If you mean the white tube that's the PVC line from my DC to the other side
of the room. It runs over the suspended ceiling and down the opposite wall.
Thanks much for the nice comments!
--
Jeff P.
Check out my woodshop at: www.sawdustcentral.com
*What was the best thing before sliced bread?
*How do they get a deer to cross at the yellow road sign?
*Why is there an expiration on sour cream? It's already sour isn't it?
*Why do kamikaze pilots wear helmets?
"Never Enough Money" <[email protected]> wrote in message
news:[email protected]...
> Nice shop! I am so jealous.
>
> What's the thing coming out of the ceiling above your router table? A
> sky light?
>
> Good idea on the outfeed "table" for your table saw.
>
> Liked the wall shelves, too.
>
>
>
> Jeff P. wrote:
> [snip
> > Check out my woodshop at: www.sawdustcentral.com
> [snip]
>
In article <[email protected]>, George <george@least> wrote:
>
>"Morris Dovey" <[email protected]> wrote in message
>news:[email protected]...
>> Dave O'Heare wrote:
>>
>> > So, what kind of watch was it? You make a brand name
>> > suggestion, was that what you bought?
>>
>> Yes - it's a plain Rolex from the days when the company built
>> watches accurate enough that they could be used for navigation.
>> The case, stem and band are plain old stainless steel. And even
>> though it doesn't understand Daylight Savings Time or time zones,
>> it hasn't missed a tick (5.00000/sec) for over forty years.
>>
>> That's better than any other machine I've ever owned.
>>
>
>Yet the buck three eighty quartz jobs keep as accurate time, if not better,
No, they do _not_.
A "good" digital will have a claimed error of less than 10 seconds per day.
If you're lucky, for a specific watch, it will be under 3 sec/day.
Budget brands claim 30 seconds/day. The _really_ cheap ones don't make *any*
accuracy claims whatsoever. And keep significantly "different time" depending
on the temperature.
Furthermore, I have _yet_ to see a sub-thousand-dollar quartz watch that
can be 'adjusted' for minimum error.
A reasonable quality mainspring-based watch -- e.g. Seiko, Benrus -- is
capable of accuracy that is orders of magnitude better. Mostly because
it *can* be adjusted (the technal term is "regulated"). The trick lies
*entirely* in finding a good watchmaker; one who has the proper tooling.
I have mainspring wristwatches that keep time accurate to a fraction of a
second *per*week*. If the error rate gets to around 30 seconds _per_month_,
it goes back to the watchmaker for tweaking. Typically, every 5 years or so.
Today's Rolex's *are* grossly over-priced -- they're a status symbol more
than anything else.
Back in the post-WWII days, and up into the 1960s, they sold mostly "working"
watches, with a small "showpiece" line. The 'working' watches were not
inexpensive, by any means, _but_ if you wanted a *durable*, *reliable*,
timepiece that would survive hostile conditions, Rolex was _the_ choice.
You bought a Rolex if you wanted a watch that you _knew_ would keep running
for 20 years or more -- regardless of what kind of environment it was
subjected to. One could get something "adequate" for 1/4 the money, and
haveto replace it every couple of years or so -- in a 'hostile' environment,
that is. Factoring in longevity, Rolex "Oyster" was a bargain at the
price.
In article <[email protected]>, George <george@least> wrote:
>
>"Robert Bonomi" <[email protected]> wrote in message
>news:[email protected]...
>> In article <[email protected]>, George <george@least> wrote:
>> >
>> >"Morris Dovey" <[email protected]> wrote in message
>> >news:[email protected]...
>> >> Dave O'Heare wrote:
>> >>
>> >> > So, what kind of watch was it? You make a brand name
>> >> > suggestion, was that what you bought?
>> >>
>> >> Yes - it's a plain Rolex from the days when the company built
>> >> watches accurate enough that they could be used for navigation.
>> >> The case, stem and band are plain old stainless steel. And even
>> >> though it doesn't understand Daylight Savings Time or time zones,
>> >> it hasn't missed a tick (5.00000/sec) for over forty years.
>> >>
>> >> That's better than any other machine I've ever owned.
>> >>
>> >
>> >Yet the buck three eighty quartz jobs keep as accurate time, if not
>better,
>>
>> No, they do _not_.
>>
>> A "good" digital will have a claimed error of less than 10 seconds per
>day.
>> If you're lucky, for a specific watch, it will be under 3 sec/day.
>> Budget brands claim 30 seconds/day. The _really_ cheap ones don't make
>*any*
>> accuracy claims whatsoever. And keep significantly "different time"
>depending
>> on the temperature.
>>
>> Furthermore, I have _yet_ to see a sub-thousand-dollar quartz watch that
>> can be 'adjusted' for minimum error.
>>
>> A reasonable quality mainspring-based watch -- e.g. Seiko, Benrus -- is
>> capable of accuracy that is orders of magnitude better. Mostly because
>> it *can* be adjusted (the technal term is "regulated"). The trick lies
>> *entirely* in finding a good watchmaker; one who has the proper tooling.
>> I have mainspring wristwatches that keep time accurate to a fraction of a
>> second *per*week*. If the error rate gets to around 30 seconds
>_per_month_,
>> it goes back to the watchmaker for tweaking. Typically, every 5 years or
>so.
>>
>>
>
>I'm sure you believe what you're saying, but, the "wrist chronometers" were
>regulated for the average of three axes, and too long in any one reduced the
>accuracy. They even included directions for regulation by placement in the
>owner's manual. A true chronometer was regulated for one position only,
>which made a great accuracy possible, but also made it a pampered, shock
>isolated charge for a junior officer, who kept a log of errors to estimate
>inaccuracy when a time check was not available.
