Mc

"Mickey"

24/12/2004 2:41 PM

Delta's new model of #50-760 dust collector

I have checked the specification of 50-760 on the Web of Delta.
Then it says the Chip Bag Area is 2.4CFT(67 liter). Is it right?
If so,the chip bag area of 50-760 is smaller than the one of
AP400,which is lower grade of dust collector.
In the case of a 50-850, it is 6.3CFT.
What do you think of that? Is it mis-keyed?

Thanks in advance,

Mickey


This topic has 1 replies

JB

Jim Behning

in reply to "Mickey" on 24/12/2004 2:41 PM

25/12/2004 3:01 PM

If you use a cyclone pre-separator, the volume is not all that
critical. Many people report excellent large chip/dust prefilter using
the cyclone/trash can kits. Reports of emptying the bags out once a
year while emptying out the trash can many times which may be less
messy.


"Mickey" <[email protected]> wrote:

>I have checked the specification of 50-760 on the Web of Delta.
>Then it says the Chip Bag Area is 2.4CFT(67 liter). Is it right?
>If so,the chip bag area of 50-760 is smaller than the one of
>AP400,which is lower grade of dust collector.
>In the case of a 50-850, it is 6.3CFT.
>What do you think of that? Is it mis-keyed?
>
>Thanks in advance,
>
>Mickey


You’ve reached the end of replies