Tool Cart. In their "fat" sale catalog that came out at the beginning
of this month, the very first coupon on the first page is for the
following unit for $99.99. I never thought I'd own one of these, but
for this price I'll bite (actually, it was not a hard decision after
seeing it in person). It weighs a full 100 pounds, so that comes out to
a buck a pound.
http://www.harborfreight.com/tool-storage/tool-carts/26-in-4-drawer-580-lb-capacity-glossy-black-roller-cart-61634.html
Caveat: Assembling it takes non-trivial effort, perhaps 2 hours. There
are 3 types of bolts, quite similar, but all of them, along with plenty
of nuts and washers, are conveniently included together in one bag. The
2 handle bolts are similar enough to the others, that I ended up with no
"handle bolts" the first go around.
BTW, for those that don't like Harbor Freight products, I saw the same
unit on Home Depot's web site for $119.99--so you could buy it there
instead! ; )
Bill
But the web page isn't the Sales page. Sale page shows lower even
prices. The Web page is the standard every day price.
Martin
On 3/10/2017 12:21 PM, [email protected] wrote:
> On Thu, 9 Mar 2017 23:18:33 -0600, Martin Eastburn
> <[email protected]> wrote:
>
>> Sales catalog is not the web page.
>
> It sure looked like a web page to me!
>
>
>> Martin
>>
>> On 3/9/2017 7:54 PM, [email protected] wrote:
>>> On Thu, 9 Mar 2017 19:05:56 -0500, Bill <[email protected]>
>>> wrote:
>>>
>>>> Tool Cart. In their "fat" sale catalog that came out at the beginning
>>>> of this month, the very first coupon on the first page is for the
>>>> following unit for $99.99. I never thought I'd own one of these, but
>>>> for this price I'll bite (actually, it was not a hard decision after
>>>> seeing it in person). It weighs a full 100 pounds, so that comes out to
>>>> a buck a pound.
>>>>
>>>> http://www.harborfreight.com/tool-storage/tool-carts/26-in-4-drawer-580-lb-capacity-glossy-black-roller-cart-61634.html
>>>>
>>>> Caveat: Assembling it takes non-trivial effort, perhaps 2 hours. There
>>>> are 3 types of bolts, quite similar, but all of them, along with plenty
>>>> of nuts and washers, are conveniently included together in one bag. The
>>>> 2 handle bolts are similar enough to the others, that I ended up with no
>>>> "handle bolts" the first go around.
>>>>
>>>> BTW, for those that don't like Harbor Freight products, I saw the same
>>>> unit on Home Depot's web site for $119.99--so you could buy it there
>>>> instead! ; )
>>>
>>> But the page you point to above has it for $149.99 (compare at
>>> $368.32!). ;-)
>>>
On Friday, March 10, 2017 at 12:25:38 PM UTC-5, Bill wrote:
> Bill Leonhardt wrote:
> > Actually thought about this as a "mobile" sharpening center. Grinders on top, accessories in drawers-roll over to lathe, etc.
>
> Realize that you need to open the top before you can open any of the
> drawers. This is probably mainly for security, as the top has a key.
If the locking mechanism is anything like the small three drawer toolbox I bought
at Tractor Supply, it is easily defeated. Closing the top pushes a bar down at
the back of the unit which locks the drawers. If you grind the top of the bar
off, the drawers won't lock. But, and this is big but....
The drawers will open when you move/ tilt the tool box. :-(
If you really want to keep the top closed and use the drawers but also lock
them for security or transport, you could install a "swing arm" system that
hinges on the side and swings in front of the drawers and then locks.
Seems like a lot of work, but it might help adapt the box for a specific purpose.
On Thu, 9 Mar 2017 23:18:33 -0600, Martin Eastburn
<[email protected]> wrote:
>Sales catalog is not the web page.
It sure looked like a web page to me!