I'm speaking from direct personal experience, over a span of more than 30
years, with 'quality' manufacturer, moderately priced (i.e. retail-priced
in the $50-125 range) "wristwatches" -- *NOT* the high-priced (and mis-named)
'chronometer' types.
>
>My 19.95 Timex is still doing < 1 second/day as it nears the end of its
>battery life at four years old.
Congrats! You're one of the lucky ones who got a watch where the crystal
is close to the middle of the 'acceptable' range.
> The Rolex (O-P) did the same for about two
>years at a time before it had to go in for regulation and cleaning. As I
>never had anyone who did the job - authorized only - guarantee accuracy
>after the fact, I wouldn't know about your technician.
The jewelers (plural, in several states) I've used didn't "guarantee"
accuracy, either. They merely *delivered* it. <grin> It did help
_considerably_ that I could tell them fairly precisely how much it gained/lost
per period. e.g. I'd go in saying "it's running about 8-1/2 seconds/week
fast", and I'd get it back running 8+ seconds/week slower.
With a 'new' watch, it's typically taken me 4-6 adjustments, over a period
of several months, to get it fined down to the 'seconds/month' accuracy.
My 2nd watch, a mail-order $50 Seiko (in the early 1970s) came out of the
factory running 87(!!) seconds/day fast. 3 trips through the local
quality watchmaker/jeweler shop later, and it was approx. 1/2 sec/week.
I was/am involved in SWL as a hobby, so I would check against the broadcast
NBS/NIST time reference on WWV. This gave me 'interval' accuracy in the
sub-millisecond range, although "absolute" time had an offset in the tens
of milliseconds.
I didn't really mean to stir up a chronometer debate. Most of us
never need that kind of accuracy, tho I'll admit that it has been
a convenience to not need to worry about my wrist time wandering
from what the radio and TV gives.
What I have liked is that the darned thing has taken a beating -
for a lot of years - and kept on working really well. It isn't a
piece of "foo-foo" jewelery, it's a dependable machine, an
anachronism almost, from the time before all things became
disposable. It's so not "foo-foo" that I have another (not Rolex)
watch that I wear for dress occasions (except that the battery
for that watch is dead, again.)
My point was - and is - that if you happen to be hard on watches,
an old plain vanilla stainless steel Rolex may be a worthwhile
alternative to a succession of disposables.
I wish I could find a sander that'd hold up so well.
--
Morris Dovey
DeSoto Solar
DeSoto, Iowa USA
http://www.iedu.com/DeSoto/solar.html
On Thu, 24 Feb 2005 15:10:05 GMT, [email protected] (Lawrence
Wasserman) wrote:
>In article <[email protected]>,
>Never Enough Money <[email protected]> wrote:
>>There are lot of aprons to choose from -- $10 to $85.
>>
>>So is the Lie-Nielsen ($85) just a status symbol or is it worth $85?
>>
>>http://www.lie-nielsen.com/tool.html?id=APR
>>
>
>10 is about twice what I'd be willing to spend on a shop apron.
>http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=43636
>~
Like a Squirrel, I think I'd prefer to protect my nuts...
In article <[email protected]>, Larry Jaques
<novalidaddress@di\/ersify.com> says...
> On Tue, 01 Mar 2005 21:23:12 GMT, the inscrutable Badger
> <[email protected]> spake:
>
> >Larry Jaques wrote:
> >> Now where in HELL can I buy a nice, discreet Casio watch with NO bold
> >> and colorful printing smeared all over it? I like Casio's countdown
> >> timers and alarms far better than Timex.
> >
> >I like casio too, last one lasted over 25 years, including a trip
> >through a roof and a fall of 18 feet, with me attached, into hard-core
> >with little more than a scratch on the glass and a dent in the rim
>
> Maybe I'll write to Casio and say "_Enough_ with the text, just
> give me a plain watch.
When I retired from my computer job, I tossed my wristwatch and bought a
pocket watch. Most of the time it's in the bottom of a side pocket,
since few pants come with watch pockets any more.
The one I have now is a Benrus quartz from Walmart. I think I paid
about $13 for it, and it's been running for over a year - has a day of
the month as well as the time.
BTW, Walmart has some cheaper ones, under $10. I've had two of those.
One ran fine for 3-4 years, the other crapped out in 3-4 months. That's
when I "upgraded" to the "expensive" model :-).
--
Homo sapiens is a goal, not a description
On Thu, 24 Feb 2005 03:30:56 GMT, "Edwin Pawlowski" <[email protected]> wrote:
>
>"Never Enough Money" <[email protected]> wrote in message
>news:[email protected]...
>> There are lot of aprons to choose from -- $10 to $85.
>>
>> So is the Lie-Nielsen ($85) just a status symbol or is it worth $85?
>>
>> http://www.lie-nielsen.com/tool.html?id=APR
>>
>
>
>Nice. Leather is costly.
>
>I'd consider this one for $25, but it is shorter
>http://www.leevalley.com/wood/page.aspx?c=2&p=32079&cat=1,43413,45989
>
>But I bought this one for $18 Easily fit my generously shaped (but still
>sexy) abdomen.
>http://www.leevalley.com/wood/page.aspx?c=2&p=32078&cat=1,43413,45989
>
The Lie-Nielson (and the WWS version I referenced earlier) have the 'X"
strap in back -- I really like that feature, beats having a strap around
the neck.
+--------------------------------------------------------------------------------+
The absence of accidents does not mean the presence of safety
Army General Richard Cody
+--------------------------------------------------------------------------------+
I like mine. However, I do metalwork as well as making shavings!
Dave
"Never Enough Money" <[email protected]> wrote in message
news:[email protected]...
> There are lot of aprons to choose from -- $10 to $85.
>
> So is the Lie-Nielsen ($85) just a status symbol or is it worth $85?
