Seems like Suffolk Machinery sells tham and I know Laguna sells them.
Sticker shock is tough.
On Sat, 7 Feb 2004 07:17:09 -0800, "Mike Brannon"
<[email protected]> wrote:
>Newbie here, looking for carbide bandsaw blades. Anyone know of a good
>source of quality blades online or otherwise? Operating a Jet 14" with
>931/2" blades.. thanks in advance
>
I called all the local dealers and saw blade/sharpening places till I found
one that carried Lenox.
Luv these blades.
mark
"Mike Brannon" <[email protected]> wrote in message
news:Sj7Vb.23673$tP1.5568@fed1read07...
> Newbie here, looking for carbide bandsaw blades. Anyone know of a good
> source of quality blades online or otherwise? Operating a Jet 14" with
> 931/2" blades.. thanks in advance
>
>
Be aware that Lenox carbide blades on small bandsaws often have a high
failure rate OR early failure due to the flexing from the small
bandsaw wheels. I know that MiniMax does NOT recommend the Lenox
Carbide blades on saws smaller than 20in
John
On Sat, 07 Feb 2004 19:13:51 GMT, "markm"
<[email protected]> wrote:
>I called all the local dealers and saw blade/sharpening places till I found
>one that carried Lenox.
>Luv these blades.
>
>mark
>"Mike Brannon" <[email protected]> wrote in message
>news:Sj7Vb.23673$tP1.5568@fed1read07...
>> Newbie here, looking for carbide bandsaw blades. Anyone know of a good
>> source of quality blades online or otherwise? Operating a Jet 14" with
>> 931/2" blades.. thanks in advance
>>
>>
>
http://www.suffolkmachinery.com/
Phone:800-234-7297
Fax:631-289-7156
Hope this helps.
Layne
ps, usual disclaimers apply.
On Sat, 7 Feb 2004 07:17:09 -0800, "Mike Brannon"
<[email protected]> wrote:
>Newbie here, looking for carbide bandsaw blades. Anyone know of a good
>source of quality blades online or otherwise? Operating a Jet 14" with
>931/2" blades.. thanks in advance
>
On Sun, 08 Feb 2004 11:43:24 -0600, John Crea <[email protected]> wrote:
>Be aware that Lenox carbide blades on small bandsaws often have a high
>failure rate OR early failure due to the flexing from the small
>bandsaw wheels. I know that MiniMax does NOT recommend the Lenox
>Carbide blades on saws smaller than 20in
>
this is a real fact. wish it was not so.
--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.