On Aug 18, 4:46=A0pm, Ignoramus28889 <ignoramus28...@NOSPAM.
28889.invalid> wrote:
> I am looking at this Bosch palm router for a certain application (high
> speed spindle for a CNC milling machine).
>
> =A0 =A0 =A0http://www.amazon.com/dp/B000ANQHTA-- Bosch PR20EVSK palm rout=
er
>
> And my question is, are there collets for 1/8" shank tools, that would
> be compatible with this palm router.
>
> Thanks
>
> i
Reducing sleeves.
On 2010-08-19, Lew Hodgett <[email protected]> wrote:
> RE: Subject
>
> If you go the reducer bushing road, assume they are going to fail and
> guard accordingly.
I tend to believe this.
My intended use of this Colt was as a high speed spindle for my CNC
milling machine.
http://igor.chudov.com/projects/Bridgeport-Series-II-Interact-2-CNC-Mill/
The idea was taken from this picture:
http://www.cnccookbook.com/img/OthersProjects/Tools/CoolantManifold_1.jpg
I also have a Bosch 1613EVS router, but it seems to be harder to
mount.
i
Try this link:
http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/bushing_ball_bearings.html
Adapter bushings for router colletts. I am not sure how close a tolerance
they have.
Lyndell
"Ignoramus28889" <[email protected]> wrote in message
news:[email protected]...
>I am looking at this Bosch palm router for a certain application (high
> speed spindle for a CNC milling machine).
>
> http://www.amazon.com/dp/B000ANQHTA -- Bosch PR20EVSK palm router
>
> And my question is, are there collets for 1/8" shank tools, that would
> be compatible with this palm router.
>
> Thanks
>
> i
>
>
On Thu, 19 Aug 2010 20:40:44 -0500, Ignoramus12820
<[email protected]> wrote:
>On 2010-08-19, Gordon Shumway <[email protected]> wrote:
>> On Wed, 18 Aug 2010 19:30:17 -0400, "J. Clarke"
>><[email protected]> wrote:
>>
>>>On 8/18/2010 6:39 PM, Gordon Shumway wrote:
>>>> On Wed, 18 Aug 2010 15:46:50 -0500, Ignoramus28889
>>>> <[email protected]> wrote:
>>>>
>>>>> I am looking at this Bosch palm router for a certain application (high
>>>>> speed spindle for a CNC milling machine).
>>>>>
>>>>> http://www.amazon.com/dp/B000ANQHTA -- Bosch PR20EVSK palm router
>>>>>
>>>>> And my question is, are there collets for 1/8" shank tools, that would
>>>>> be compatible with this palm router.
>>>>>
>>>>> Thanks
>>>>>
>>>>> i
>>>>>
>>>> Why don't you ask Bosch?
>>>
>>>For one thing, Bosch may not give a complete answer--they can tell you
>>>if they make one but if you don't luck into the right guy you may not
>>>find out about third party collets such as
>>><http://www.precisebits.com/products/equipment/bosch_colt_collets_nuts.asp>
>>>or adapter bushings such as
>>><http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/bushing_ball_bearings.html>.
>>>
>>>
>> I agree. But if the OP would have DAGS you wouldn't have had to the
>> work for him.
>
>I submitted a question to Bosch online yesterday afternoon, and they
>have not yet relpied.
>
>i
FYI: DAGS = Do A Google Search
On 8/18/2010 6:39 PM, Gordon Shumway wrote:
> On Wed, 18 Aug 2010 15:46:50 -0500, Ignoramus28889
> <[email protected]> wrote:
>
>> I am looking at this Bosch palm router for a certain application (high
>> speed spindle for a CNC milling machine).
>>
>> http://www.amazon.com/dp/B000ANQHTA -- Bosch PR20EVSK palm router
>>
>> And my question is, are there collets for 1/8" shank tools, that would
>> be compatible with this palm router.
>>
>> Thanks
>>
>> i
>>
> Why don't you ask Bosch?
For one thing, Bosch may not give a complete answer--they can tell you
if they make one but if you don't luck into the right guy you may not
find out about third party collets such as
<http://www.precisebits.com/products/equipment/bosch_colt_collets_nuts.asp>
or adapter bushings such as
<http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/bushing_ball_bearings.html>.