>
> http://www.lie-nielsen.com/tool.html?id=APR
>
Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com
On 23 Feb 2005 18:12:06 -0800, "Never Enough Money"
<[email protected]> wrote:
Why not check this Ebay store?
http://cgi3.ebay.com/ws/eBayISAPI.dll?ViewUserPage&userid=ehwa_apron
>There are lot of aprons to choose from -- $10 to $85.
>
>So is the Lie-Nielsen ($85) just a status symbol or is it worth $85?
>
>http://www.lie-nielsen.com/tool.html?id=APR
>
> This reminds me of the people who drive around for years with the dealer's
> license plate holders on their car. The first thing I do is get rid of
> those.
As a car dealer, I like the dealer licenses plate frames. We appreaciate
all those that continue to wear our name proudly.
Dave
Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com
I don't know - I was wearing a denim Woodcraft shirt that ended up landing
me a paying commission!
Grant
John wrote:
> Actually, I expect companies to PAY ME for doing their advertising. I
> don't wear ballcaps with tool maker's names/logos on them, don't wear
> shirts wtih advertising on them either. They want ME to wear THEIR
> advertising, then at least they can GIVE the shirt/hat/whatever to me
> for FREE
>
> John
>
> On 28 Feb 2005 18:46:29 -0800, "Never Enough Money"
> <[email protected]> wrote:
>
> >Speaking of Lie-Nielsen cache, the LN apron has "Lie-Nileson" embossed
> >on the chest. I don't care who you are, you must admit that's cool.
Larry Jaques wrote:
...
> Maybe I'll write to Casio and say "_Enough_ with the text, just
> give me a plain watch. I don't need to know it's WATERPROOF TO
> 300 FEET, SHOCKPROOF TO 50Gs, ALARM, CHRONO, TIMER and all that
> other stuff which should be found in the manual (and/or on the bezel),
> NOT on the face of the watch."
Me, too...I'm terribly destructive on watches so I've gone to buying the
$8 whatever of the day that's the smallest profile analog face thing
(hopefully <not> Chinese altho that's getting harder) and saving the
40-year old Bulova folks got me for HS graduation for non-every day...
"Morris Dovey" <[email protected]> wrote in message
news:[email protected]...
> Dave O'Heare wrote:
>
> > So, what kind of watch was it? You make a brand name
> > suggestion, was that what you bought?
>
> Yes - it's a plain Rolex from the days when the company built
> watches accurate enough that they could be used for navigation.
> The case, stem and band are plain old stainless steel. And even
> though it doesn't understand Daylight Savings Time or time zones,
> it hasn't missed a tick (5.00000/sec) for over forty years.
>
> That's better than any other machine I've ever owned.
>
Yet the buck three eighty quartz jobs keep as accurate time, if not better,
and you can take 'em off at night without sacrificing accuracy. Oh yes,
and pitch them if the crystal scratches rather than pay 180 bucks for a
replacement.
"Robert Bonomi" <[email protected]> wrote in message
news:[email protected]...
> In article <[email protected]>, George <george@least> wrote:
> >
> >"Morris Dovey" <[email protected]> wrote in message
> >news:[email protected]...
> >> Dave O'Heare wrote:
> >>
> >> > So, what kind of watch was it? You make a brand name
> >> > suggestion, was that what you bought?
> >>
> >> Yes - it's a plain Rolex from the days when the company built
> >> watches accurate enough that they could be used for navigation.
> >> The case, stem and band are plain old stainless steel. And even
> >> though it doesn't understand Daylight Savings Time or time zones,
> >> it hasn't missed a tick (5.00000/sec) for over forty years.
> >>
> >> That's better than any other machine I've ever owned.
> >>
> >
> >Yet the buck three eighty quartz jobs keep as accurate time, if not
better,
>
> No, they do _not_.
>
> A "good" digital will have a claimed error of less than 10 seconds per
day.
> If you're lucky, for a specific watch, it will be under 3 sec/day.
> Budget brands claim 30 seconds/day. The _really_ cheap ones don't make
*any*
> accuracy claims whatsoever. And keep significantly "different time"
depending
> on the temperature.
>
> Furthermore, I have _yet_ to see a sub-thousand-dollar quartz watch that
> can be 'adjusted' for minimum error.
>
> A reasonable quality mainspring-based watch -- e.g. Seiko, Benrus -- is
> capable of accuracy that is orders of magnitude better. Mostly because
> it *can* be adjusted (the technal term is "regulated"). The trick lies
> *entirely* in finding a good watchmaker; one who has the proper tooling.
> I have mainspring wristwatches that keep time accurate to a fraction of a
> second *per*week*. If the error rate gets to around 30 seconds
_per_month_,
> it goes back to the watchmaker for tweaking. Typically, every 5 years or
so.
>
>
I'm sure you believe what you're saying, but, the "wrist chronometers" were
regulated for the average of three axes, and too long in any one reduced the
accuracy. They even included directions for regulation by placement in the
owner's manual. A true chronometer was regulated for one position only,
which made a great accuracy possible, but also made it a pampered, shock
isolated charge for a junior officer, who kept a log of errors to estimate
inaccuracy when a time check was not available.
My 19.95 Timex is still doing < 1 second/day as it nears the end of its
battery life at four years old. The Rolex (O-P) did the same for about two
years at a time before it had to go in for regulation and cleaning. As I
never had anyone who did the job - authorized only - guarantee accuracy
after the fact, I wouldn't know about your technician. Once it stunk, and
went back to the same place, there being only one available, and still stunk
when it came back. Had to wait to get back to the States and pay again.
The last years have been a series of quartz types, disposable, accurate,
though plebian.
Oh yes, time was very important to me and my job, so accuracy was verified
prior to every mission. I even check in retirement, out of habit.
Larry Jaques wrote:
> Now where in HELL can I buy a nice, discreet Casio watch with NO bold
> and colorful printing smeared all over it? I like Casio's countdown
> timers and alarms far better than Timex.
