Rl

Rob

31/12/2004 12:40 AM

antique wood finish HELP needed

Last spring we purchased a Gothic revival cabinet, beautifully carved walnut est age at turn of century from Belgium. It has a
dark shellac? finish that in the last few weeks has started to disappear in spots and in several spots it has turned into a
silver metalflake looking finish and actually bled from above to form a horizontal 'run' in the finish below it. It is so strange, I
have never seen anything like it! I checked the internet for finish problems and found no help there, I am praying one of you
may have an answer as this old dark finish is turning grayer at a rampant pace. I can
furnish pictures if necessary. One other thing.... I have not oiled or touched the original finish in any way, as we want this to
look very old with its nuances- but we didn't expect it to turn gray and lose the finish. 3 days ago I applied mineral oil to a
side panel, it did not help. I applied orange glow to another panel, it also did not help. Help!

Robert


This topic has 1 replies

AD

Andy Dingley

in reply to Rob on 31/12/2004 12:40 AM

06/01/2005 1:25 AM

On Fri, 31 Dec 2004 00:40:52 GMT, Rob <[email protected]> wrote:

>Last spring we purchased a Gothic revival cabinet, beautifully carved walnut est age at turn of century from Belgium. It has a
>dark shellac? finish

Are you in Belgium, or was this imported to the USA ? It would be a
rare piece that was imported with its original finish untouched, so it
could have anything on it now.

Whereabouts are you ? How cold/damp/dry is your winter? What
conditions is the piece kept in?

I'm still having a little trouble reconciling "Gothic revival",
"walnut" and "finish", but I guess that's me being Anglo-centric and
thinking too much of Pugin.

>I can furnish pictures if necessary.

Can't comment much without them. Either put them on the web, post
them to news:alt.binaries.pictures.woodworking or mail some to me and
I can post them there for all to see.

>but we didn't expect it to turn gray and lose the finish.

As a very wild guess, it's a new finish applied before sale and it
either doesn't like the old finish beneath, or it's having a hard time
with your local climate.

--
Smert' spamionam


You’ve reached the end of replies