I'm in the market for a half decent quality 10" table saw. I need at
least a 20" rip capability. I'm just a garage hobbiest and it will
receive minimal use but I do appreciate quality and hate to buy junk but
if it can do a decent job, I'm happy.
Could someone in the know look at these 2 saws and give your opinion.
http://www.deltawoodworking.com/index.asp?e=136&p=794
http://www3.sears.ca/webapp/wcs/stores/servlet/ProductDisplay?categoryId=10102&catalogId=10001&storeId=10001&langId=-1&rrc=1&productId=157837664&pe=11
I'm looking for a reasonable middle ground between 'decent' quality and
cost. 250.00 USD is really my limit.
Any and all opinions appreciated.
Thanks for reading.
Sean.
On Wed, 08 Sep 2004 06:34:30 GMT, patriarch
<<patriarch>[email protected]> wrote:
>
>I belong to this really interesting woodworking group
>(www.diablowoodworkers.com) In that group of generally very nice people
>are all sorts of folks, quite experienced in the ways of tools, new and
>old, willing to help a new user in evaluating and purchasing tools. Quite
>frequently, there will be an email broadcast to the group, that some one
>has a used blurfl for sale, with pictures, at such and such a price.
>Usually because of an upgrade. Buying a piece of used equipment, from
>someone you know, whose work you've seen, and with whom you've spent some
>quality time, is a whole different experience.
>
>But if it came to going out to see something from the paper, I could call
>on at least half a dozen folks, and find at least one who would gladly go
>check out the new/used toys.
>
>Woodworkers love to spend other peoples' money too.
>
>Patriarch
Exactly. Lacking such a resource -- which is "invaluable", in a valuable
sort of way (I don't want to start a flammable/inflammable debate again) --
I buy new.
"SDogg" <[email protected]> wrote in message
news:F48%[email protected]...
> I'm in the market for a half decent quality 10" table saw. I need at
> least a 20" rip capability. I'm just a garage hobbiest and it will
> receive minimal use but I do appreciate quality and hate to buy junk but
> if it can do a decent job, I'm happy.
>
> Could someone in the know look at these 2 saws and give your opinion.
>
> http://www.deltawoodworking.com/index.asp?e=136&p=794
>
>
http://www3.sears.ca/webapp/wcs/stores/servlet/ProductDisplay?categoryId=10102&catalogId=10001&storeId=10001&langId=-1&rrc=1&productId=157837664&pe=11
>
>
> I'm looking for a reasonable middle ground between 'decent' quality and
> cost. 250.00 USD is really my limit.
>
> Any and all opinions appreciated.
>
If that's all you can afford, go for it and make the best of it. But you
can't get a decent quality saw for $250 unless you find a widow who hasn't
heard of ebay. How did you come up with the $250 figure? Sometimes I set
some arbitrary budget number before I do all of my research, and it turns
out to be off-base. If it is an optional purchase, waiting until you can
comfortably expend more money for decent equipment might be worth
considering.
In article <F48%[email protected]>,
SDogg <[email protected]> wrote:
>I'm in the market for a half decent quality 10" table saw. I need at
>least a 20" rip capability. I'm just a garage hobbiest and it will
>receive minimal use but I do appreciate quality and hate to buy junk but
>if it can do a decent job, I'm happy.
>
>Could someone in the know look at these 2 saws and give your opinion.
>
>http://www.deltawoodworking.com/index.asp?e=136&p=794
>
>http://www3.sears.ca/webapp/wcs/stores/servlet/ProductDisplay?categoryId=10102&catalogId=10001&storeId=10001&langId=-1&rrc=1&productId=157837664&pe=11
>
>
>I'm looking for a reasonable middle ground between 'decent' quality and
>cost. 250.00 USD is really my limit.
For 20" ripping, you really should have something bigger than a 'benchtop'
type saw. (_those_ you can get as inexpensively as circa US$90, and worth
about what you pay for 'em :)
Until the new models that came out this summer, Craftsman's saws have *not*
been worth serious consideration for a long time, for anything approaching
quality work. If you happen to find a used Craftsman; from Korean-war vintage
through about 1973 construction, that's a different story.