>Martin
>
>On 3/9/2017 7:54 PM, [email protected] wrote:
>> On Thu, 9 Mar 2017 19:05:56 -0500, Bill <[email protected]>
>> wrote:
>>
>>> Tool Cart. In their "fat" sale catalog that came out at the beginning
>>> of this month, the very first coupon on the first page is for the
>>> following unit for $99.99. I never thought I'd own one of these, but
>>> for this price I'll bite (actually, it was not a hard decision after
>>> seeing it in person). It weighs a full 100 pounds, so that comes out to
>>> a buck a pound.
>>>
>>> http://www.harborfreight.com/tool-storage/tool-carts/26-in-4-drawer-580-lb-capacity-glossy-black-roller-cart-61634.html
>>>
>>> Caveat: Assembling it takes non-trivial effort, perhaps 2 hours. There
>>> are 3 types of bolts, quite similar, but all of them, along with plenty
>>> of nuts and washers, are conveniently included together in one bag. The
>>> 2 handle bolts are similar enough to the others, that I ended up with no
>>> "handle bolts" the first go around.
>>>
>>> BTW, for those that don't like Harbor Freight products, I saw the same
>>> unit on Home Depot's web site for $119.99--so you could buy it there
>>> instead! ; )
>>
>> But the page you point to above has it for $149.99 (compare at
>> $368.32!). ;-)
>>
On Thu, 9 Mar 2017 19:05:56 -0500, Bill <[email protected]>
wrote:
>Tool Cart. In their "fat" sale catalog that came out at the beginning
>of this month, the very first coupon on the first page is for the
>following unit for $99.99. I never thought I'd own one of these, but
>for this price I'll bite (actually, it was not a hard decision after
>seeing it in person). It weighs a full 100 pounds, so that comes out to
>a buck a pound.
>
>http://www.harborfreight.com/tool-storage/tool-carts/26-in-4-drawer-580-lb-capacity-glossy-black-roller-cart-61634.html
>
>Caveat: Assembling it takes non-trivial effort, perhaps 2 hours. There
>are 3 types of bolts, quite similar, but all of them, along with plenty
>of nuts and washers, are conveniently included together in one bag. The
>2 handle bolts are similar enough to the others, that I ended up with no
>"handle bolts" the first go around.
>
>BTW, for those that don't like Harbor Freight products, I saw the same
>unit on Home Depot's web site for $119.99--so you could buy it there
>instead! ; )
But the page you point to above has it for $149.99 (compare at
$368.32!). ;-)
[email protected] wrote:
> On Thu, 9 Mar 2017 19:05:56 -0500, Bill <[email protected]>
> wrote:
>
> >Tool Cart. In their "fat" sale catalog that came out at the beginning
> >of this month, the very first coupon on the first page is for the
> >following unit for $99.99. I never thought I'd own one of these, but
> >for this price I'll bite (actually, it was not a hard decision after
> >seeing it in person). It weighs a full 100 pounds, so that comes out to
> >a buck a pound.
> >
> >http://www.harborfreight.com/tool-storage/tool-carts/26-in-4-drawer-580-lb-capacity-glossy-black-roller-cart-61634.html
> >
> >Caveat: Assembling it takes non-trivial effort, perhaps 2 hours. There
> >are 3 types of bolts, quite similar, but all of them, along with plenty
> >of nuts and washers, are conveniently included together in one bag. The
> >2 handle bolts are similar enough to the others, that I ended up with no
> >"handle bolts" the first go around.
> >
> >BTW, for those that don't like Harbor Freight products, I saw the same
> >unit on Home Depot's web site for $119.99--so you could buy it there
> >instead! ; )
>
> But the page you point to above has it for $149.99 (compare at
> $368.32!). ;-)
http://www.hfqpdb.com/coupons/10_ITEM_26___4_DRAWER_TOOL_CART_1485835038.1364.jpg
http://www.hfqpdb.com/coupons/10_ITEM_26___4_DRAWER_TOOL_CART_1488987845.0433.JPG
http://www.hfqpdb.com/coupons/10_ITEM_26___4_DRAWER_TOOL_CART_1486387227.1444.png
http://www.hfqpdb.com/coupons/10_ITEM_26___4_DRAWER_TOOL_CART_1487889989.3613.jpg
Actually thought about this as a "mobile" sharpening center. Grinders on top, accessories in drawers-roll over to lathe, etc.
