finish- final coat of ???

"Rob Stokes" <[email protected]> wrote in message
news:uyffd.919$E93.526@clgrps12...
> I'd suggest Johnson's paste wax, but they don't make it anymore and it's
> getting hard to come by.

<troll alert on> <g>
SH

"David" <[email protected]> wrote in message
news:[email protected]...
> Not true. Lowe's is just one of the chains that currently carry tons of
> SC Johnson's Paste Wax.

Hook, line, sinker, fishing pole....
SH

>
> David
>
> Rob Stokes wrote:
>> I'd suggest Johnson's paste wax, but they don't make it anymore and it's
>> getting hard to come by.

Hi David,
I think Rob meant to say is that it is not sold in Canada anymore. JG

David wrote:

> Not true. Lowe's is just one of the chains that currently carry tons of
> SC Johnson's Paste Wax.
>
> David
>
> Rob Stokes wrote:
> > I'd suggest Johnson's paste wax, but they don't make it anymore and it's
> > getting hard to come by.

Not true. Lowe's is just one of the chains that currently carry tons of
SC Johnson's Paste Wax.

David

Rob Stokes wrote:
> I'd suggest Johnson's paste wax, but they don't make it anymore and it's
> getting hard to come by.

Aha. Got it.

David

JGS wrote:
> Hi David,
> I think Rob meant to say is that it is not sold in Canada anymore. JG
>
> David wrote:
>
>
>>Not true. Lowe's is just one of the chains that currently carry tons of
>>SC Johnson's Paste Wax.
>>
>>David
>>
>>Rob Stokes wrote:
>>
>>>I'd suggest Johnson's paste wax, but they don't make it anymore and it's
>>>getting hard to come by.
>
>

"Rob Stokes" <[email protected]> wrote in message
>
> After you've down this, let if harden fpor a couple of hours and then hit
it
> again with the buffing towel...
> try it. you'll like it.

Agreed. Easy to use, quick and satisfying results. I regularly use it on
wooden projects in my apartment where the odour of paint thinners or stain
might be offensive.

David <[email protected]> wrote in news:[email protected]:

> Not true. Lowe's is just one of the chains that currently carry tons of
> SC Johnson's Paste Wax.
>
> David
>
> Rob Stokes wrote:
>> I'd suggest Johnson's paste wax, but they don't make it anymore and it's
>> getting hard to come by.
>

Fwiw, if you can't find Johnsons I've had good luck with Butcher's Bowling
Alley Wax, same process as the others.
Good luck,
Adam

However, MinWax furniture polish is rapidly gaining
> my respect as a worthy alternative. Like Johnson's, it's a paste wax in a
> can and like Johnson's, it works best if you put it on, wait for a few
> seconds and wipe it off again.

I'll second MinWax paste for durability and luster. A few years ago we
owned a college rental that housed our son and a tenant. The living room
carpets were needing to be replaced but when we pulled the carpet we found
60+ year old oak under it. They were dulled and carpet imprinted but in
fairly good shape. After cleaning we applied two coats of MinWax, buffing
after each. The $35 finish (cleaner, MinWax, buffer rental) looked great.
Still looked good when we sold the house about 1-1/2 years later.

With this in mind I have topped the finish of several projects with 1 or 2
coats of the wax and it adds luster and some durability. If you pick up
minor scuffs, you can usually fix with a light recoat. I don't think I
would recoat often though.

I'd suggest Johnson's paste wax, but they don't make it anymore and it's
getting hard to come by. However, MinWax furniture polish is rapidly gaining
my respect as a worthy alternative. Like Johnson's, it's a paste wax in a
can and like Johnson's, it works best if you put it on, wait for a few
seconds and wipe it off again. Repeat as required and buff with a old piece
of terry towel. Don't let the wax dry....it causes swirls marks and is a
pain to buff out. If this happens, apply more wax over the dries stuff, rub
hard to re-constitute the dried stuff and then buff off right away.

After you've down this, let if harden fpor a couple of hours and then hit it
again with the buffing towel...

try it. you'll like it.

Good luck
Rob

--


http://www.robswoodworking.com

"Steve Verity" <[email protected]> wrote in message
news:[email protected]...
> I have a project that is build of stained poplar, covered with a
> couple coats of wipe on poly. I'm looking for a wax, or other final
> coating that can be polished or buffed to a highly glossy, smooth
> finish.
>
> Any suggestions welcome-
> Thanks,
> Steve V.