The Delta you're looking at has a bunch of drawbacks/limitations, too.
First off, it will be _gawdawful_ noisy. Because it's a 'universal moter',
and a form of 'direct drive'.
'Decent quailty' 10" saws _start_ at about US$500, new. and go up (_way_ up!)
from there. "Good" contractor saws tend to list in the US$800 and up range.
There is =one= notable exception to the above -- and which _is_ worth serious
consideration -- the Ryobi BT-3100. It lists for just under US$300, however.
It is a *MUCH* better saw than the stuff costing not much less. Hell, it's
a better saw than a lot of the saws costing a couple of hundred dollars _more_!
Depending on your knowledge of tools and machinery, you could also consider
looking into the used equipment market.
Depending on where you're located, decent older stuff may be available, at
a reasonable price, on a fairly regular basis. The good deals do tend to
sell quickly, so you have to co-ordinate your searching with when the for-sale
ads come out. *and* you have to know what you're looking for/at. Expcect a
fair amount of clean-up, 'tuning', etc., on any bargain older saw. Not
necessarily 'tear down and rebuild', but definitely 'de gunk', 'oil and lube',
and tune-up/alignment. You should figure on a new blade, too. If the one
that comes with it (if any) is 'usable', consider that a 'plus'.
On Tue, 07 Sep 2004 23:47:17 +0800, Old Nick <[email protected]>
wrote:
>On Tue, 07 Sep 2004 04:19:26 GMT, "toller" <[email protected]> vaguely
>proposed a theory
>>
>>You have to watch the classified ads pretty closely.
>
>and be able to judge a good purchase from a goose purchase....how?
Aha! That is why I won't buy used. I will buy many things used, but I do
not know enough about ww tools. Too many variables that I add to the
equation with my "technique" for me to increase the chances of a tool issue
causing problems. After all, consider all the posts here about problems
with NEW tools - even expensive ones form the "top" companies. I post this
comment not just for the OP but also for those of you who regularly -- and
with the best of intentions -- suggest newbies purchase used tools. Hand
power tools, yes. Maybe some bench tools. But among the power tools I
would not buy used at this point in the learning curve: TS, jointer,
planer, and probably a BS. FWIW. -- Igor
ATP wrote:
> If that's all you can afford, go for it and make the best of it. But you
> can't get a decent quality saw for $250 unless you find a widow who hasn't
> heard of ebay.
I absolutely agree. I have to say every time I've bought a cheap tool I've
ended up regretting it every time I used it. It is absolutely amazing how much
more capable quality tools are.
In this fellow's case, I'd definitely say look for used. Classified ads,
for-sale newsgroups, bulletin boards at the grocery store... I've seen a lot of
decent big tools for sale lately in the North Carolina area; I couldn't say for
anywhere else. Unfortunately, I haven't seen a lathe or bandsaw lately (which
is all I "need" at this point).
--
Mortimer Schnerd, RN
[email protected]
http://www.mortimerschnerd.com
I agree with previous posts - you need to look for used equipment. I am not
as gloomy as some, however. If you live in or near a fairly large city you
should be able to find one with a little patience and persistence. I live
near Wichita, Ks (about 400 to 500,000 local population). Between the
newspaper and PennyPower used Deltas show up fairly regularly in the $250 to
$300 range. Lots of Craftsman saws too but I would stick with Delta or
Grizzly if possible.
Even if you don't live in a larger town, check out classifieds via newspaper
web sites in towns that are close enough.
"Mortimer Schnerd, RN" <[email protected]> wrote in message
news:HLh%[email protected]...
> ATP wrote:
> > If that's all you can afford, go for it and make the best of it. But you
> > can't get a decent quality saw for $250 unless you find a widow who
hasn't
> > heard of ebay.