On Thursday, March 9, 2017 at 7:06:49 PM UTC-5, Bill wrote:
> Tool Cart. In their "fat" sale catalog that came out at the beginning
> of this month, the very first coupon on the first page is for the
> following unit for $99.99. I never thought I'd own one of these, but
> for this price I'll bite (actually, it was not a hard decision after
> seeing it in person). It weighs a full 100 pounds, so that comes out to
> a buck a pound.
>
> http://www.harborfreight.com/tool-storage/tool-carts/26-in-4-drawer-580-lb-capacity-glossy-black-roller-cart-61634.html
>
> Caveat: Assembling it takes non-trivial effort, perhaps 2 hours. There
> are 3 types of bolts, quite similar, but all of them, along with plenty
> of nuts and washers, are conveniently included together in one bag. The
> 2 handle bolts are similar enough to the others, that I ended up with no
> "handle bolts" the first go around.
>
> BTW, for those that don't like Harbor Freight products, I saw the same
> unit on Home Depot's web site for $119.99--so you could buy it there
> instead! ; )
>
> Bill
On Fri, 10 Mar 2017 02:14:46 +0000, Spalted Walt
<[email protected]> wrote:
>[email protected] wrote:
>
>> On Thu, 9 Mar 2017 19:05:56 -0500, Bill <[email protected]>
>> wrote:
>>
>> >Tool Cart. In their "fat" sale catalog that came out at the beginning
>> >of this month, the very first coupon on the first page is for the
>> >following unit for $99.99. I never thought I'd own one of these, but
>> >for this price I'll bite (actually, it was not a hard decision after
>> >seeing it in person). It weighs a full 100 pounds, so that comes out to
>> >a buck a pound.
>> >
>> >http://www.harborfreight.com/tool-storage/tool-carts/26-in-4-drawer-580-lb-capacity-glossy-black-roller-cart-61634.html
>> >
>> >Caveat: Assembling it takes non-trivial effort, perhaps 2 hours. There
>> >are 3 types of bolts, quite similar, but all of them, along with plenty
>> >of nuts and washers, are conveniently included together in one bag. The
>> >2 handle bolts are similar enough to the others, that I ended up with no
>> >"handle bolts" the first go around.
>> >
>> >BTW, for those that don't like Harbor Freight products, I saw the same
>> >unit on Home Depot's web site for $119.99--so you could buy it there
>> >instead! ; )
>>
>> But the page you point to above has it for $149.99 (compare at
>> $368.32!). ;-)
>
>http://www.hfqpdb.com/coupons/10_ITEM_26___4_DRAWER_TOOL_CART_1485835038.1364.jpg
>http://www.hfqpdb.com/coupons/10_ITEM_26___4_DRAWER_TOOL_CART_1488987845.0433.JPG
>http://www.hfqpdb.com/coupons/10_ITEM_26___4_DRAWER_TOOL_CART_1486387227.1444.png
>http://www.hfqpdb.com/coupons/10_ITEM_26___4_DRAWER_TOOL_CART_1487889989.3613.jpg
I didn't doubt that HF had it on sale, somewhere. They always do. I
was just tweaking Bill because $149.99 /< $119.99. ;-)
Sales catalog is not the web page.
Martin
On 3/9/2017 7:54 PM, [email protected] wrote:
> On Thu, 9 Mar 2017 19:05:56 -0500, Bill <[email protected]>
> wrote:
>
>> Tool Cart. In their "fat" sale catalog that came out at the beginning
>> of this month, the very first coupon on the first page is for the
>> following unit for $99.99. I never thought I'd own one of these, but
>> for this price I'll bite (actually, it was not a hard decision after
>> seeing it in person). It weighs a full 100 pounds, so that comes out to
>> a buck a pound.
>>
>> http://www.harborfreight.com/tool-storage/tool-carts/26-in-4-drawer-580-lb-capacity-glossy-black-roller-cart-61634.html
>>
>> Caveat: Assembling it takes non-trivial effort, perhaps 2 hours. There
>> are 3 types of bolts, quite similar, but all of them, along with plenty
>> of nuts and washers, are conveniently included together in one bag. The
>> 2 handle bolts are similar enough to the others, that I ended up with no
>> "handle bolts" the first go around.
