As the directions state, you will always have to adjust your settings for
individual bit differences. I have used spirals from the beginning, with a
set of setup marks stored with each.
"Myxylplyk" <[email protected]> wrote in message
news:[email protected]...
>
> "Ace" <[email protected]> wrote in message
news:k72Qb.106196$nt4.387438@attbi_s51...
> > What about using a spiral bit if I can find the right size instead of a
> > straight bit?
> > Thanks
> >
> >
> As long as the cutting diameter is the same as the Leigh specs..use what
you want.
> If it's not you can use it anyway, but you'll have to play around a lot
more with the
> settings
> the first time you use it.
>
> Myx
>
>
Shear cutting. Less chatter and smoother edges.
"Ken Lamb" <[email protected]> wrote in message
news:[email protected]...
>
> "George" <[email protected]> wrote in message
> news:[email protected]...
> > As the directions state, you will always have to adjust your settings
for
> > individual bit differences. I have used spirals from the beginning,
with
> a
> > set of setup marks stored with each.
>
> What are the advantages of a spiral bit over a straight bit in solid stock
> material?
> Serious question.
> Regards,
> Ken
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.564 / Virus Database: 356 - Release Date: 1/19/2004
>
>
"Ace" <[email protected]> wrote in message news:k72Qb.106196$nt4.387438@attbi_s51...
> What about using a spiral bit if I can find the right size instead of a
> straight bit?
> Thanks
>
>
As long as the cutting diameter is the same as the Leigh specs..use what you want.
If it's not you can use it anyway, but you'll have to play around a lot more with the
settings
the first time you use it.
Myx
"George" <[email protected]> wrote in message
news:[email protected]...
> As the directions state, you will always have to adjust your settings for
> individual bit differences. I have used spirals from the beginning, with
a
> set of setup marks stored with each.
What are the advantages of a spiral bit over a straight bit in solid stock
material?
Serious question.
Regards,
Ken
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.564 / Virus Database: 356 - Release Date: 1/19/2004