In refinishing a huge quartersawn oak and ply bookcase for the local library
(gratis, but fun none the less) I came up with one plywood side slightly
lighter and yellower than the rest of the cabinet. In order to get even
stain, I had given a shellac wash to the cabinet, which made addtional stain
difficult.
A quick coat of Polyshades (polyurethane finish with some colorant added in)
on just the lighter side did the trick nicely; easy to control the
additional color, and a first coat of finish to boot. I had never tried
this before (not a good finisher yet) but it has earned a place in the bag
of tricks. And you see any runs that will develop immediately -- you would
have to be blind to miss them
Matthew
For the "right color" it's tough because of it's color range, but I did get
used to the Cherry! But you have to give up some of the depth of the wood!
I made some cabinet doors just to test stains and colors, I used a Poly
shade over a Red Oak and over a Golden Oak, even over a white pine. You can
do some really interesting things with both!
"Matthew Eash" <[email protected]> wrote in message
news:[email protected]...
> In refinishing a huge quartersawn oak and ply bookcase for the local
library
> (gratis, but fun none the less) I came up with one plywood side slightly
> lighter and yellower than the rest of the cabinet. In order to get even
> stain, I had given a shellac wash to the cabinet, which made addtional
stain
> difficult.
>
> A quick coat of Polyshades (polyurethane finish with some colorant added
in)
> on just the lighter side did the trick nicely; easy to control the
> additional color, and a first coat of finish to boot. I had never tried
> this before (not a good finisher yet) but it has earned a place in the bag
> of tricks. And you see any runs that will develop immediately -- you
would
> have to be blind to miss them
>
> Matthew
>
>