Turned out pretty well for a first try. Wheels are spruce and douglas
fir, with ash hubs, rest is poplar, axles are black gas pipe, box is 4
feet long. Up close there's a lot of room for improvement, but from 10
feet away it looks pretty good IMO.
<http://www.flickr.com/photos/39383723@N00/4964837813/>
Thanks for all the help and advice.
I like it. Neat project and good job.
I'd like to see details of the front axle pivot mechanism. I built a
cart, about 4' wide X 8' long, with a wooden pivot mechanism for a
single front wheel, with a (pull) handle like a child's wagon (toy).
Turned out pretty good, but the cart wasn't for weighted loads... it
was for potted plants to be rolled into the garage. Made it about 10
yrs ago and still in use. All cypress.
I'm not sure how a pivot might be made for an axle. Always thought
I'd may make another cart, some day, but with a front axle as you
have, there.
Sonny
"J. Clarke" wrote:
> Turned out pretty well for a first try. Wheels are spruce and
> douglas fir, with ash hubs, rest is poplar, axles are black gas
> pipe, box is 4 feet long. Up close there's a lot of room for
> improvement, but from 10 feet away it looks pretty good IMO.
-------------------------------
If that were a boat, it would be "Fair" from 10 ft.
Looks like it was a fun project.
How are you going to finish it?
Will it be kept outside or under cover?
Lew
"J. Clarke" <[email protected]> wrote in message
news:[email protected]...
> Turned out pretty well for a first try. Wheels are spruce and douglas
> fir, with ash hubs, rest is poplar, axles are black gas pipe, box is 4
> feet long. Up close there's a lot of room for improvement, but from 10
> feet away it looks pretty good IMO.
>
> <http://www.flickr.com/photos/39383723@N00/4964837813/>
>
> Thanks for all the help and advice.
Hey don't leave us hanging.
Details man!! details!
What is this a model of? Any special historical or personal significance?
Whacha gonna use it for?
Is it usable? Can you put kids in it and pull it around?
Etc., etc....
In article <[email protected]>, [email protected]
says...
>
> Turned out pretty well for a first try. Wheels are spruce and douglas
> fir, with ash hubs, rest is poplar, axles are black gas pipe, box is 4
> feet long. Up close there's a lot of room for improvement, but from 10
> feet away it looks pretty good IMO.
>
> <http://www.flickr.com/photos/39383723@N00/4964837813/>
>
> Thanks for all the help and advice.
It looks great. What are you going to use it for?
s
"J. Clarke" <[email protected]> wrote in message
news:[email protected]...
> Turned out pretty well for a first try. Wheels are spruce and douglas
> fir, with ash hubs, rest is poplar, axles are black gas pipe, box is 4
> feet long. Up close there's a lot of room for improvement, but from 10
> feet away it looks pretty good IMO.
>
> <http://www.flickr.com/photos/39383723@N00/4964837813/>
>
> Thanks for all the help and advice.
Looks nice. How about showing some of the wheel detail?
On Sep 6, 5:29=A0pm, "J. Clarke" <[email protected]> wrote:
> Turned out pretty well for a first try. =A0Wheels are spruce and douglas
> fir, with ash hubs, rest is poplar, axles are black gas pipe, box is 4
> feet long. =A0Up close there's a lot of room for improvement, but from 10
> feet away it looks pretty good IMO.
>
> <http://www.flickr.com/photos/39383723@N00/4964837813/>
>
> Thanks for all the help and advice.
Looks really nice and looks like it was a lot of fun to build.
On 9/6/2010 6:49 PM, Lew Hodgett wrote:
> "J. Clarke" wrote:
>
>> Turned out pretty well for a first try. Wheels are spruce and
>> douglas fir, with ash hubs, rest is poplar, axles are black gas
>> pipe, box is 4 feet long. Up close there's a lot of room for
>> improvement, but from 10 feet away it looks pretty good IMO.
> -------------------------------
> If that were a boat, it would be "Fair" from 10 ft.
>
> Looks like it was a fun project.
>
> How are you going to finish it?
The fellow I made it for is going to decide that.
> Will it be kept outside or under cover?
He's planning on keeping it outside.
Next one is for me--gonna be painted I think.
On 9/6/2010 6:29 PM, sam wrote:
> In article<[email protected]>, [email protected]
> says...
>>
>> Turned out pretty well for a first try. Wheels are spruce and douglas
>> fir, with ash hubs, rest is poplar, axles are black gas pipe, box is 4
>> feet long. Up close there's a lot of room for improvement, but from 10
>> feet away it looks pretty good IMO.
