Thanks Bob,
Please feel free to edit this article as you see fit. Especially if
you can find a reference, that would be helpful. I wrote in a
one-liner at the bottom of the history section to show that the (tm)
was meant to be funny, not really trademarked.
Anyone else involved in wikipedia woodworking here? If not, get
cracking. It's easy and it really needs some help. Just pick an
article and start writing.
James
Thanks Bob,
Please feel free to edit this article as you see fit. Especially if
you can find a reference, that would be helpful. I wrote in a
one-liner at the bottom of the history section to show that the (tm)
was meant to be funny, not really trademarked.
Anyone else involved in wikipedia woodworking here? If not, get
cracking. It's easy and it really needs some help. Just pick an
article and start writing.
James
I just took a peek and saw the first myth..... There is no trademark for
Scary Sharp - never was. As I recall reading, someone tagged that TM on the
end as a joke. If I can find the reference for that statement, I'll post it
here.
Bob S.
<[email protected]> wrote in message
news:[email protected]...
> Group, if you have not noticed, wikipedia needs help in the woodworking
> department. I have started an article on Scary Sharp (tm) here:
>
> http://en.wikipedia.org/wiki/Scary_sharp
>
> Please help me out by editing it, or suggesting changes.
>
> Thanks,
> James
>
On 11 Nov 2005 15:05:30 -0800, with neither quill nor qualm,
[email protected] quickly quoth:
>Thanks Bob,
>Please feel free to edit this article as you see fit. Especially if
James, please change the article from "Flatten the back of the chisel
by starting with the coarsest grit of sandpaper." to "the coarsest
grit _necessary_". If the iron is flat but not polished, that could be
as fine as 300 grit.
==============================================================
Like peace and quiet? Buy a phoneless cord.
http://www/diversify.com/stees.html Hilarious T-shirts online
==============================================================
Larry Jaques wrote:
> On 11 Nov 2005 15:05:30 -0800, with neither quill nor qualm,
> [email protected] quickly quoth:
>
>
>>Thanks Bob,
>>Please feel free to edit this article as you see fit. Especially if
>
>
> James, please change the article from "Flatten the back of the chisel
> by starting with the coarsest grit of sandpaper." to "the coarsest
> grit _necessary_". If the iron is flat but not polished, that could be
> as fine as 300 grit.
>
>
> ==============================================================
> Like peace and quiet? Buy a phoneless cord.
> http://www/diversify.com/stees.html Hilarious T-shirts online
> ==============================================================
if it's from Veritas, you can safely start at around 600. :)
Dave
On 11 Nov 2005 13:58:15 -0800, [email protected] scribbled:
>Group, if you have not noticed, wikipedia needs help in the woodworking
>department. I have started an article on Scary Sharp (tm) here:
>
>http://en.wikipedia.org/wiki/Scary_sharp
>
>Please help me out by editing it, or suggesting changes.
Hi James,
Get yourself a handle and come and join us at the Woodworking
WikiProject.
Luigi
Replace "nonet" with "yukonomics" for real email address
www.yukonomics.ca/wooddorking/humour.html
www.yukonomics.ca/wooddorking/antifaq.html
http://en.wikipedia.org/wiki/Wikipedia:WikiProject_Woodworking