I've been looking for a cordles drill for some time. In addition to
the convenience of cordless for general household maintenance work,
I'd also like for it to be able to deal with woodworking chores re:
drilling up to 2x wood, screws for the same. Purely non-pro use
(i.e. light to periodic moderate use), but I'd like something more
than just a lightweight utility drill. Saying that, I'm seeing more
and more of "brand name" drill models of the 12V-14V size being
offered at extremely good prices. One such (Makita 6280D: 14.4V,
1.3Ahr, about 300-odd ft/lbs torque) has caught my eye in a local sale
flyer. Price is nice ($125 Cdn) but I know next to nothing about this
particular model/build series. Any user comments? Any comments in
general about the minimum I should be looking at? I have no other
cordless equipment here. For the most part, PC and Bosch corded
tools. But the convenience factor of the drill has finally nudged me
along enough to consider purchasing one.
thanks
--
Monroe
I've got both 9.6V and 14.4V Makita cordless drills and I like them both,
for just the same kind of uses that you describe. My wife likes the 9.6
better because it's a little smaller and lighter, but it's still got enough
power and endurance for household use, and I pick it up myself instead of
the 14 when I've got something light to do. Both of them have good balance.
The 14.4 that I have came with NIMH batteries (black cases), which are
significantly better than the Nicad ones (red cases). If the one you're
looking at has the NIMH batteries, that'd be a plus, but either way I think
you'd like the drill.
Tom Dacon
'
"Monroe" <[email protected]> wrote in message
news:[email protected]...
> I've been looking for a cordles drill for some time. In addition to
> the convenience of cordless for general household maintenance work,
> I'd also like for it to be able to deal with woodworking chores re:
> drilling up to 2x wood, screws for the same. Purely non-pro use
> (i.e. light to periodic moderate use), but I'd like something more
> than just a lightweight utility drill. Saying that, I'm seeing more
> and more of "brand name" drill models of the 12V-14V size being
> offered at extremely good prices. One such (Makita 6280D: 14.4V,
> 1.3Ahr, about 300-odd ft/lbs torque) has caught my eye in a local sale
> flyer. Price is nice ($125 Cdn) but I know next to nothing about this
> particular model/build series. Any user comments? Any comments in
> general about the minimum I should be looking at? I have no other
> cordless equipment here. For the most part, PC and Bosch corded
> tools. But the convenience factor of the drill has finally nudged me
> along enough to consider purchasing one.
>
> thanks
> --
>
> Monroe
I agree with Tom. NiMH batteries are usually nicer except that NiCad might
run a little better in very cold weather. I have the 18v Makita and it has
been great. I was able to drive a 1 1/4 auger bit through 2x4 studs in 40
degree weather last fall and the battery life was still pretty good. Makita
is one of the few manufacturers making NiMH batteries so I usually look
there first for my cordless tools.
-Steve
"Tom Dacon" <[email protected]> wrote in message
news:[email protected]...
> I've got both 9.6V and 14.4V Makita cordless drills and I like them both,
> for just the same kind of uses that you describe. My wife likes the 9.6
> better because it's a little smaller and lighter, but it's still got
> enough power and endurance for household use, and I pick it up myself
> instead of the 14 when I've got something light to do. Both of them have
> good balance. The 14.4 that I have came with NIMH batteries (black cases),
> which are significantly better than the Nicad ones (red cases). If the one
> you're looking at has the NIMH batteries, that'd be a plus, but either way
> I think you'd like the drill.
>
> Tom Dacon
> '
> "Monroe" <[email protected]> wrote in message
> news:[email protected]...
>> I've been looking for a cordles drill for some time. In addition to
>> the convenience of cordless for general household maintenance work,
>> I'd also like for it to be able to deal with woodworking chores re:
>> drilling up to 2x wood, screws for the same. Purely non-pro use
>> (i.e. light to periodic moderate use), but I'd like something more
>> than just a lightweight utility drill. Saying that, I'm seeing more
>> and more of "brand name" drill models of the 12V-14V size being
>> offered at extremely good prices. One such (Makita 6280D: 14.4V,
>> 1.3Ahr, about 300-odd ft/lbs torque) has caught my eye in a local sale
>> flyer. Price is nice ($125 Cdn) but I know next to nothing about this
>> particular model/build series. Any user comments? Any comments in
>> general about the minimum I should be looking at? I have no other
>> cordless equipment here. For the most part, PC and Bosch corded
>> tools. But the convenience factor of the drill has finally nudged me
>> along enough to consider purchasing one.