I like casio too, last one lasted over 25 years, including a trip
through a roof and a fall of 18 feet, with me attached, into hard-core
with little more than a scratch on the glass and a dent in the rim (I
was knocked out, broke my sturnum, and the damage to my left knee still
causes problems, the inch thick 8x4 sheet of ply that followed me
through missed!). My Christmas present Timex lasted 7 weeks before the
winder (adjuster) spindle broke....
Dave O'Heare wrote:
> So, what kind of watch was it? You make a brand name
> suggestion, was that what you bought?
Yes - it's a plain Rolex from the days when the company built
watches accurate enough that they could be used for navigation.
The case, stem and band are plain old stainless steel. And even
though it doesn't understand Daylight Savings Time or time zones,
it hasn't missed a tick (5.00000/sec) for over forty years.
That's better than any other machine I've ever owned.
--
Morris Dovey
DeSoto Solar
DeSoto, Iowa USA
http://www.iedu.com/DeSoto/solar.html
Guess you never had a Lie-Nielsen plane.
-Dan V.
On Mon, 28 Feb 2005 21:53:39 -0600, John <[email protected]> wrote:
>Actually, I expect companies to PAY ME for doing their advertising. I
>don't wear ballcaps with tool maker's names/logos on them, don't wear
>shirts wtih advertising on them either. They want ME to wear THEIR
>advertising, then at least they can GIVE the shirt/hat/whatever to me
>for FREE
>
>John
>
>On 28 Feb 2005 18:46:29 -0800, "Never Enough Money"
><[email protected]> wrote:
>
>>Speaking of Lie-Nielsen cache, the LN apron has "Lie-Nileson" embossed
>>on the chest. I don't care who you are, you must admit that's cool.
On Thu, 24 Feb 2005 03:02:05 GMT, "John Grossbohlin"
<[email protected]> wrote:
>
>"Never Enough Money" <[email protected]> wrote in message
>news:[email protected]...
>> There are lot of aprons to choose from -- $10 to $85.
>>
>> So is the Lie-Nielsen ($85) just a status symbol or is it worth $85?
>>
>> http://www.lie-nielsen.com/tool.html?id=APR
>>
>
>Being leather it would put up with a fair amount of abrasion compared to the
>typical cotton apron... and gain character with use!
>
>John
>
Agreed. But my $25 leather apron from Woodworker's Supply seems to fit
the bill without the cache associated with a Lie Nielson status symbol
<http://woodworker.com/cgi-bin/FULLPRES.exe?PARTNUM=42028>
You want flaps, they'll cost $25 more:
<http://woodworker.com/cgi-bin/FULLPRES.exe?PARTNUM=137-183>
+--------------------------------------------------------------------------------+
The absence of accidents does not mean the presence of safety
Army General Richard Cody
+--------------------------------------------------------------------------------+
Never Enough Money wrote:
> There are lot of aprons to choose from -- $10 to $85.
>
> So is the Lie-Nielsen ($85) just a status symbol or is it worth $85?
>
> http://www.lie-nielsen.com/tool.html?id=APR
>
It is leather, and it does say "Lie Nielsen" on it. <G>
Seriously, I use a Bucket Boss apron that collects enough dust and
shavings in the pockets to fill a guinea pig cage. The upside is that I
almost like the pocket layout, and I can toss it in the washer. I've
also used a Duluth "fire hose" apron, which I found too hot,
restrictive, and heavy.
To me, the LN apron looks hot to wear, but it looks like it would work OK.
The perfect shop apron for me is not yet out there!
Barry
"Never Enough Money" <[email protected]> wrote in message
news:[email protected]...
> There are lot of aprons to choose from -- $10 to $85.
>
> So is the Lie-Nielsen ($85) just a status symbol or is it worth $85?
>
> http://www.lie-nielsen.com/tool.html?id=APR
>
Save your money and buy it here for less than half that price.
http://www.grizzly.com/products/item.cfm?itemnumber=G9123
Well, it's nice and all but it doesn't have a pocket for a shop pencil.
--
Jeff P.
Check out my woodshop at: www.sawdustcentral.com
*What was the best thing before sliced bread?
*How do they get a deer to cross at the yellow road sign?
*Why is there an expiration on sour cream? It's already sour isn't it?
*Why do kamikaze pilots wear helmets?
"Andy Dingley" <[email protected]> wrote in message
news:[email protected]...
> It was somewhere outside Barstow when Joe Wells
> <[email protected]> wrote:
>
> >Status symbol, feh.
>
> If you just want an apron as a status symbol, try this
>
http://www.phoenixmasonry.org/masonicmuseum/masonic_apron_of_alf_t_ringling.htm
>
> (Interesting little story actually)
>
I bought my denim/cotton apron at Anderson's general store in Lima,
Ohio. Nice store...you can buy work clothes, grass seed, snowthrowers,
tools, hardware and even alcoholic beverages. SWMBO's brother runs a
cabinet shop. He uses a leather apron. My bet is he didn't buy it from
LN at $85. I like mine, but I only use about half the time anyway.
Cheers.
Joe
Never Enough Money wrote:
> There are lot of aprons to choose from -- $10 to $85.
>
> So is the Lie-Nielsen ($85) just a status symbol or is it worth $85?
>
> http://www.lie-nielsen.com/tool.html?id=APR
>
"Morris Dovey" <[email protected]> wrote in message
news:[email protected]...
> I
> went to a little jewelery store in Fayetteville, NC (Hatchers
> Jewelery?) and told the owner that I wanted a watch that'd take a
> /real/ lickin' and keep on tickin'.
>
> He said he had just the watch. A bit pricey (almost $300!), but
> carried an unconditional guarantee. I gave him half of that and
> told him that I'd be back next payday with the other half to pick
> up the watch. He surprised me by telling me to put the watch on
> and that he expected to see me on payday...
