Hi, All,
I going to get a 14" bandsaw finally, prob the Griz, and I'm not
sure what blades to get. I use a Woodworker 2 on the table saw, and
can see the difference between that and something from Harbor
Freight!!! So... First: What brands are good, which ones to stay away
from?
2nd: I see hook, standard, rake teeth. What are they, or where can I
find some descriptions? I will probably look for 3/4 inch something
for resawing, and something smaller for general cutting. I usually
cut oak, fir, cedar, and walnut if that matters.
Well, any help at all, will be a big help in getting started with a
band saw. Thanks, and Happy New Year to all.
Rich.....
[email protected] wrote:
> Hi, All,
>
> I going to get a 14" bandsaw finally, prob the Griz, and I'm not
> sure what blades to get. I use a Woodworker 2 on the table saw, and
> can see the difference between that and something from Harbor
> Freight!!! So... First: What brands are good, which ones to stay away
> from?
>
> 2nd: I see hook, standard, rake teeth. What are they, or where can I
> find some descriptions? I will probably look for 3/4 inch something
> for resawing, and something smaller for general cutting. I usually
> cut oak, fir, cedar, and walnut if that matters.
>
> Well, any help at all, will be a big help in getting started with a
> band saw. Thanks, and Happy New Year to all.
>
> Rich.....
I just got the Griz G0555 and it's a nice machine. The 3/8" relatively
fine tooth blade that came with it is what you call "not aggressive".
I'm saving my pennies to get the riser kit and then will try a
Timberwolf 1/2" 3 tpi from woodcraft, even though they run about $30 per
which is about 3 times the cost of the cheapies. They do make a 3/4" 3
tpi for the 105" blade needed for the riser kit at about the same price.
<[email protected]> wrote in message
news:502b945b-2284-4dbd-8560-3e0fe5f3670b@b41g2000pra.googlegroups.com...
> Hi, All,
>
> I going to get a 14" bandsaw finally, prob the Griz, and I'm not
> sure what blades to get. I use a Woodworker 2 on the table saw, and
> can see the difference between that and something from Harbor
> Freight!!! So... First: What brands are good, which ones to stay away
> from?
>
> 2nd: I see hook, standard, rake teeth. What are they, or where can I
> find some descriptions? I will probably look for 3/4 inch something
> for resawing, and something smaller for general cutting. I usually
> cut oak, fir, cedar, and walnut if that matters.
>
> Well, any help at all, will be a big help in getting started with a
> band saw. Thanks, and Happy New Year to all.
>
> Rich.....
Give Louis Iturra at 888-722-7078. He will talk to you with a level headed
expertise and not try to load you up with anything that doesn't suit your
applications. He also carries a better tension spring (as do Rockler and
Woodcraft) and other improvements and his catalog reads like a hardcover
book - thicker than many! He really helped me out and his blades are very
good. Not that you will need it but he can make custom lengths as well.
Chuck
Turner <[email protected]> writes:
>On Mon, 05 Jan 2009 19:33:26 -0500, B A R R Y
><[email protected]> wrote:
>
>>Turner wrote:
>>>
>>> Should have purchased your Olsen blades from Coastal Tools,
>>> as I had and they're the cheapest I found in Internet.
>>> Wonder if there are anyone cheaper?
>>
>>I can walk in and buy them there! <G>
>>
>>I love Coastal...
>
>You are lucky! Wanna buy cheap Maple lumber at less than
>$1b/f in SFO areas (if they still have any left)?
>
Yes, where?
scott
Turner <[email protected]> writes:
>On 06 Jan 2009 20:27:45 GMT, [email protected] (Scott
>Lurndal) wrote:
>
>>>You are lucky! Wanna buy cheap Maple lumber at less than
>>>$1b/f in SFO areas (if they still have any left)?
>>>
>>
>>Yes, where?