>
>
> I absolutely agree. I have to say every time I've bought a cheap tool
I've
> ended up regretting it every time I used it. It is absolutely amazing how
much
> more capable quality tools are.
>
> In this fellow's case, I'd definitely say look for used. Classified ads,
> for-sale newsgroups, bulletin boards at the grocery store... I've seen a
lot of
> decent big tools for sale lately in the North Carolina area; I couldn't
say for
> anywhere else. Unfortunately, I haven't seen a lathe or bandsaw lately
(which
> is all I "need" at this point).
>
>
I was able to find a unisaw in excellent condition for $400, on ebay from a
local seller. Three phase but I have plenty of VFD's already.
igor <[email protected]> wrote in
news:[email protected]:
> On Tue, 07 Sep 2004 23:47:17 +0800, Old Nick <[email protected]>
> wrote:
>
>>On Tue, 07 Sep 2004 04:19:26 GMT, "toller" <[email protected]> vaguely
>>proposed a theory
>
>>>
>>>You have to watch the classified ads pretty closely.
>>
>>and be able to judge a good purchase from a goose purchase....how?
>
> Aha! That is why I won't buy used. I will buy many things used, but
> I do not know enough about ww tools. Too many variables that I add to
> the equation with my "technique" for me to increase the chances of a
> tool issue causing problems. After all, consider all the posts here
> about problems with NEW tools - even expensive ones form the "top"
> companies. I post this comment not just for the OP but also for those
> of you who regularly -- and with the best of intentions -- suggest
> newbies purchase used tools. Hand power tools, yes. Maybe some bench
> tools. But among the power tools I would not buy used at this point
> in the learning curve: TS, jointer, planer, and probably a BS. FWIW.
> -- Igor
>
I belong to this really interesting woodworking group
(www.diablowoodworkers.com) In that group of generally very nice people
are all sorts of folks, quite experienced in the ways of tools, new and
old, willing to help a new user in evaluating and purchasing tools. Quite
frequently, there will be an email broadcast to the group, that some one
has a used blurfl for sale, with pictures, at such and such a price.
Usually because of an upgrade. Buying a piece of used equipment, from
someone you know, whose work you've seen, and with whom you've spent some
quality time, is a whole different experience.
But if it came to going out to see something from the paper, I could call
on at least half a dozen folks, and find at least one who would gladly go
check out the new/used toys.
Woodworkers love to spend other peoples' money too.
Patriarch
SDogg <[email protected]> wrote in message news:<F48%[email protected]>...
>snip<
>
> I'm looking for a reasonable middle ground between 'decent' quality and
> cost. 250.00 USD is really my limit.
>
> Any and all opinions appreciated.
>
> Thanks for reading.
>
> Sean.
As a long-time purchaser of used equipment, I can say that the money
I've saved over buying new has more than paid for the modest time and
effort needed to clean/recondition/repair/rebuild the used. I have
yet to make a terrible purchase--one that required even half the
several hunnert I saved per tool--and I now have a shop of decent
quality older iron which perform to the degree of precision I need.
More than that, in reconditioning I get an intimate look at the
machine I'll be using, a machine with which I am literally putting
life and limb at risk. The education is invaluable.
Some hand tools can be used as they come out-of-the-box, but most (new
or used) machine tools require more effort (setup/tuneup). From my
experience, and most of what I've read on the wreck and elsewhere, the
setup and tuneup on new and used equipment is about the same--if you
are careful when buying.
John White's book from Taunton Press, "Care and Repair of Shop
Machines" is a good reference. I recommend it, even if you purchase
new. Good luck.
Dan
On Mon, 06 Sep 2004 22:23:48 -0300, SDogg <[email protected]>
vaguely proposed a theory
......and in reply I say!:
remove ns from my header address to reply via email
poor table saws are poor saws. do you really need a TABLE SAW?
>I'm in the market for a half decent quality 10" table saw. I need at
>least a 20" rip capability. I'm just a garage hobbiest and it will
>receive minimal use but I do appreciate quality and hate to buy junk but
>if it can do a decent job, I'm happy.
