree on the G0555 - love it! But buy a decent blade.
Vic
"Tom" <[email protected]> wrote in message
news:[email protected]...
>I have a G0555 with the riser block installed and I love it. Grizz also has
>a resaw fence available for that saw which I will be buying soon.
>
On Wed, 23 Aug 2006 16:39:08 GMT, "srazor" <[email protected]> wrote:
>I am looing to purchase a bandsaw. My choices now are the ridgid BS1400 3/4 hp or the grizzly G0555 at 1 hp the difference in price is about $100 nore for the grizz. Any opinions or expeience with either or both or just general commentary. PS I will be doing some resawing
>
>Scot
I like my ridgid 1400 a lot, but it was a "get it on the HD credit card" thing
and the only BS choice...
A little more hp would be nice but before I paid $100 for an extra 1/4 hp, I'd
look for a used saw and put a 1 1/2 hp motor on it...
That said, I cut bowl blanks up to 9" thick or more and just take my time and
use a sharp blade.... I would probably abuse the saw and blade more if I had
more HP.. *g*
Mac
https://home.comcast.net/~mac.davis
https://home.comcast.net/~mac.davis/wood_stuff.htm