I built a ipe deck and rolled on messmers UV for hardwoods. It's about
2 weeks later now, and it LOOKS great, but it seems to scratch VERY
easily. If I drag a 5 lb deck chair across it, it appears to be
scraping the messmers finish off. Do I need to apply something else
over Messmers? Or does it take longer than a couple weeks to dry? Im
upset my brand new perfect deck is starting to look like crap, I have
to go do all this touchup work now.. Any comments/suggestions?
Thanks,
it stratches that easily ?
steppy the gamer
Games I play:
http://www.gamestotal.com
http://uc.gamestotal.com
http://gc.gamestotal.com
http://gc.gamestotal.com/manual/
http://gc.gamestotal.com/hef.cfm
http://uc.gamestotal.com/freegames/
http://uc.gamestotal.com/manual/
http://uc.gamestotal.com/hef.cfm
http://3700ad.gamestotal.com
http://aw.gamestotal.com
http://www.stephenyong.com
[email protected] wrote:
> I built a ipe deck and rolled on messmers UV for hardwoods. It's about
> 2 weeks later now, and it LOOKS great, but it seems to scratch VERY
> easily. If I drag a 5 lb deck chair across it, it appears to be
> scraping the messmers finish off. Do I need to apply something else
> over Messmers? Or does it take longer than a couple weeks to dry? Im
> upset my brand new perfect deck is starting to look like crap, I have
> to go do all this touchup work now.. Any comments/suggestions?
>
> Thanks,
Ipe is a very oily wood that does not take finishes well.The wood is also
know as ironwood(very hard)and repels water very well.You may have just
scratched your finish.Just put some rubber feet on your chairs and hope for
the best until the finish wares out(the Ipe should last for the rest of your
lifetime depending on were you live)
<[email protected]> wrote in message
news:[email protected]...
>I built a ipe deck and rolled on messmers UV for hardwoods. It's about
> 2 weeks later now, and it LOOKS great, but it seems to scratch VERY
> easily. If I drag a 5 lb deck chair across it, it appears to be
> scraping the messmers finish off. Do I need to apply something else
> over Messmers? Or does it take longer than a couple weeks to dry? Im
> upset my brand new perfect deck is starting to look like crap, I have
> to go do all this touchup work now.. Any comments/suggestions?
I'm not familiar with Messmers, but have used other similar stains. It
soaks into the surface a bit to protect the wood from water and UV. It is
still possible to scratch through it dragging a chair. Maybe you need
better glides on the chairs too.
"Edwin Pawlowski" <[email protected]> wrote in message
news:[email protected]...
>
> I'm not familiar with Messmers, but have used other similar stains. It
> soaks into the surface a bit to protect the wood from water and UV. It is
> still possible to scratch through it dragging a chair. Maybe you need
> better glides on the chairs too.
>
There is a good chance the Ipe is harder than the finish that he applied.