>
> It's on my wrist now. Since then it's survived horrific
> ill-treatment - everything from really lousy parachute landings
> to salt water sailing and diving to years of EMF in a lab - and I
> don't think I've ever not worn it in the shop. I did once manage
> to shred a stainless band; but that accident didn't damage the
> case. With a "tune up" every ten or twelve years, it's stayed
> accurate to within a second or two a day.
>
> The manufacturer's current offerings have become IMHO /too/
> pricey; but it might be worth looking for a /used/ plain vanilla
> Rolex. It'll probably outlast the wearer.
>
> ...Oh yes, for anyone wondering - I did go back the next payday
> with the other half of the payment.
So, what kind of watch was it? You make a brand name suggestion, was that
what you bought?
Dave O'H
oheareATmagmaDOTca
"TeamCasa" <[email protected]> wrote in message
news:[email protected]...
>> This reminds me of the people who drive around for years with the
>> dealer's
>> license plate holders on their car. The first thing I do is get rid of
>> those.
>
> As a car dealer, I like the dealer licenses plate frames. We appreaciate
> all those that continue to wear our name proudly.
>
> Dave
I'm sure you do. Never had a car, new or used, that kept the dealer name
for more than an hour after I got it home. Last three the dealer did not
bother putting his name on them. Years ago, we'd removed even the car
maker's ornaments to clean up a car.
We had a dealer in town that had the most awful looking oversized sticker on
his cars. I was ready to buy and told him we had a deal. Just remove the
sticker. He refused. I walked. Evidently others did too as he folded in
less than a year.
Ed
Of course you do. If you pay me to do so, I'll display your frame.
"TeamCasa" <[email protected]> wrote in message
news:[email protected]...
> > This reminds me of the people who drive around for years with the
dealer's
> > license plate holders on their car. The first thing I do is get rid of
> > those.
>
> As a car dealer, I like the dealer licenses plate frames. We appreaciate
> all those that continue to wear our name proudly.
>
> Dave
>
>
>
> Posted Via Usenet.com Premium Usenet Newsgroup Services
> ----------------------------------------------------------
> ** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
> ----------------------------------------------------------
> http://www.usenet.com
"Rick Cook" <[email protected]> wrote in message
news:[email protected]...
>
>>
>>
>> Being leather it would put up with a fair amount of abrasion compared to
>> the typical cotton apron... and gain character with use!
>>
>> John
> Leather is better for a shop apron -- but that much better?
NO. You can get a leather apron at Grizzly.com for $37.95.
Home made (or made by a friend) is the way to go. I have a leather worker
friend who made one for me in exchange for some really basic woodworking.
Total value of the exchange was about $10.
"leonard" <[email protected]> wrote in message
news:[email protected]...
> I like the one my wife made, it's kevlar with some type of soft
coating
> that is light seems to be able to take the shop.She's a rocket scientist
so
> who knows were she got the materials.
>
> len
> >
>
>
"Never Enough Money" <[email protected]> wrote in message
news:[email protected]...
> There are lot of aprons to choose from -- $10 to $85.
>
> So is the Lie-Nielsen ($85) just a status symbol or is it worth $85?
>
> http://www.lie-nielsen.com/tool.html?id=APR
>
Being leather it would put up with a fair amount of abrasion compared to the
typical cotton apron... and gain character with use!
John
"Never Enough Money" <[email protected]> wrote in message
news:[email protected]...
> There are lot of aprons to choose from -- $10 to $85.
>
> So is the Lie-Nielsen ($85) just a status symbol or is it worth $85?
>
> http://www.lie-nielsen.com/tool.html?id=APR
>
Nice. Leather is costly.
I'd consider this one for $25, but it is shorter
http://www.leevalley.com/wood/page.aspx?c=2&p=32079&cat=1,43413,45989
But I bought this one for $18 Easily fit my generously shaped (but still
sexy) abdomen.
http://www.leevalley.com/wood/page.aspx?c=2&p=32078&cat=1,43413,45989
"Dan Valleskey" <valleskey at comcast dot net> wrote in message
news:[email protected]...
>
> Guess you never had a Lie-Nielsen plane.
>
>
> -Dan V.
I've had a lot of quality tools, bought from quality companies, but I still
won't buy and pay for anything with there logo. I have probably a dozen
shirts with corporate logos on them. Every one was FREE. Yes, I'll wear
them. I'll even wear one that says "Dan Valleskey for Mayor" if you give it
to me for FREE.
Edwin Pawlowski wrote:
> I'd consider this one for $25, but it is shorter
> http://www.leevalley.com/wood/page.aspx?c=2&p=32079&cat=1,43413,45989
>
> But I bought this one for $18 Easily fit my generously shaped (but still
> sexy) abdomen.
> http://www.leevalley.com/wood/page.aspx?c=2&p=32078&cat=1,43413,45989
Here's the Bucket Boss:
<http://www.coastaltool.com/cgi-bin/welcome.pl?ref=froogle+page=/a/ab/boss/bo83200.htm>
Barry
I make my own.
"Rick Cook" <[email protected]> wrote in message
news:[email protected]...
> leonard wrote:
> > I like the one my wife made, it's kevlar with some type of soft
coating
> > that is light seems to be able to take the shop.She's a rocket scientist
so
> > who knows were she got the materials.
> >
> > len
> >
> >
> >
> Len, never ask questions you don't want to know the answer to.
>
> Seriously, when I want an apron my wife whips one up for me, to my design.
>
> There are certain advantages to this marriage thing.
>
> --RC
"Rick Cook" <[email protected]> wrote in message
news:[email protected]...
> John Grossbohlin wrote:
>> "Never Enough Money" <[email protected]> wrote in message
>> news:[email protected]...