>
>Santa Rosa North of SFO. Your email good? It's not ethical
>for me to post name and phone # here.
try [email protected].
thanks,
scott
On Jan 4, 6:23=A0pm, Turner <[email protected]> wrote:
> On Sun, 4 Jan 2009 09:57:02 -0800 (PST),
>
> [email protected] wrote:
>
> Repost, forget to include Rockler website. :-)
>
> >Thanks to all the ideas. =A0I ended up getting 2 extra Olsen blades from
> >Rockler, 3/8 and 5/8 inch, and the cool blocks. =A0I suspect I will try
> >these and see what they do. =A0Now if only Griz would ship by air at the
> >same rip-off freight price!
>
> >Rich.....
>
> Should have purchased your Olsen blades from Coastal Tools,
> as I had and they're the cheapest I found in Internet.
> Wonder if there are anyone cheaper?
>
> Comparison between Rockler and Coastal Tools
>
> http://www.coastaltool.com/a/accessories/saw/bandsaw_14.html
>
> http://www.rockler.com/product.cfm?page=3D5684&filter=3Dbandsaw%20blade
Yep, just added Coastal to my wood stuff list, I'll give them a try
for the next go-around. Thanks for the heads up!
"Dick Snyder" <[email protected]> writes:
> If I may, I'd like to extend this thread a little. I am going to get a 14"
> Griz sometime in the coming year. I like to buy a good book if I'm buying a
> tool that has many uses. I have one for my table saw and router. Does
> anyone have a book to recommend for the bandsaw.
Iturra's free catalog
Duginski's book.
On Sun, 4 Jan 2009 09:57:02 -0800 (PST),
[email protected] wrote:
>Thanks to all the ideas. I ended up getting 2 extra Olsen blades from
>Rockler, 3/8 and 5/8 inch, and the cool blocks. I suspect I will try
>these and see what they do. Now if only Griz would ship by air at the
>same rip-off freight price!
>
>Rich.....
Should have purchased your Olsen blades from Coastal Tools,
as I had and they're the cheapest I found in Internet.
Wonder if there are anyone cheaper?
Comparison between Rockler and Coastal Tools
http://www.coastaltool.com/a/accessories/saw/bandsaw_14.html
[email protected] wrote:
> Hi, All,
>
> I going to get a 14" bandsaw finally, prob the Griz, and I'm not
> sure what blades to get. I use a Woodworker 2 on the table saw, and
> can see the difference between that and something from Harbor
> Freight!!! So... First: What brands are good, which ones to stay away
> from?
>
> 2nd: I see hook, standard, rake teeth. What are they, or where can I
> find some descriptions? I will probably look for 3/4 inch something
> for resawing, and something smaller for general cutting. I usually
> cut oak, fir, cedar, and walnut if that matters.
>
> Well, any help at all, will be a big help in getting started with a
> band saw. Thanks, and Happy Year to all.
I use plain old $12 Olson's, width excellent results on my 14" Delta w/
riser.
I'd probably not use a 3/4" blade, as most 14" saws won't tension it
properly. I get excellent resaw results with a 3 TPI 1/2". I usually
leave that blade on the saw, as I also use it for rough ripping. I'll
switch to a 1/4" 6TPI or 3/16" 8TPI for curves.
The Olson blades seem to work best with the blades tensioned ~ 1 width
higher on the saw scale, based on the "flutter" test. For example, I
tension a 1/2" blade to the 5/8" mark on the scale.
<[email protected]> wrote in message
news:502b945b-2284-4dbd-8560-3e0fe5f3670b@b41g2000pra.googlegroups.com...
> Hi, All,
>
> I going to get a 14" bandsaw finally, prob the Griz, and I'm not
> sure what blades to get. I use a Woodworker 2 on the table saw, and
> can see the difference between that and something from Harbor
> Freight!!! So... First: What brands are good, which ones to stay away
> from?
