JJ wrote:
> I like the aluminum angle piece supporting your fence. Can you tell me
> where you get something like that? Have you found it to be square
> enough?
>
> Jeff
>
Sorry about the delay - we had an ISP problem, and the holidays just extended it...
The 3" x 3" x 1/4" aluminum angle is a standard size, and I've found it plenty
sturdy enough to support the tall fence faces. I went to a local metal supply
yard and got pieces from their cutoff bin. (That's also the same way I got all
the steel parts for the table saw fence.) A quick Google showed hundreds of hits
for metal suppliers, including https://www.metalsdepot.com/.
There are strips of slippery tape on the bottom side of the aluminum angle to
let the fence slide easily on the table. As I recall, there are two layers (of
tape) near the front and one layer near the back to adjust the fence face square
to the table top.
--
JeffB
remove no.spam. to email