>>
>>>There are lot of aprons to choose from -- $10 to $85.
>>>
>>>So is the Lie-Nielsen ($85) just a status symbol or is it worth $85?
>>>
>>>http://www.lie-nielsen.com/tool.html?id=APR
>>>
>>
>>
>> Being leather it would put up with a fair amount of abrasion compared to
>> the typical cotton apron... and gain character with use!
>>
>> John
> Leather is better for a shop apron -- but that much better?
Well, I guess you could put it in perspective by comparing a Stanley No 4 to
an L-N No 4... yeah my tuned up Stanley No 4 (read cotton apron) works
pretty well but my L-N No 4 (read leather apron) is noticeably nicer to use.
;-)
John
"Never Enough Money" <[email protected]> wrote in
news:[email protected]:
> There are lot of aprons to choose from -- $10 to $85.
>
> So is the Lie-Nielsen ($85) just a status symbol or is it worth $85?
>
> http://www.lie-nielsen.com/tool.html?id=APR
>
Wow, pretty pricey. I know some carvers like leather (for the protection),
but I'm not sure why leather would be desirable for the rest of us.
Here's the one I use, and I love it.
http://www.duluthtrading.com/items/83490.asp
Ahh, well...I don't think I'd ever live it down if someone saw me wearing
one of those flowered aprons.
--
Jeff P.
Check out my woodshop at: www.sawdustcentral.com
*What was the best thing before sliced bread?
*How do they get a deer to cross at the yellow road sign?
*Why is there an expiration on sour cream? It's already sour isn't it?
*Why do kamikaze pilots wear helmets?
"Rosalind" <[email protected]> wrote in message
news:[email protected]...
> On 23 Feb 2005 18:12:06 -0800, "Never Enough Money"
> <[email protected]> wrote:
>
> Why not check this Ebay store?
>
> http://cgi3.ebay.com/ws/eBayISAPI.dll?ViewUserPage&userid=ehwa_apron
>
>
> >There are lot of aprons to choose from -- $10 to $85.
> >
> >So is the Lie-Nielsen ($85) just a status symbol or is it worth $85?
> >
> >http://www.lie-nielsen.com/tool.html?id=APR
> >
leonard wrote:
> I like the one my wife made, it's kevlar with some type of soft coating
> that is light seems to be able to take the shop.She's a rocket scientist so
> who knows were she got the materials.
>
> len
>
>
>
Len, never ask questions you don't want to know the answer to.
Seriously, when I want an apron my wife whips one up for me, to my design.
There are certain advantages to this marriage thing.
--RC
This one never posted last month for some reason.
On Thu, 24 Feb 2005 03:03:37 GMT, the inscrutable Rick Cook
<[email protected]> spake:
>John Grossbohlin wrote:
>> "Never Enough Money" <[email protected]> wrote in message
>> news:[email protected]...
>>
>>>There are lot of aprons to choose from -- $10 to $85.
>>>
>>>So is the Lie-Nielsen ($85) just a status symbol or is it worth $85?
>>>
>>>http://www.lie-nielsen.com/tool.html?id=APR
>>>
>> Being leather it would put up with a fair amount of abrasion compared to the
>> typical cotton apron... and gain character with use!
>
>Leather is better for a shop apron -- but that much better?
This one is no status symbol, but it works just great and is
a damn sight cheaper. I'm happy with my 91% cheaper HF apron.
http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=45193
Avoid their fire-retardant canvas apron, though. I pulled one out of
its bag last week and nearly went into respiratory arrest from the
really HEAVY chemical smell. Whew!
At $85, you're likely paying for "gilded" LN logo stitching, a bit
better quality leather, and probably a more comfy apron with the
cross-hung style. But at 10x the price? Pass. (Though it is purty.)
--
Remember: Every silver lining has a cloud.
----
http://diversify.com Comprehensive Website Development
On Thu, 24 Feb 2005 18:22:13 -0600, the inscrutable "Jeff P."
<[email protected]> spake:
>Well, it's nice and all but it doesn't have a pocket for a shop pencil.
REAL masons jam it into their pec.
;)
---
- Sarcasm is just one more service we offer. -
http://diversify.com Web Applications
It was somewhere outside Barstow when Nate Perkins
<[email protected]> wrote:
>but I'm not sure why leather would be desirable for the rest of us.
Heavy and soft, so it drapes well. A "flappy" apron is a horrible
thing.
A very cheap leather apron is a welder's apron in pale grey chrome
leather (jackets too). They're hideous leather, but they are very
cheap.
My "good" apron is £20 ($40) of lovely soft suede bought at a
re-enactor fair and an evening's work on trimming it with pockets and
strings. Shame to wear it in the workshop really, but it's a great
"shopkeeper" apron on craft stalls.
--
Smert' spamionam
In article <[email protected]>,
"Never Enough Money" <[email protected]> wrote:
> There are lot of aprons to choose from -- $10 to $85.
>
> So is the Lie-Nielsen ($85) just a status symbol or is it worth $85?
>
> http://www.lie-nielsen.com/tool.html?id=APR
>
Leather aprons can be a man's best friend...not to mention Jim & Twins'
best friend as well.
I had a pilot tip come off a single flute plunge routerbit once...it
didn't hit me, but it left a nice dented mark on a metal tool box.
I did walk kinda crosslegged the rest of day thinking of what could have
happened.
Now, when I use one of these http://tinyurl.com/3wh3c big router bits, I
can only shudder to think what could happen if I did NOT wear a leather
apron.
I bought mine at a woodshow..around 40 dollars IIRC. Pretty cheap peace
of mind. I'd buy a kevlar version if such thing was to be had for a
reasonable amount of money.
0¿0
Rob
John Grossbohlin wrote:
> "Never Enough Money" <[email protected]> wrote in message
> news:[email protected]...
