I'm working on a biofuels research project at the univ. of Okla.
School of Chemical Engineering. We'd like to obtain some oak sawdust
to try our process on. We need very fine sawdust, not chips or
"flour". Does anyone know where I can get this, or is willing to make
some for us? We need about 10-15 gallons worth to start with (we'll
need to sieve what we get to sort out the particle size we need). If
things go well, we might need this much every week or two.
Failing to be able to buy the sawdust, what would be the best way to
make our own? The first batch I made, I "ground up" a 1X4 on my
contractor's saw using a dado blade. The wood, being oak, didn't like
this, and tried to kick back every few inches of feed.
Cabinet shops will have too much of varied types of wood and at least
half plywood which has glues, resins, etc.
I would get a North Carolina phone book and look for furniture
manufacturers specializing in oak furniture. In the states that is the
region with a concentration of furniture manufacturing left, such as
it is.They should have large enough operations that they will have
already isolated dust collection systems only connected to solid oak
production. At least for spans of time.
Any of the smaller manufactures will love another source of revenue.
On Nov 16, 4:57=A0pm, lektric dan <[email protected]> wrote:
> I'm working on a biofuels research project at the univ. of Okla.
> School of Chemical Engineering. =A0We'd like to obtain some oak sawdust
> to try our process on. =A0We need very fine sawdust, not chips or
> "flour". =A0
By "flour," do you mean it has to be finer than what is produced by
sanding?
While watching a PBS show Hometime episode 'Stone Cottage - Millwork'
Dean Johnson, the host, visited a Crown Molding company. The owner
stated they sell their sawdust for cow bedding. Something to keep in mind.
Mike in Ohio
On 11/16/2010 04:57 PM, lektric dan wrote:
> I'm working on a biofuels research project at the univ. of Okla.
> School of Chemical Engineering. We'd like to obtain some oak sawdust
> to try our process on. We need very fine sawdust, not chips or
> "flour". Does anyone know where I can get this, or is willing to make
> some for us? We need about 10-15 gallons worth to start with (we'll
> need to sieve what we get to sort out the particle size we need). If
> things go well, we might need this much every week or two.
>
> Failing to be able to buy the sawdust, what would be the best way to
> make our own? The first batch I made, I "ground up" a 1X4 on my
> contractor's saw using a dado blade. The wood, being oak, didn't like
> this, and tried to kick back every few inches of feed.
"lektric dan" <[email protected]> wrote in message
news:[email protected]...
> I'm working on a biofuels research project at the univ. of Okla.
> School of Chemical Engineering. We'd like to obtain some oak sawdust
> to try our process on. We need very fine sawdust, not chips or
> "flour". Does anyone know where I can get this, or is willing to make
> some for us? We need about 10-15 gallons worth to start with (we'll
> need to sieve what we get to sort out the particle size we need). If
> things go well, we might need this much every week or two.
>
> Failing to be able to buy the sawdust, what would be the best way to
> make our own? The first batch I made, I "ground up" a 1X4 on my
> contractor's saw using a dado blade. The wood, being oak, didn't like
> this, and tried to kick back every few inches of feed.
The local cabinet shops here (El Paso, TX) produce tons of the stuff.
Max
"lektric dan" wrote:
> I'm working on a biofuels research project at the univ. of Okla.
> School of Chemical Engineering. We'd like to obtain some oak
> sawdust
> to try our process on. We need very fine sawdust, not chips or
> "flour". Does anyone know where I can get this, or is willing to
> make
> some for us? We need about 10-15 gallons worth to start with (we'll
> need to sieve what we get to sort out the particle size we need).
> If
> things go well, we might need this much every week or two.
---------------------------------
Got any Amish cabinet shops in your area?
They tend ton specialize in white oak.
Lew
On 2010-11-16 18:19:06 -0500, "SonomaProducts.com" <[email protected]> said:
> I would get a North Carolina phone book and look for furniture
> manufacturers specializing in oak furniture. In the states that is the
> region with a concentration of furniture manufacturing left, such as
> it is.
Yeah -- such as it is. Thomasville Furniture, certainly one of the
best known names in the North Carolina furniture industtry, now runs
just one plant. And it only does minor re-work (touch-up) on shipping
damage to the China-manufactured stuff they now sell. While they still
have staff with the ability to repair real damage, the bean-counters
forbid it. Those pieces go in the dumper.
That's pretty indicative of the whole T-ville-Greensboro-High Point
area, I'm told. Probably hasn't helped the barbeque industry in the
area, either... Said to be the area's best*, Lexington Bar-B-Que is
just across the highway from Lexington Furniture.
*Never was able to get over there while they were open, but I'll keep trying!
On Nov 17, 5:57=A0am, lektric dan <[email protected]> wrote:
> I'm working on a biofuels research project at the univ. of Okla.
> School of Chemical Engineering. =A0We'd like to obtain some oak sawdust
> to try our process on. =A0We need very fine sawdust, not chips or
> "flour". =A0Does anyone know where I can get this, or is willing to make
> some for us? =A0We need about 10-15 gallons worth to start with (we'll
> need to sieve what we get to sort out the particle size we need). =A0If
> things go well, we might need this much every week or two.
