I need some cherry veneer ply, or paneling to finish a built in oven in
my kitchen. I only need 2 sheets. Any idea where I can get this in
Southern Ontario. I've checked HD, Rona etc. Lansing could get 3/4"
PB. A&M sells 1/8" and 1/16" veneer which I could laminate on some thin
ply, but this would be tricky I think on a large panel.
Any sources?
Thanks!
Rob
Hi Rob,
Looks like Peacock Lumber has it. Cheers, JG
http://www.peacocklumber.ca/PriceBook.asp?Page=19
Rob Mitchell wrote:
> I need some cherry veneer ply, or paneling to finish a built in oven in
> my kitchen. I only need 2 sheets. Any idea where I can get this in
> Southern Ontario. I've checked HD, Rona etc. Lansing could get 3/4"
> PB. A&M sells 1/8" and 1/16" veneer which I could laminate on some thin
> ply, but this would be tricky I think on a large panel.
>
> Any sources?
>
> Thanks!
>
> Rob
>>
>>
>>> I need some cherry veneer ply, or paneling to finish a built in oven in
>>> my kitchen. I only need 2 sheets. Any idea where I can get this in
>>> Southern Ontario. I've checked HD, Rona etc. Lansing could get 3/4"
For all the Toronto readers, I went to a place called Rayette Forest
Products. They handle only sheet goods but will sell to individuals and
have a variety of hardwood veneer plywoods. I asked and they will also
sell me solid surface materials.
Rob
JGS wrote:
> Hi Rob,
> Looks like Peacock Lumber has it. Cheers, JG
>
> http://www.peacocklumber.ca/PriceBook.asp?Page=19
>
> Rob Mitchell wrote:
>
>
>>I need some cherry veneer ply, or paneling to finish a built in oven in
>>my kitchen. I only need 2 sheets. Any idea where I can get this in
>>Southern Ontario. I've checked HD, Rona etc. Lansing could get 3/4"
>>PB. A&M sells 1/8" and 1/16" veneer which I could laminate on some thin
>>ply, but this would be tricky I think on a large panel.
>>
>>Any sources?
>>
>>Thanks!
>>
>>Rob
>
>
Thanks JGS
I also found a place out near Stratford but peacock had lower prices by
the look of it.
Rob
Don't know if you have a Lowes near you, but if you do, you can go to
the cabinet department and actually order a variety of hardwood sheet
goods finished to match their cabinet samples. I also believe that
you can give them a sample and they will match your finish. Of
course, it's not cheap, but if you want a nice factory applied finish,
to make filler panels... this can't be beat.
We used it on a restaurant counter buildout a couple of years ago
where we mounted spaced doors over the finished sheet plywood to
create a 3-D wainscoat effect.
Mike
On Wed, 11 Jan 2006 00:33:58 -0500, Rob Mitchell
<[email protected]> wrote:
>I need some cherry veneer ply, or paneling to finish a built in oven in
>my kitchen. I only need 2 sheets. Any idea where I can get this in
>Southern Ontario. I've checked HD, Rona etc. Lansing could get 3/4"
>PB. A&M sells 1/8" and 1/16" veneer which I could laminate on some thin
>ply, but this would be tricky I think on a large panel.
>
>Any sources?
>
>Thanks!
>
>Rob