>
>>There are lot of aprons to choose from -- $10 to $85.
>>
>>So is the Lie-Nielsen ($85) just a status symbol or is it worth $85?
>>
>>http://www.lie-nielsen.com/tool.html?id=APR
>>
>
>
> Being leather it would put up with a fair amount of abrasion compared to the
> typical cotton apron... and gain character with use!
>
> John
>
>
Leather is better for a shop apron -- but that much better?
--RC
Ahh, that's not router table, that's just a cabinet that I use to store
finishing supplies and the blue thing is a filter covering a 1/4hp explosion
proof fan.
--
Jeff P.
Check out my woodshop at: www.sawdustcentral.com
*What was the best thing before sliced bread?
*How do they get a deer to cross at the yellow road sign?
*Why is there an expiration on sour cream? It's already sour isn't it?
*Why do kamikaze pilots wear helmets?
"Never Enough Money" <[email protected]> wrote in message
news:[email protected]...
> No. I meand the thing with the blue bottom in image 5 (of 5).
>
Larry Jaques wrote:
> On Tue, 01 Mar 2005 21:23:12 GMT, the inscrutable Badger
> <[email protected]> spake:
>
>>I like casio too, last one lasted over 25 years, including a trip
>>through a roof and a fall of 18 feet, with me attached, into hard-core
>>with little more than a scratch on the glass and a dent in the rim (I
>>was knocked out, broke my sturnum, and the damage to my left knee still
>>causes problems, the inch thick 8x4 sheet of ply that followed me
>>through missed!). My Christmas present Timex lasted 7 weeks before the
>>winder (adjuster) spindle broke....
>
>
> Me? I'm harder on watches than my body. I use stairs and ladders
> exclusively, thanks. Ouch! Your story hurts just to READ!
Indeed, the left knee has caused much pain since, including lower back,
due to the growth within the knee causing lengthening of the leg by
3/8", enough to throw out the pelvis. I count myself lucky, the same day
30 miles away someone fell half the height and was killed outright!
It was somewhere outside Barstow when Joe Wells
<[email protected]> wrote:
>Status symbol, feh.
If you just want an apron as a status symbol, try this
http://www.phoenixmasonry.org/masonicmuseum/masonic_apron_of_alf_t_ringling.htm
(Interesting little story actually)
In article <[email protected]>,
Never Enough Money <[email protected]> wrote:
>There are lot of aprons to choose from -- $10 to $85.
>
>So is the Lie-Nielsen ($85) just a status symbol or is it worth $85?
>
>http://www.lie-nielsen.com/tool.html?id=APR
>
10 is about twice what I'd be willing to spend on a shop apron.
http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=43636
~
--
Larry Wasserman Baltimore, Maryland
[email protected]
On Wed, 23 Feb 2005 23:34:14 -0500, "leonard" <[email protected]>
wrote:
> I like the one my wife made, it's kevlar with some type of soft coating
>that is light seems to be able to take the shop.She's a rocket scientist so
>who knows were she got the materials.
>
>len
>>
>
That is one of the most amusing (in a good way) anecdotes I've ever read.
On a number of levels. Thanks. -- Igor
This reminds me of the people who drive around for years with the dealer's
license plate holders on their car. The first thing I do is get rid of
those.
"John" <[email protected]> wrote in message
news:[email protected]...
> Actually, I expect companies to PAY ME for doing their advertising. I
> don't wear ballcaps with tool maker's names/logos on them, don't wear
> shirts wtih advertising on them either. They want ME to wear THEIR
> advertising, then at least they can GIVE the shirt/hat/whatever to me
> for FREE
>
> John
>
> On 28 Feb 2005 18:46:29 -0800, "Never Enough Money"
> <[email protected]> wrote:
>
> >Speaking of Lie-Nielsen cache, the LN apron has "Lie-Nileson" embossed
> >on the chest. I don't care who you are, you must admit that's cool.
>
Andy Dingley wrote:
> If you just want an apron as a status symbol, try this
> http://www.phoenixmasonry.org/masonicmuseum/masonic_apron_of_alf_t_ringling.htm
>
> (Interesting little story actually)
>
Hummm, got me dads old Rose Croix pinny locked away, it cost him £600
back in the 80s, he bought it just before they decided to wear the sash
only due to the cost of the aprons (minimum £250 due to the amount of
hand stitching), his was done with gold, rather than gold coloured
thread....Always wanted the best me dad GRHS.
Niel.
On Wed, 23 Feb 2005 18:12:06 -0800, Never Enough Money wrote:
> There are lot of aprons to choose from -- $10 to $85.
>
> So is the Lie-Nielsen ($85) just a status symbol or is it worth $85?
>
> http://www.lie-nielsen.com/tool.html?id=APR
Status symbol, feh. If you aren't wearing this apron, you aren't wearing
the right apron: http://owwm.com/Gear/Aprons.asp . Now *that's* a status
symbol.
And to further shill for OWWM, go through owwm.com when ordering from
Amazon. It won't change the price that you pay, but they get a commission:
http://owwm.com/Books/Specials.asp
--
Joe Wells
Larry Jaques wrote:
> On Tue, 01 Mar 2005 21:23:12 GMT, the inscrutable Badger
> <[email protected]> spake:
>
>> Larry Jaques wrote:
>>
>>> Now where in HELL can I buy a nice, discreet Casio watch
>>> with NO bold and colorful printing smeared all over it? I
>>> like Casio's countdown timers and alarms far better than
>>> Timex.
>
> Me? I'm harder on watches than my body. I use stairs and
> ladders exclusively, thanks. Ouch! Your story hurts just to
> READ!
>
> I usually damage the lens before 3 years are up. Finding a
> nice plain watch nowadays is nearly impossible. Rats!