>>
>> <http://www.flickr.com/photos/39383723@N00/4964837813/>
>>
>> Thanks for all the help and advice.
>
> It looks great. What are you going to use it for?
It's going to be a lawn ornament for a friend of mine--he asked me if I
could make such a thing if he paid for the materials, I told him I'd
give it a shot.
On 9/6/2010 6:57 PM, Lee Michaels wrote:
>
>
> "J. Clarke" <[email protected]> wrote in message
> news:[email protected]...
>> Turned out pretty well for a first try. Wheels are spruce and douglas
>> fir, with ash hubs, rest is poplar, axles are black gas pipe, box is 4
>> feet long. Up close there's a lot of room for improvement, but from 10
>> feet away it looks pretty good IMO.
>>
>> <http://www.flickr.com/photos/39383723@N00/4964837813/>
>>
>> Thanks for all the help and advice.
>
> Hey don't leave us hanging.
>
> Details man!! details!
>
> What is this a model of? Any special historical or personal significance?
>
> Whacha gonna use it for?
>
> Is it usable? Can you put kids in it and pull it around?
>
> Etc., etc....
It's not really a model of anything--somebody wanted an "Amish farm
wagon" for a lawn decoration and offered to pay for the materials, I
googled it, showed him a picture,
<http://www.mymodelships.com/product_images/pid_3615-Amish-Old-Fashioned-Buckboard-Wagon-Large-10.jpg>,
he said "that's it", and I went from there.
The guy who paid for the materials gets it for a lawn ornament--he's
going to finish it to suit himself. He's talking about selling them
for that purpose, so I may end up with a production line going. Gonna
start another one for me--it's just such a neat thing that if all it
does is sit there and look pretty that's enough.
It's usable in the sense that it will roll with my 250 pounds in it.
Don't know how durable it will prove to be though--to really hold up it
needs shrunk-on steel tires which I never got around to fitting. Right
now the wheels are tight on the axles, they should loosen up though.
Kids could pull each other around in it but I suspect that the wheels
would come apart fairly quickly--on the other hand Titebond III may be
tougher than I expect.
I'm thinking about drawing up a set of plans and instructions for making it.
On 9/6/2010 9:34 PM, Ed Pawlowski wrote:
>
> "J. Clarke" <[email protected]> wrote in message
> news:[email protected]...
>> Turned out pretty well for a first try. Wheels are spruce and douglas
>> fir, with ash hubs, rest is poplar, axles are black gas pipe, box is 4
>> feet long. Up close there's a lot of room for improvement, but from 10
>> feet away it looks pretty good IMO.
>>
>> <http://www.flickr.com/photos/39383723@N00/4964837813/>
>>
>> Thanks for all the help and advice.
>
> Looks nice. How about showing some of the wheel detail?
I've added the first attempt at a wheel
<http://www.flickr.com/photos/39383723@N00/sets/72157624896749102/>, and
the separate components. Note that the rim section ("felloe" or
"fellow") is from the larger wheel while the spoke is from the
smaller--the wedges are the same on both.
The center gets bored out after assembly and fitted with a turned hub--I
don't have an extra of that.
"J. Clarke" <[email protected]> wrote in message
news:[email protected]...
> Turned out pretty well for a first try. Wheels are spruce and douglas
> fir, with ash hubs, rest is poplar, axles are black gas pipe, box is 4
> feet long. Up close there's a lot of room for improvement, but from 10
> feet away it looks pretty good IMO.
>
> <http://www.flickr.com/photos/39383723@N00/4964837813/>
>
> Thanks for all the help and advice.
That wheel design is pretty slick! Going to shrink metal tyres on the next
one?
On 9/6/2010 10:24 PM, Sonny wrote:
> I like it. Neat project and good job.
>
> I'd like to see details of the front axle pivot mechanism. I built a
> cart, about 4' wide X 8' long, with a wooden pivot mechanism for a
> single front wheel, with a (pull) handle like a child's wagon (toy).
> Turned out pretty good, but the cart wasn't for weighted loads... it
> was for potted plants to be rolled into the garage. Made it about 10
> yrs ago and still in use. All cypress.
>
> I'm not sure how a pivot might be made for an axle.
Real simple. 7/8 inch hole 2-1/2 inches deep in both pieces, and a 5
inch length of 1/2 inch gas pipe.
> Always thought
> I'd may make another cart, some day, but with a front axle as you
> have, there.
>
> Sonny