On Aug 30, 10:02 am, dpb <[email protected]> wrote:
> [email protected] wrote:
> > I have to build 32 drawers 3 feet wide by 3 feet deep by 13 inch tall
> > draws. I started looking for heavy duty (250 lb+) full extension
> > under mount slides and was shocked to find the cheapest I could find
> > would run about $1500.
> > Anyone have any suggestions on a brand or an alternative?
>
> That's only about $47/pair for a 250# full extension -- what do expect????
I interpreted it to mean $1500 per drawer, which sounded completely
ridiculous, but complaining about $50/drawer for this application also
seemed unbelievable. But standard undermounts are 100 lb rated and
don't come in the length he needs, nobody has 3 ft deep kitchen
cabinets. And the load rating is given for 18", Go longer than that
and it goes down. So I thought he was getting a quote for something
custom made.
On Aug 30, 4:59 am, [email protected] wrote:
> I have to build 32 drawers 3 feet wide by 3 feet deep by 13 inch tall
> draws. I started looking for heavy duty (250 lb+) full extension
> under mount slides and was shocked to find the cheapest I could find
> would run about $1500.
> Anyone have any suggestions on a brand or an alternative?
>
> TIA
make wooden slides w/ballbearings....
On Aug 30, 4:59 am, [email protected] wrote:
> I have to build 32 drawers 3 feet wide by 3 feet deep by 13 inch tall
> draws. I started looking for heavy duty (250 lb+) full extension
> under mount slides and was shocked to find the cheapest I could find
> would run about $1500.
> Anyone have any suggestions on a brand or an alternative?
I don't know about true undermount, but you could use two pairs of
Accuride 9301 flat mounted for the low low price of $400 per drawer.
Or sacrifice another 2-1/4" of drawer height and undermount one pair
vertically. Or forget about undermounting.
"dpb" <[email protected]> wrote in message
> That's only about $47/pair for a 250# full extension -- what do expect????
How about some 400lb slides? The 36" ones are only $114 a pair. :)
http://www.leevalley.com/hardware/page.aspx?c=1&p=50505&cat=3,43614,43616&ap=1
[email protected] wrote:
> I have to build 32 drawers 3 feet wide by 3 feet deep by 13 inch tall
> draws. I started looking for heavy duty (250 lb+) full extension
> under mount slides and was shocked to find the cheapest I could find
> would run about $1500.
> Anyone have any suggestions on a brand or an alternative?
That's only about $47/pair for a 250# full extension -- what do expect????
--