my friend just got a new Sears circular saw a few days ago and we're
trying to figure out if it has bad bearings or gears.....when you let go
of the trigger and it's slowing down then it runs very rough. (this is
with the blade spinning freely, not cutting wood)
at full speed it runs pretty much ok and will probably cut wood,
although a very small amount of roughness can be felt. it's a $59
model with ball bearings.
we compared with my two Skil saws and they run perfectly smooth while
running at full speed and while slowing down to a stop...not a hint of
roughness at any speed. (One is a worm drive, the other is a cheap $38
model)
he's trying to decide whether to return the saw to the store but he
doesn't want to be unreasonable if this is normal behavior for a new
saw, and maybe after it's used for a few weeks it will smooth out...or
on the other hand maybe it's defective and should be returned right away
just wondering if anybody else had ever noticed a problem like this...
if anybody knows if this is normal for a new saw...or maybe it's not a
problem at all and the saw can just stay that way...but from looking at
other posts I gather that Sears saws in general have lots of trouble.
Thanks
It will not get better. Take it back and try the saw in the
store.
(top posted for your convenience)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Keep the whole world singing . . . .
DanG (remove the sevens)
[email protected]
"Bart" <[email protected]> wrote in message
news:[email protected]...
> my friend just got a new Sears circular saw a few days ago and
> we're trying to figure out if it has bad bearings or
> gears.....when you let go of the trigger and it's slowing down
> then it runs very rough. (this is with the blade spinning
> freely, not cutting wood)
>
> at full speed it runs pretty much ok and will probably cut wood,
> although a very small amount of roughness can be felt. it's a
> $59 model with ball bearings.
>
> we compared with my two Skil saws and they run perfectly smooth
> while running at full speed and while slowing down to a
> stop...not a hint of roughness at any speed. (One is a worm
> drive, the other is a cheap $38 model)
>
> he's trying to decide whether to return the saw to the store but
> he doesn't want to be unreasonable if this is normal behavior
> for a new saw, and maybe after it's used for a few weeks it will
> smooth out...or on the other hand maybe it's defective and
> should be returned right away
>
> just wondering if anybody else had ever noticed a problem like
> this... if anybody knows if this is normal for a new saw...or
> maybe it's not a problem at all and the saw can just stay that
> way...but from looking at other posts I gather that Sears saws
> in general have lots of trouble.
>
> Thanks
"Bart" <[email protected]> wrote in message
news:[email protected]...
> my friend just got a new Sears circular saw a few days ago and we're
> trying to figure out if it has bad bearings or gears.....when you let go
> of the trigger and it's slowing down then it runs very rough. (this is
> with the blade spinning freely, not cutting wood)
>
<snip>
>
> he's trying to decide whether to return the saw to the store but he
> doesn't want to be unreasonable if this is normal behavior for a new saw,
> and maybe after it's used for a few weeks it will smooth out...or on the
> other hand maybe it's defective and should be returned right away
>
Maybe, just maybe, it could be the blade. Take blade off and try it, or try
another blade. If not, then definitely return it to the store, and make sure
you try the new one in the store before you accept it.
--
Nahmie
The greatest headaches are those we cause ourselves.
On Sat, 23 Apr 2005 03:40:56 -0700, Bart <[email protected]> wrote:
>my friend just got a new Sears circular saw a few days ago and we're
>trying to figure out if it has bad bearings or gears.....when you let go
>of the trigger and it's slowing down then it runs very rough. (this is
>with the blade spinning freely, not cutting wood)
I have a Sears table saw that eats a set of bearings about every 6
mos. I've ended up replacing them with American made bearings and so
far so good. Fafnir is the brand I am using.
..Joe L