"Rob Kubo" <[email protected]> wrote in message
news:[email protected]...
>I have a Craftsman Router, Model 315.175110. Naturally it is out of
>warranty. The Depth Adjustment Ring is "frozen" and I can not raise or
>lower my cutters. Any suggestions on how I can free up the ring and use
>the router as it should be? Thanks, Rob K.
I had the same router and same problem. I was able to free it up by blowing
compressed air around the threads and then spraying WD-40 into the threads.
That worked a couple of times. The last time I used a strap wrench and a
bench vise on it. I gave up and bought a PC 7518 and have never had any
problems with it.
--
Al Reid