Back in the days when I was /really/ rough on watches - and had
managed to destroy five watches (a casio, a TI, a Bulova, a
Timex, and another that I can't remember) in a single month - I
went to a little jewelery store in Fayetteville, NC (Hatchers
Jewelery?) and told the owner that I wanted a watch that'd take a
/real/ lickin' and keep on tickin'.
He said he had just the watch. A bit pricey (almost $300!), but
carried an unconditional guarantee. I gave him half of that and
told him that I'd be back next payday with the other half to pick
up the watch. He surprised me by telling me to put the watch on
and that he expected to see me on payday...
It's on my wrist now. Since then it's survived horrific
ill-treatment - everything from really lousy parachute landings
to salt water sailing and diving to years of EMF in a lab - and I
don't think I've ever not worn it in the shop. I did once manage
to shred a stainless band; but that accident didn't damage the
case. With a "tune up" every ten or twelve years, it's stayed
accurate to within a second or two a day.
The manufacturer's current offerings have become IMHO /too/
pricey; but it might be worth looking for a /used/ plain vanilla
Rolex. It'll probably outlast the wearer.
...Oh yes, for anyone wondering - I did go back the next payday
with the other half of the payment.
--
Morris Dovey
DeSoto Solar
DeSoto, Iowa USA
http://www.iedu.com/DeSoto/solar.html
It was somewhere outside Barstow when
[email protected] wrote:
>Did someone say leather apron? Here's mine, I challenge you to beat the
>price!
Split leather though - tends to catch on things, because the surface
is so fibrous.
Actually, I expect companies to PAY ME for doing their advertising. I
don't wear ballcaps with tool maker's names/logos on them, don't wear
shirts wtih advertising on them either. They want ME to wear THEIR
advertising, then at least they can GIVE the shirt/hat/whatever to me
for FREE
John
On 28 Feb 2005 18:46:29 -0800, "Never Enough Money"
<[email protected]> wrote:
>Speaking of Lie-Nielsen cache, the LN apron has "Lie-Nileson" embossed
>on the chest. I don't care who you are, you must admit that's cool.
On Tue, 01 Mar 2005 21:23:12 GMT, the inscrutable Badger
<[email protected]> spake:
>
>
>Larry Jaques wrote:
>> Now where in HELL can I buy a nice, discreet Casio watch with NO bold
>> and colorful printing smeared all over it? I like Casio's countdown
>> timers and alarms far better than Timex.
>
>I like casio too, last one lasted over 25 years, including a trip
>through a roof and a fall of 18 feet, with me attached, into hard-core
>with little more than a scratch on the glass and a dent in the rim (I
>was knocked out, broke my sturnum, and the damage to my left knee still
>causes problems, the inch thick 8x4 sheet of ply that followed me
>through missed!). My Christmas present Timex lasted 7 weeks before the
>winder (adjuster) spindle broke....
Me? I'm harder on watches than my body. I use stairs and ladders
exclusively, thanks. Ouch! Your story hurts just to READ!
I usually damage the lens before 3 years are up. Finding a nice
plain watch nowadays is nearly impossible. Rats!
Maybe I'll write to Casio and say "_Enough_ with the text, just
give me a plain watch. I don't need to know it's WATERPROOF TO
300 FEET, SHOCKPROOF TO 50Gs, ALARM, CHRONO, TIMER and all that
other stuff which should be found in the manual (and/or on the bezel),
NOT on the face of the watch."
--
Remember: Every silver lining has a cloud.
----
http://diversify.com Comprehensive Website Development
On Mon, 28 Feb 2005 21:53:39 -0600, the inscrutable John
<[email protected]> spake:
>Actually, I expect companies to PAY ME for doing their advertising. I
>don't wear ballcaps with tool maker's names/logos on them, don't wear
>shirts wtih advertising on them either. They want ME to wear THEIR
>advertising, then at least they can GIVE the shirt/hat/whatever to me
>for FREE
Agreed, wholeheartedly. Then again, we're not caught up in the status
symbol frenzy of.
Now where in HELL can I buy a nice, discreet Casio watch with NO bold
and colorful printing smeared all over it? I like Casio's countdown
timers and alarms far better than Timex.
--
Remember: Every silver lining has a cloud.
----
http://diversify.com Comprehensive Website Development
he told you. Read it again.
"Dave O'Heare" <oheareATmagmaDOTca> wrote in message
news:[email protected]...
>
> "Morris Dovey" <[email protected]> wrote in message
> news:[email protected]...
>
> > I
> > went to a little jewelery store in Fayetteville, NC (Hatchers
> > Jewelery?) and told the owner that I wanted a watch that'd take a
> > /real/ lickin' and keep on tickin'.
> >
> > He said he had just the watch. A bit pricey (almost $300!), but
> > carried an unconditional guarantee. I gave him half of that and
> > told him that I'd be back next payday with the other half to pick
> > up the watch. He surprised me by telling me to put the watch on
> > and that he expected to see me on payday...
> >
> > It's on my wrist now. Since then it's survived horrific
> > ill-treatment - everything from really lousy parachute landings
> > to salt water sailing and diving to years of EMF in a lab - and I
> > don't think I've ever not worn it in the shop. I did once manage
> > to shred a stainless band; but that accident didn't damage the
> > case. With a "tune up" every ten or twelve years, it's stayed
> > accurate to within a second or two a day.
> >
> > The manufacturer's current offerings have become IMHO /too/
> > pricey; but it might be worth looking for a /used/ plain vanilla
> > Rolex. It'll probably outlast the wearer.
> >
> > ...Oh yes, for anyone wondering - I did go back the next payday
> > with the other half of the payment.
>
> So, what kind of watch was it? You make a brand name suggestion, was that
> what you bought?
>
> Dave O'H
> oheareATmagmaDOTca
>
>