>>
>> BTW, for those that don't like Harbor Freight products, I saw the same
>> unit on Home Depot's web site for $119.99--so you could buy it there
>> instead! ; )
>
> But the page you point to above has it for $149.99 (compare at
> $368.32!). ;-)
>
Bill Leonhardt wrote:
> Actually thought about this as a "mobile" sharpening center. Grinders on top, accessories in drawers-roll over to lathe, etc.
Realize that you need to open the top before you can open any of the
drawers. This is probably mainly for security, as the top has a key. I
like its mobility too--and it's can contain many of the small things
that are easy to misplace in a relatively organized and space-efficient
manner. That's what was attractive to me.
>
> On Thursday, March 9, 2017 at 7:06:49 PM UTC-5, Bill wrote:
>> Tool Cart. In their "fat" sale catalog that came out at the beginning
>> of this month, the very first coupon on the first page is for the
>> following unit for $99.99. I never thought I'd own one of these, but
>> for this price I'll bite (actually, it was not a hard decision after
>> seeing it in person). It weighs a full 100 pounds, so that comes out to
>> a buck a pound.
>>
>> http://www.harborfreight.com/tool-storage/tool-carts/26-in-4-drawer-580-lb-capacity-glossy-black-roller-cart-61634.html
>>
>> Caveat: Assembling it takes non-trivial effort, perhaps 2 hours. There
>> are 3 types of bolts, quite similar, but all of them, along with plenty
>> of nuts and washers, are conveniently included together in one bag. The
>> 2 handle bolts are similar enough to the others, that I ended up with no
>> "handle bolts" the first go around.
>>
>> BTW, for those that don't like Harbor Freight products, I saw the same
>> unit on Home Depot's web site for $119.99--so you could buy it there
>> instead! ; )
>>
>> Bill
On Thu, 9 Mar 2017 19:05:56 -0500
Bill <[email protected]> wrote:
> for the following unit for $99.99. I never thought I'd own one of
or 70 more for this
http://www.harborfreight.com/27-in-8-drawer-black-roller-cabinet-2-pc-combo-63026.html
On Thu, 9 Mar 2017 19:05:56 -0500, Bill <[email protected]> wrote:
> Tool Cart. In their "fat" sale catalog that came out at the beginning
> of this month, the very first coupon on the first page is for the
> following unit for $99.99. I never thought I'd own one of these, but
> for this price I'll bite (actually, it was not a hard decision after
> seeing it in person). It weighs a full 100 pounds, so that comes out to
> a buck a pound.
>
> http://www.harborfreight.com/tool-storage/tool-carts/26-in-4-drawer-580-lb-capacity-glossy-black-roller-cart-61634.html
>
> Caveat: Assembling it takes non-trivial effort, perhaps 2 hours. There
> are 3 types of bolts, quite similar, but all of them, along with plenty
> of nuts and washers, are conveniently included together in one bag. The
> 2 handle bolts are similar enough to the others, that I ended up with no
> "handle bolts" the first go around.
>
> BTW, for those that don't like Harbor Freight products, I saw the same
> unit on Home Depot's web site for $119.99--so you could buy it there
> instead! ; )
>
> Bill
I bought the red one at a parking lot sale ~5 yrs ago. Quite heavy
and surprisingly well made. As a matter of fact, mine is over-built
for the limited amount of storage space it provides.
<http://www.harborfreight.com/tool-storage/tool-carts/five-drawer-service-cart-95272.html>
Bill Leonhardt <[email protected]> wrote:
> Actually thought about this as a "mobile" sharpening center. Grinders on top, accessories in drawers-roll over to lathe, etc.
>
HF offers a fold-away shelf for the red cart that could be easily
drilled to fit the the black tool cart.
http://www.harborfreight.com/tool-cart-folding-side-tray-62207.html
https://www.youtube.com/watch?v=ozodEx0NWaA
https://www.youtube.com/watch?v=-wK7VgXd310#t=299