>
> 2nd: I see hook, standard, rake teeth. What are they, or where can I
> find some descriptions? I will probably look for 3/4 inch something
> for resawing, and something smaller for general cutting. I usually
> cut oak, fir, cedar, and walnut if that matters.
>
> Well, any help at all, will be a big help in getting started with a
> band saw. Thanks, and Happy New Year to all.
>
> Rich.....
I use BC SAW (Canada) blades. I use 3tpi skip tooth blades for everything.
This is in accordance with Michael Fortune's recommendations. I use
primarily 1/2" blades.
[email protected] wrote:
> Hi, All,
>
> I going to get a 14" bandsaw finally, prob the Griz, and I'm not
> sure what blades to get. I use a Woodworker 2 on the table saw, and
> can see the difference between that and something from Harbor
> Freight!!! So... First: What brands are good, which ones to stay away
> from?
> 2nd: I see hook, standard, rake teeth. What are they, or where can I
> find some descriptions? I will probably look for 3/4 inch something
> for resawing, and something smaller for general cutting. I usually
> cut oak, fir, cedar, and walnut if that matters.
Look here...
http://www.ellissaw.com/Band-Saw-Blades/8/tooth-types-sets
You don't need a 3/4 blade for resawing. See below for a great blade.
____________________
> Well, any help at all, will be a big help in getting started with a
> band saw. Thanks, and Happy New Year to all.
Congrats on your soon-to-be new saw. Bandsaws are wonderful tools, very
handy. They are also a PITA when it comes to changing blades. If I had the
space (and $$) I would have two...one with a 1/2" 3-4 tpi hook tooth blade
for resawing, another with a 3/16" 3-4 tpi skip or hook tooth for curves.
High teeth per inch (10-14) means a smoother (slightly) cut but it also
means a *much* slower cut. I've never had a use for other than those two
blades, YMMV.
This is the best generally available 1/2" resaw blade I know of...
http://www.highlandwoodworking.com/index.asp?PageAction=VIEWPROD&ProdID=1293
--
dadiOH
____________________________
dadiOH's dandies v3.06...
...a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico
Turner wrote:
> On Mon, 05 Jan 2009 19:33:26 -0500, B A R R Y
> <[email protected]> wrote:
>
>> Turner wrote:
>>>
>>> Should have purchased your Olsen blades from Coastal Tools,
>>> as I had and they're the cheapest I found in Internet.
>>> Wonder if there are anyone cheaper?
>> I can walk in and buy them there! <G>
>>
>> I love Coastal...
>
> You are lucky! Wanna buy cheap Maple lumber at less than
> $1b/f in SFO areas (if they still have any left)?
>
If I can walk into Coastal, why would I buy lumber in San Francisco? G>
On Jan 1, 1:40=A0pm, "Dick Snyder" <[email protected]> wrote:
> <[email protected]> wrote in message
>
> news:502b945b-2284-4dbd-8560-3e0fe5f3670b@b41g2000pra.googlegroups.com...
>
>
>
>
>
> > Hi, All,
>
> > =A0 I going to get a 14" bandsaw finally, prob the Griz, and I'm not
> > sure what blades to get. =A0I use a Woodworker 2 on the table saw, and
> > can see the difference between that and something from Harbor
> > Freight!!! =A0So... First: What brands are good, which ones to stay awa=
y
> > from?
>
> > 2nd: I see hook, standard, rake teeth. =A0What are they, or where can I
> > find some descriptions? =A0I will probably look for 3/4 inch something
> > for resawing, and something smaller for general cutting. =A0I usually
> > cut oak, fir, cedar, and walnut if that matters.
>
> > Well, any help at all, will be a big help in getting started with a
> > band saw. =A0Thanks, and Happy New Year to all.
>
> > Rich.....
>
> If I may, I'd like to extend this thread a little. I am going to get a 14=
"
> Griz sometime in the coming year. I like to buy a good book if I'm buying=
a
> tool =A0that has many uses. I have one for my table saw and router. Does
> anyone have a book to recommend for the bandsaw.