>
> Failing to be able to buy the sawdust, what would be the best way to
> make our own? =A0The first batch I made, I "ground up" a 1X4 on my
> contractor's saw using a dado blade. =A0The wood, being oak, didn't like
> this, and tried to kick back every few inches of feed.
local cabinet shop works with oak will help you
On Nov 16, 4:57=A0pm, lektric dan <[email protected]> wrote:
> I'm working on a biofuels research project at the univ. of Okla.
> School of Chemical Engineering. =A0We'd like to obtain some oak sawdust
> to try our process on. =A0We need very fine sawdust, not chips or
> "flour". =A0Does anyone know where I can get this, or is willing to make
> some for us? =A0We need about 10-15 gallons worth to start with (we'll
> need to sieve what we get to sort out the particle size we need). =A0If
> things go well, we might need this much every week or two.
>
> Failing to be able to buy the sawdust, what would be the best way to
> make our own? =A0The first batch I made, I "ground up" a 1X4 on my
> contractor's saw using a dado blade. =A0The wood, being oak, didn't like
> this, and tried to kick back every few inches of feed.
I hope you're working on cyclonically-suspended wood dust in an
oxygenated atmosphere ignited piezo-electrically with maybe concentric
liquid oxygen jets. I love when shit blows up. Post a video.
R
Church pews are usually made of white oak. Here's a list of
manufacturers:
http://www.arcat.com/divs/sec/sec12670.shtml
Here's a search for Oklahoma
http://www.google.com/search?client=safari&rls=en&q=pew+manufacturers&ie=UTF-8&oe=UTF-8#sclient=psy&hl=en&safe=off&client=safari&rls=en&q=oklahoma+pew+manufacturers&aq=f&aqi=&aql=f&oq=&gs_rfai=&pbx=1&fp=3c39b015884aae73
On Nov 22, 11:54=A0am, RicodJour <[email protected]> wrote:
> On Nov 16, 4:57=A0pm, lektric dan <[email protected]> wrote:
>
>
> I hope you're working on cyclonically-suspended wood dust in an
> oxygenated atmosphere ignited piezo-electrically with maybe concentric
> liquid oxygen jets. =A0I love when shit blows up. =A0Post a video.
>
Check the Mythbuster's web site. They might have a place for you!
RonB
On Nov 16, 3:57=A0pm, lektric dan <[email protected]> wrote:
> I'm working on a biofuels research project at the univ. of Okla.
> School of Chemical Engineering. =A0We'd like to obtain some oak sawdust
> to try our process on. =A0We need very fine sawdust, not chips or
> "flour". =A0Does anyone know where I can get this, or is willing to make
> some for us? =A0We need about 10-15 gallons worth to start with (we'll
> need to sieve what we get to sort out the particle size we need). =A0If
> things go well, we might need this much every week or two.
>
> Failing to be able to buy the sawdust, what would be the best way to
> make our own? =A0The first batch I made, I "ground up" a 1X4 on my
> contractor's saw using a dado blade. =A0The wood, being oak, didn't like
> this, and tried to kick back every few inches of feed.
I live in Southeast Kansas, not too far away. In addition to the
suggestions you already have received, I would try sawmills, hardwood
mills and pallet manufacturers. We have a sawmill/pallet manufacturer
in our home town (St. Paul) who has large mounds of sawdust and chips
next to their shop. Another sawmill on the edge of town has some
visible piles.
There are quite a few mills in the SW Missouri area too. I buy
hardwood from a mill near Pierce City. He doesn't cut all of his
stock, but it comes from somewhere.
RonB
"SonomaProducts.com" <[email protected]> writes:
>Cabinet shops will have too much of varied types of wood and at least
>half plywood which has glues, resins, etc.
>
>I would get a North Carolina phone book and look for furniture
>manufacturers specializing in oak furniture. In the states that is the
>region with a concentration of furniture manufacturing left, such as
>it is.They should have large enough operations that they will have
>already isolated dust collection systems only connected to solid oak
>production. At least for spans of time.
>
>Any of the smaller manufactures will love another source of revenue.
I'd check with a local sawmill. They'll have plenty.
scott
On 11/16/10 3:57 PM, lektric dan wrote:
> Failing to be able to buy the sawdust, what would be the best way to
> make our own? The first batch I made, I "ground up" a 1X4 on my
> contractor's saw using a dado blade. The wood, being oak, didn't
> like this, and tried to kick back every few inches of feed.
I suspect it had more to do with operation than species.
If the dado set gave you the size you needed, I'd stick with it.
Install some hold-downs & feather-boards and develop a safe feed rate
help with the kickback.
I'm not sure if this would get the size dust you require, but a large,
high power, belt sander with a 60 grit belt would take down oak about as
fast as you could feed it.
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply
On 11/16/2010 3:57 PM, lektric dan wrote:
> I'm working on a biofuels research project at the univ. of Okla.
> School of Chemical Engineering. We'd like to obtain some oak sawdust
> to try our process on. We need very fine sawdust, not chips or
> "flour". Does anyone know where I can get this, or is willing to make
> some for us? We need about 10-15 gallons worth to start with (we'll
> need to sieve what we get to sort out the particle size we need). If
> things go well, we might need this much every week or two.
>
> Failing to be able to buy the sawdust, what would be the best way to
> make our own? The first batch I made, I "ground up" a 1X4 on my
> contractor's saw using a dado blade. The wood, being oak, didn't like
> this, and tried to kick back every few inches of feed.
a planer set on slow feed and very light cut would probably give you
what you need.
--
Steve Barker
remove the "not" from my address to email