>>
>> thanks
>> --
>>
>> Monroe
>
>
"Leon" <[email protected]> wrote in message
news:[email protected]...
>
> "Steve W" <[email protected]> wrote in message
> news:[email protected]...
>>I agree with Tom. NiMH batteries are usually nicer except that NiCad
>>might run a little better in very cold weather. I have the 18v Makita and
>>it has been great. I was able to drive a 1 1/4 auger bit through 2x4
>>studs in 40 degree weather last fall and the battery life was still pretty
>>good. Makita is one of the few manufacturers making NiMH batteries so I
>>usually look there first for my cordless tools.
>
>
> Better buy quick as many including Makita are switching to Lithium Ion
> batteries.
>
Even better.
-Steve
"Monroe" wrote in message
> I've been looking for a cordles drill for some time.
I don't think you can go wrong with a Makita cordless. I have had a number
of them down through the years and have always been happy. Although I am
currently using a DeWalt 18v, I wouldn't hesitate to buy Makita again.
--
www.e-woodshop.net
Last update: 5/6/06
"Monroe" <[email protected]> wrote in message
news:[email protected]...
Snip
One such (Makita 6280D: 14.4V,
> 1.3Ahr, about 300-odd ft/lbs torque) has caught my eye in a local sale
> flyer. Price is nice ($125 Cdn) but I know next to nothing about this
> particular model/build series. Any user comments? Any comments in
> general about the minimum I should be looking at? I have no other
> cordless equipment here. For the most part, PC and Bosch corded
> tools. But the convenience factor of the drill has finally nudged me
> along enough to consider purchasing one.
I would be a bit leery of the 1.3 Ahr battery. I would look for something
in at least the 2.0 range.
Otherwise I have owned 1 Panasonic, 2 DeWalt, and 2 Makita and have liked
them all. In particular the Panasonic was very nice. The Makita is a good
drill equipped with the 2.6 battery.
"Steve W" <[email protected]> wrote in message
news:[email protected]...
>I agree with Tom. NiMH batteries are usually nicer except that NiCad might
>run a little better in very cold weather. I have the 18v Makita and it has
>been great. I was able to drive a 1 1/4 auger bit through 2x4 studs in 40
>degree weather last fall and the battery life was still pretty good.
>Makita is one of the few manufacturers making NiMH batteries so I usually
>look there first for my cordless tools.
Better buy quick as many including Makita are switching to Lithium Ion
batteries.
"Monroe" <[email protected]> wrote in message
news:[email protected]...
> I've been looking for a cordles drill for some time. In addition to
> the convenience of cordless for general household maintenance work,
> I'd also like for it to be able to deal with woodworking chores re:
> drilling up to 2x wood, screws for the same. Purely non-pro use
> (i.e. light to periodic moderate use), but I'd like something more
> than just a lightweight utility drill. Saying that, I'm seeing more
> and more of "brand name" drill models of the 12V-14V size being
> offered at extremely good prices. One such (Makita 6280D: 14.4V,
> 1.3Ahr, about 300-odd ft/lbs torque) has caught my eye in a local sale
> flyer. Price is nice ($125 Cdn) but I know next to nothing about this
> particular model/build series. Any user comments? Any comments in
> general about the minimum I should be looking at? I have no other
> cordless equipment here. For the most part, PC and Bosch corded
> tools. But the convenience factor of the drill has finally nudged me
> along enough to consider purchasing one.
>
> thanks
> --
>
> Monroe
I bought this package:
http://www.amazon.com/gp/product/B000ASE2YM/qid=1148316506/sr=8-3/ref=pd_bbs_3/102-2737701-3757736?%5Fencoding=UTF8&v=glance&n=228013
I use the drill and driver for around the house and some woodworking but not
on a daily basis. I thought this was a pretty good deal considering you
get both a drill and an impact driver. I did find it cheaper elsewhere.
I find the batteries charge up faster than I can use them up (the package
comes with 2) so it's perfect for me. I'd love to have the latest and
greatest but just couldn't justify the extra expense of the Lithium Ion
stuff given my limited use of it.
Cheers,
cc