>
> Sorry for jumping on your posting Rich but you might benefit too.........=
??- Hide quoted text -
>
> - Show quoted text -
Agree with a good book. Did that for the table saw and a few others.
But I now live in downtown Montana, and those stores with books in the
big cities are no where to be found. Yea Internet!
"Dick Snyder" <[email protected]> wrote in message
news:[email protected]...
>
> <[email protected]> wrote in message
> news:502b945b-2284-4dbd-8560-3e0fe5f3670b@b41g2000pra.googlegroups.com...
>> Hi, All,
>>
>> I going to get a 14" bandsaw finally, prob the Griz, and I'm not
>> sure what blades to get. I use a Woodworker 2 on the table saw, and
>> can see the difference between that and something from Harbor
>> Freight!!! So... First: What brands are good, which ones to stay away
>> from?
>>
>> 2nd: I see hook, standard, rake teeth. What are they, or where can I
>> find some descriptions? I will probably look for 3/4 inch something
>> for resawing, and something smaller for general cutting. I usually
>> cut oak, fir, cedar, and walnut if that matters.
>>
>> Well, any help at all, will be a big help in getting started with a
>> band saw. Thanks, and Happy New Year to all.
>>
>> Rich.....
>
> If I may, I'd like to extend this thread a little. I am going to get a 14"
> Griz sometime in the coming year. I like to buy a good book if I'm buying
> a tool that has many uses. I have one for my table saw and router. Does
> anyone have a book to recommend for the bandsaw.
>
> Sorry for jumping on your posting Rich but you might benefit
> too.........??
>
Mastering Your Bandsaw
Mark Duginske
Video, or book
I have his video I highly recommend it. Check out Tauton books
On 06 Jan 2009 20:27:45 GMT, [email protected] (Scott
Lurndal) wrote:
>>You are lucky! Wanna buy cheap Maple lumber at less than
>>$1b/f in SFO areas (if they still have any left)?
>>
>
>Yes, where?
Santa Rosa North of SFO. Your email good? It's not ethical
for me to post name and phone # here.
>
>scott
Hello Rich,
One thing I have read in a variety of places is that you should not go
over 1/2 inch for a 14 inch bandsaw. Your saw may not produce enough
spring pressure to properly tension the blade. Although I have used
3/4 inch successfully on my 14, I prefer - and get similar results
with 1/2 inch. I did replace the stock spring with a heavier style.
I have no comments on what to avoid but I use Morse and Olsen
interchangeably. I have used Carter too, but I end up buying the two
other brands more.
If you plan to use your saw for scrolling I highly recommend the
Carter Stabilizer. Used with a 1/8 or 3/16 blade it can deliver
scroll saw type curves with bandsaw type speed.
Call Louis Iturra at Iturra designs for one of his catalogues. He
sells a lot of blades and accessories for the 14 (he focusses on the
Delta but so many 14s are copies of that machine. Here is his number
1-866-883-8064
Thanks for the New Year wishes and same to you. Hope you have lots of
fun with that bandsaw.
Marc
On Wed, 31 Dec 2008 18:29:27 -0800 (PST), [email protected] wrote:
>Hi, All,
>
> I going to get a 14" bandsaw finally, prob the Griz, and I'm not
>sure what blades to get. I use a Woodworker 2 on the table saw, and
>can see the difference between that and something from Harbor
>Freight!!! So... First: What brands are good, which ones to stay away
>from?
>
>2nd: I see hook, standard, rake teeth. What are they, or where can I
>find some descriptions? I will probably look for 3/4 inch something
>for resawing, and something smaller for general cutting. I usually
>cut oak, fir, cedar, and walnut if that matters.
>
>Well, any help at all, will be a big help in getting started with a
>band saw. Thanks, and Happy New Year to all.
