Wagner HVLP conversion gun

With that kind of output don't bother looking at anything but a gravity
feed, non bleeder, touch up gun. You may find one of those that will work
with that compressor.

--
Mike G.
[email protected]
Heirloom Woods
www.heirloom-woods.net
"jw" <[email protected]> wrote in message
news:[email protected]...
> Does anyone own or have used the wagner conversion gun?
>
>
http://www.amazon.com/exec/obidos/tg/detail/-/B00005NMSC/qid=1077716219/sr=1-1/ref=sr_1_1_etk-tools/104-4029457-6503152?v=glance&s=hi&n=228013
>
> I have a 2 HP CH compressor with an 8-gallon tank. The SCFM is 4 at
> 40 psi and 2.6 and 90 psi. I am looking for a conversion HVLP spray
> gun to do some occasional furniture finishing. Any conversion HVLP
> spray gun recommendations are appreciated.
> TIA
> Jody

Good question but I'm afraid I don't know the spec's on the gun so I can't
say.

Sorry

--
Mike G.
[email protected]
Heirloom Woods
www.heirloom-woods.net
"jw" <[email protected]> wrote in message
news:[email protected]...
> like the Porter Cable PSH2?
>
>
> "Mike G" <[email protected]> wrote in message
news:<[email protected]>...
> > With that kind of output don't bother looking at anything but a gravity
> > feed, non bleeder, touch up gun. You may find one of those that will
work
> > with that compressor.
> >
> > --
> > Mike G.
> > [email protected]
> > Heirloom Woods
> > www.heirloom-woods.net

like the Porter Cable PSH2?


"Mike G" <[email protected]> wrote in message news:<[email protected]>...
> With that kind of output don't bother looking at anything but a gravity
> feed, non bleeder, touch up gun. You may find one of those that will work
> with that compressor.
>
> --
> Mike G.
> [email protected]
> Heirloom Woods
> www.heirloom-woods.net