"J. Clarke" <[email protected]> wrote in message
news:[email protected]...
> On 8/18/2010 6:39 PM, Gordon Shumway wrote:
> > On Wed, 18 Aug 2010 15:46:50 -0500, Ignoramus28889
> > <[email protected]> wrote:
> >
> >> I am looking at this Bosch palm router for a certain application (high
> >> speed spindle for a CNC milling machine).
> >>
> >> http://www.amazon.com/dp/B000ANQHTA -- Bosch PR20EVSK palm router
> >>
> >> And my question is, are there collets for 1/8" shank tools, that would
> >> be compatible with this palm router.
> >>
> >> Thanks
> >>
> >> i
> >>
> > Why don't you ask Bosch?
>
> For one thing, Bosch may not give a complete answer--they can tell you
> if they make one but if you don't luck into the right guy you may not
> find out about third party collets such as
>
<http://www.precisebits.com/products/equipment/bosch_colt_collets_nuts.asp>
> or adapter bushings such as
>
<http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/bushi
ng_ball_bearings.html>.
>
Thanks for your post: I learned something! I came to this group to glean
what I could.
woodstuff
On Wed, 18 Aug 2010 15:46:50 -0500, Ignoramus28889
<[email protected]> wrote:
>I am looking at this Bosch palm router for a certain application (high
>speed spindle for a CNC milling machine).
>
> http://www.amazon.com/dp/B000ANQHTA -- Bosch PR20EVSK palm router
>
>And my question is, are there collets for 1/8" shank tools, that would
>be compatible with this palm router.
>
>Thanks
>
>i
>
Why don't you ask Bosch?
On Wed, 18 Aug 2010 19:30:17 -0400, "J. Clarke"
<[email protected]> wrote:
>On 8/18/2010 6:39 PM, Gordon Shumway wrote:
>> On Wed, 18 Aug 2010 15:46:50 -0500, Ignoramus28889
>> <[email protected]> wrote:
>>
>>> I am looking at this Bosch palm router for a certain application (high
>>> speed spindle for a CNC milling machine).
>>>
>>> http://www.amazon.com/dp/B000ANQHTA -- Bosch PR20EVSK palm router
>>>
>>> And my question is, are there collets for 1/8" shank tools, that would
>>> be compatible with this palm router.
>>>
>>> Thanks
>>>
>>> i
>>>
>> Why don't you ask Bosch?
>
>For one thing, Bosch may not give a complete answer--they can tell you
>if they make one but if you don't luck into the right guy you may not
>find out about third party collets such as
><http://www.precisebits.com/products/equipment/bosch_colt_collets_nuts.asp>
>or adapter bushings such as
><http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/bushing_ball_bearings.html>.
>
>
I agree. But if the OP would have DAGS you wouldn't have had to the
work for him.
Gordon Shumway
When you subsidize poverty and failure, you get more of both.
On 2010-08-19, Gordon Shumway <[email protected]> wrote:
> On Wed, 18 Aug 2010 19:30:17 -0400, "J. Clarke"
><[email protected]> wrote:
>
>>On 8/18/2010 6:39 PM, Gordon Shumway wrote:
>>> On Wed, 18 Aug 2010 15:46:50 -0500, Ignoramus28889
>>> <[email protected]> wrote:
>>>
>>>> I am looking at this Bosch palm router for a certain application (high
>>>> speed spindle for a CNC milling machine).
>>>>
>>>> http://www.amazon.com/dp/B000ANQHTA -- Bosch PR20EVSK palm router
>>>>
>>>> And my question is, are there collets for 1/8" shank tools, that would
>>>> be compatible with this palm router.
>>>>
>>>> Thanks
>>>>
>>>> i
>>>>
>>> Why don't you ask Bosch?
>>
>>For one thing, Bosch may not give a complete answer--they can tell you
>>if they make one but if you don't luck into the right guy you may not
>>find out about third party collets such as
>><http://www.precisebits.com/products/equipment/bosch_colt_collets_nuts.asp>
>>or adapter bushings such as
>><http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/bushing_ball_bearings.html>.
>>
>>
> I agree. But if the OP would have DAGS you wouldn't have had to the
> work for him.
I submitted a question to Bosch online yesterday afternoon, and they
have not yet relpied.
i