>
>Rich.....
My preference is a 3/8" blade... Ok for what little resawing I do and good for
curves..
I've tried most name brand blades and can't see any difference between them and
the ones that I have made at the local saw shop..
I might just have a saw shop that stocks good quality blade rolls and such..
I have the Ridgid (same as Griz) with the Griz riser kit, using 105" blades.
I pay about $12 each, in lots of 5..
mac
Please remove splinters before emailing
Turner wrote:
> On Sun, 4 Jan 2009 09:57:02 -0800 (PST),
> [email protected] wrote:
>
> Repost, forget to include Rockler website. :-)
>
>> Thanks to all the ideas. I ended up getting 2 extra Olsen blades from
>> Rockler, 3/8 and 5/8 inch, and the cool blocks. I suspect I will try
>> these and see what they do. Now if only Griz would ship by air at the
>> same rip-off freight price!
>>
>> Rich.....
>
> Should have purchased your Olsen blades from Coastal Tools,
> as I had and they're the cheapest I found in Internet.
> Wonder if there are anyone cheaper?
>
> Comparison between Rockler and Coastal Tools
>
> http://www.coastaltool.com/a/accessories/saw/bandsaw_14.html
>
> http://www.rockler.com/product.cfm?page=5684&filter=bandsaw%20blade
Neither of them carry the blade I like, which is a 3/16 x 4 hook, skip
tooth blade like this one: (never bought anything from this place, just
a reference)
http://www.cherrytreetoys.com/Band_Saw_82_inch_x_3_16_x_4_sk_P1722.cfm?UserID=1199
I cut everything with a blade like that, I even resaw (6") with it. I
always bought my blades from a company a mile from my house. They sold
industrial blades to industry, but would make up blades for anyone that
walked in I guess, at least they did for me. Occasionally I would get a
blade that would break quickly, but 99% of them were surprising in there
durability. This type of blade cuts fast and furious, can cut small
radius and is all I need. Once I stumbled over this blade
configuration, I never changed for another blade. I originally bought
it to cut out names in 2x's for people. I wanted something that cut
small radius. I liked it better than all my other blades for general
use. Cuts a little rough but it is a band saw after all...
--
Jack
Using FREE News Server: http://Motzarella.org
http://jbstein.com
On Sun, 4 Jan 2009 09:57:02 -0800 (PST),
[email protected] wrote:
Repost, forget to include Rockler website. :-)
>Thanks to all the ideas. I ended up getting 2 extra Olsen blades from
>Rockler, 3/8 and 5/8 inch, and the cool blocks. I suspect I will try
>these and see what they do. Now if only Griz would ship by air at the
>same rip-off freight price!
>
>Rich.....
Should have purchased your Olsen blades from Coastal Tools,
as I had and they're the cheapest I found in Internet.
Wonder if there are anyone cheaper?
Comparison between Rockler and Coastal Tools
http://www.coastaltool.com/a/accessories/saw/bandsaw_14.html
http://www.rockler.com/product.cfm?page=5684&filter=bandsaw%20blade
[email protected] wrote:
> Hi, All,
>
> I going to get a 14" bandsaw finally, prob the Griz, and I'm not
> sure what blades to get. I use a Woodworker 2 on the table saw, and
> can see the difference between that and something from Harbor
> Freight!!! So... First: What brands are good, which ones to stay away
> from?
>
> 2nd: I see hook, standard, rake teeth. What are they, or where can I
> find some descriptions? I will probably look for 3/4 inch something
> for resawing, and something smaller for general cutting. I usually
> cut oak, fir, cedar, and walnut if that matters.
>
> Well, any help at all, will be a big help in getting started with a
> band saw. Thanks, and Happy New Year to all.
>
> Rich.....