>
>Could someone in the know look at these 2 saws and give your opinion.
>
>http://www.deltawoodworking.com/index.asp?e=136&p=794
>
>http://www3.sears.ca/webapp/wcs/stores/servlet/ProductDisplay?categoryId=10102&catalogId=10001&storeId=10001&langId=-1&rrc=1&productId=157837664&pe=11
>
>
>I'm looking for a reasonable middle ground between 'decent' quality and
>cost. 250.00 USD is really my limit.
>
>Any and all opinions appreciated.
>
>Thanks for reading.
>
>Sean.
*****************************************************
I know I am wrong about just about everything. So I
am not going to listen when I am told I am wrong about
the things I know I am right about.
On Tue, 07 Sep 2004 04:19:26 GMT, "toller" <[email protected]> vaguely
proposed a theory
......and in reply I say!:
remove ns from my header address to reply via email
>Perfectly good contractors saws regularly sell used for about $250 (about
>$500 new). Assuming you get a sound one, you will be much happier with it
>than with something like your links.
>
>You have to watch the classified ads pretty closely.
and be able to judge a good purchase from a goose purchase....how?
*****************************************************
I know I am wrong about just about everything. So I
am not going to listen when I am told I am wrong about
the things I know I am right about.
Perfectly good contractors saws regularly sell used for about $250 (about
$500 new). Assuming you get a sound one, you will be much happier with it
than with something like your links.
You have to watch the classified ads pretty closely. Around here anything
decent is gone the first day; it took me a few months before I called on one
that wasn't already sold; but I am delighted with what I got.
Put some feelers out for used equipment. There can be some good deals
out there, you might find an idiot like me that spent 1/2 what a
cabinet saw cost trying to turn an old craftsman cast iron top saw
into a great saw. I sold an old craftsmen cast iron saw with a
systimatic blade, new true 1 1/2 hp motor, link belts and machined
pulleys, pals, vega 50"" fence, with a rockler router table dropped in
for $300. Some lessons hurt, but I got a great payback on a used
unisaw from RWM.
MikeM
On Mon, 06 Sep 2004 22:23:48 -0300, SDogg <[email protected]> wrote:
>I'm in the market for a half decent quality 10" table saw. I need at
>least a 20" rip capability. I'm just a garage hobbiest and it will
>receive minimal use but I do appreciate quality and hate to buy junk but
>if it can do a decent job, I'm happy.
>
>Could someone in the know look at these 2 saws and give your opinion.
>
>http://www.deltawoodworking.com/index.asp?e=136&p=794
>
>http://www3.sears.ca/webapp/wcs/stores/servlet/ProductDisplay?categoryId=10102&catalogId=10001&storeId=10001&langId=-1&rrc=1&productId=157837664&pe=11
>
>
>I'm looking for a reasonable middle ground between 'decent' quality and
>cost. 250.00 USD is really my limit.
>
>Any and all opinions appreciated.
>
>Thanks for reading.
>
>Sean.
"SDogg" <[email protected]> wrote in message
>
> Could someone in the know look at these 2 saws and give your opinion.
>
> http://www.deltawoodworking.com/index.asp?e=136&p=794
>
> http://www3.sears.ca/webapp/wcs/stores/servlet/ProductDisplay?categoryId=10102&catalogId=10001&storeId=10001&langId=-1&rrc=1&productId=157837664&pe=11
>
>
> I'm looking for a reasonable middle ground between 'decent' quality and
> cost. 250.00 USD is really my limit.
If that is your limit, either saw will do. they are not the best, but the
price is right. I had a Craftsman and gave it away when I bought my Delta
Contractor's saw (that was $800 though)
You have to start someplace. While it is short on performance compared to
my present saw, I was able to make a lot of nice things with it. Setup takes
more time, crosscutting width is limited, etc. If you are making bookcases,
pine shelves, and the like, it will do the job. Do invest in a good blade
though. Something like a Freud Diablo will be a big step up.