I've neglected my tools for two months now. I haven't been in the shop
in that long, I admit.
But I wasn't prepared for what I saw on my tablesaw today.
A two inch thick layer of sawdust on the cast iron top, with a leaking
bottle of bleach sitting on the sawdust.
Apparently my ex wife (as if I needed another reason to be angry at her)
allowed a neighbor to use the saw some time ago while I was out of town.
He didn't clean off the sawdust. Why the leaky bleach bottle was placed
on top I'll never know.
Bleach is a powerful oxidizer, and it took 15 minutes with a nylon scrub
pad on the ROS just to get the caked, rusty sawdust off.
But now I've got these huge black stains on the top that will probably
never come off.
Grumble, grumble...
On Jun 23, 6:38=A0pm, Woodie <[email protected]> wrote:
> I've neglected my tools for two months now. I haven't been in the shop
> in that long, I admit.
> But I wasn't prepared for what I saw on my tablesaw today.
> A two inch thick layer of sawdust on the cast iron top, with a leaking
> bottle of bleach sitting on the sawdust.
>
> Apparently my ex wife (as if I needed another reason to be angry at her)
> allowed a neighbor to use the saw some time ago while I was out of town.
> He didn't clean off the sawdust. Why the leaky bleach bottle was placed
> on top I'll never know.
>
> Bleach is a powerful oxidizer, and it took 15 minutes with a nylon scrub
> pad on the ROS just to get the caked, rusty sawdust off.
>
> But now I've got these huge black stains on the top that will probably
> never come off.
>
> Grumble, grumble...
Yes, they will come off. Rub it with wood.
John Martin
On Jun 23, 5:38 pm, Woodie <[email protected]> wrote:
> But now I've got these huge black stains on the top that will probably
> never come off.
You can do some good work with the appropriate metal polishing
compounds and a good buffer. It won't take the pits out (obviously)
but you might be able to make it shine better than new with some
patience.
> Grumble, grumble...
Awwww.... quit yer bitchin'. You did say EX, right? That should make
you happy.
Robert
I've heard enough horror stories about ex's that I feel I should share my
buddy's plan with the brotherhood. He says that if she get's out of line once
too often he'll buy her a new anchor chain and take her fishing! (grin)
--
Message posted via CraftKB.com
http://www.craftkb.com/Uwe/Forums.aspx/woodworking/200806/1
Woodie wrote:
> [email protected] wrote:
>> On Jun 23, 5:38 pm, Woodie <[email protected]> wrote:
>>
>>> But now I've got these huge black stains on the top that will probably
>>> never come off.
>>
>> You can do some good work with the appropriate metal polishing
>> compounds and a good buffer. It won't take the pits out (obviously)
>> but you might be able to make it shine better than new with some
>> patience.
>>
>> > Grumble, grumble...
>>
>> Awwww.... quit yer bitchin'. You did say EX, right? That should make
>> you happy.
>
> A buddy yesterday said (in front of his #2) "I'm on my second wife now,
> and she's SO much better than the first, I can't wait to meet the third!"
and he'll be gettin' outa the hospital soon, I expect...
Lew Hodgett wrote:
> Woodie wrote:
>
>
>> But now I've got these huge black stains on the top that will
>> probably
>> never come off.
>
> And how has that affected the saw's ability to make an accurate cut?
>
> Time for some WD40, 150 grit on a ROS, some paper towels, and oh yea,
> some elbow grease, followed by a wax job.
Yesterday it was RemOil and the nylon pad (couldn't find a can of WD40
in the whole house - how's that for neglect?)
I'll get to work it on it this eve with some sandpaper on the ROS.
> All this while humming, "Free again, ..................."
So far it's been grumbling "why that inconsiderate #@$*&!"
Humming may come later.
Woodie wrote:
> But now I've got these huge black stains on the top that will
> probably
> never come off.
And how has that affected the saw's ability to make an accurate cut?
Time for some WD40, 150 grit on a ROS, some paper towels, and oh yea,
some elbow grease, followed by a wax job.
All this while humming, "Free again, ..................."
Lew
On Mon, 23 Jun 2008 22:38:57 GMT, Woodie <[email protected]> wrote:
>I've neglected my tools for two months now. I haven't been in the shop
>in that long, I admit.
>But I wasn't prepared for what I saw on my tablesaw today.
>A two inch thick layer of sawdust on the cast iron top, with a leaking
>bottle of bleach sitting on the sawdust.
>
>Apparently my ex wife (as if I needed another reason to be angry at her)
>allowed a neighbor to use the saw some time ago while I was out of town.
>He didn't clean off the sawdust. Why the leaky bleach bottle was placed
>on top I'll never know.
>
>Bleach is a powerful oxidizer, and it took 15 minutes with a nylon scrub
>pad on the ROS just to get the caked, rusty sawdust off.
>
>But now I've got these huge black stains on the top that will probably
>never come off.
>
>Grumble, grumble...
Sad story. A leaking bottle of bleach can do a lot of unexpected
damage. I let everyone in the house know my shop is off-limits to
everyone.
[email protected] wrote:
> On Jun 23, 5:38 pm, Woodie <[email protected]> wrote:
>
>> But now I've got these huge black stains on the top that will probably
>> never come off.
>
> You can do some good work with the appropriate metal polishing
> compounds and a good buffer. It won't take the pits out (obviously)
> but you might be able to make it shine better than new with some
> patience.
>
> > Grumble, grumble...
>
> Awwww.... quit yer bitchin'. You did say EX, right? That should make
> you happy.
A buddy yesterday said (in front of his #2) "I'm on my second wife now,
and she's SO much better than the first, I can't wait to meet the third!"