I agree with dadiOH - Highland Hardware's WoodSlicer is the best blade
I've ever used, and I just wish they made them in sizes smaller than
1/2". If your Grizzly will accommodate a 1/2" blade, but all means get
a WoodSlicer; it's the Forrest Woodworker of bandsaw blades (well, as
close as you're going to get, unless you move up to a big daddy saw with
a carbide blade).
Woodworker's Supply is now carrying Bahco/Starrett blades (two of my
favorite brand names) at reasonable prices. Just today I received my
first batch of these blades (two 1/4" and one 3/8") for my MiniMax and
I'm anxious to put them to the test. The 1/4" blade sliced through some
scrap Pecan like buttah, and I used it to cut some router templates with
plenty of tight curves and was quite pleased with the results. Now if
they just don't break before they lose their edge I'll be happy. Most
of the other 1/4" blades I've used have been either Timberwolf or Olson
and they've all broken before they had a chance to get dull. Of course,
with the MiniMax it's very easy to over-tension a blade, so I could just
be expecting too much of my poor little 1/4" blades... :-)
--
See Nad. See Nad go. Go Nad!
To reply, eat the taco.
http://www.flickr.com/photos/bbqboyee/
On Wed, 31 Dec 2008 18:29:27 -0800 (PST), [email protected] wrote:
>Hi, All,
>
> I going to get a 14" bandsaw finally, prob the Griz, and I'm not
>sure what blades to get. I use a Woodworker 2 on the table saw, and
>can see the difference between that and something from Harbor
>Freight!!! So... First: What brands are good, which ones to stay away
>from?
>
>2nd: I see hook, standard, rake teeth. What are they, or where can I
>find some descriptions? I will probably look for 3/4 inch something
>for resawing, and something smaller for general cutting. I usually
>cut oak, fir, cedar, and walnut if that matters.
>
>Well, any help at all, will be a big help in getting started with a
>band saw. Thanks, and Happy New Year to all.
>
>Rich.....
First do yourself a favor and get Mark Duginski's book on bandsaws. A
well-tuned bandsaw is an absolute joy to use and Mark goes over the
steps involved. These steps should be done often and don't take a lot
of time. I have always used Delta-brand blades on my Delta bandsaw
because that's what's available locally, maybe not the best brand, but
not the worst either. If you want the best possible cut, take the
time to use the appropriate blade for the work at hand. I am
surprised how many woodworkers never change their blades.
On Mon, 05 Jan 2009 19:33:26 -0500, B A R R Y
<[email protected]> wrote:
>Turner wrote:
>>
>> Should have purchased your Olsen blades from Coastal Tools,
>> as I had and they're the cheapest I found in Internet.
>> Wonder if there are anyone cheaper?
>
>I can walk in and buy them there! <G>
>
>I love Coastal...
You are lucky! Wanna buy cheap Maple lumber at less than
$1b/f in SFO areas (if they still have any left)?
<[email protected]> wrote in message
news:502b945b-2284-4dbd-8560-3e0fe5f3670b@b41g2000pra.googlegroups.com...
> Hi, All,
>
> I going to get a 14" bandsaw finally, prob the Griz, and I'm not
> sure what blades to get. I use a Woodworker 2 on the table saw, and
> can see the difference between that and something from Harbor
> Freight!!! So... First: What brands are good, which ones to stay away
> from?
>
> 2nd: I see hook, standard, rake teeth. What are they, or where can I
> find some descriptions? I will probably look for 3/4 inch something
> for resawing, and something smaller for general cutting. I usually
> cut oak, fir, cedar, and walnut if that matters.
>
> Well, any help at all, will be a big help in getting started with a
> band saw. Thanks, and Happy New Year to all.
>
> Rich.....
If I may, I'd like to extend this thread a little. I am going to get a 14"
Griz sometime in the coming year. I like to buy a good book if I'm buying a
tool that has many uses. I have one for my table saw and router. Does
anyone have a book to recommend for the bandsaw.
Sorry for jumping on your posting Rich but you might benefit too.........??