Hey folks. I have my dewalt 733 planer that may need some new blades
soon. Granted, they were replaced recently, but they seem to dull
down so gosh darn quick. I saw infinity tools has planer blades that
are carbide tipped and had some blades that would fit a dw735 planer.
Anyone know if the 735 and 733 blades are the same blades? It would
be nice to get some carbides for the 733....
Thanks.
jason
On May 11, 1:48 pm, jason <[email protected]> wrote:
> Hey folks. I have my dewalt 733 planer that may need some new blades
> soon. Granted, they were replaced recently, but they seem to dull
> down so gosh darn quick. I saw infinity tools has planer blades that
> are carbide tipped and had some blades that would fit a dw735 planer.
> Anyone know if the 735 and 733 blades are the same blades? It would
> be nice to get some carbides for the 733....
> Thanks.
> jason
Instead of Infinity try Global Tooling: http://globaltooling.bizhosting.com/index.html
They are a lot cheaper than Infinity and very helpful. I got my
carbide knives for 185.00 from global vrs. 259.00 from infinity. bc
In article <Uo31i.14$He1.3@trndny04>, Nova <[email protected]> wrote:
>No they are not the same knives. The 735 uses three disposable knives.
> The 733 has two resharpenable knives.
The knives in the 735 aren't completely disposable. As long as you use a light
touch, removing no more metal than is absolutely necessary to restore a razor
edge, they can be resharpened -- perhaps re-honed is a better term -- at least
four times. I think I have only one more honing left on mine before I'll
finally have to discard them.
--
Regards,
Doug Miller (alphageek at milmac dot com)
It's time to throw all their damned tea in the harbor again.
jason wrote:
> Hey folks. I have my dewalt 733 planer that may need some new blades
> soon. Granted, they were replaced recently, but they seem to dull
> down so gosh darn quick. I saw infinity tools has planer blades that
> are carbide tipped and had some blades that would fit a dw735 planer.
> Anyone know if the 735 and 733 blades are the same blades? It would
> be nice to get some carbides for the 733....
> Thanks.
> jason
>
No they are not the same knives. The 735 uses three disposable knives.
The 733 has two resharpenable knives.
http://www.toolbarn.com/product/dewalt/DW7332/
http://www.toolbarn.com/product/dewalt/DW7332/
--
Jack Novak
Buffalo, NY - USA
[email protected]
Nova wrote:
> jason wrote:
>
>> Hey folks. I have my dewalt 733 planer that may need some new blades
>> soon. Granted, they were replaced recently, but they seem to dull
>> down so gosh darn quick. I saw infinity tools has planer blades that
>> are carbide tipped and had some blades that would fit a dw735 planer.
>> Anyone know if the 735 and 733 blades are the same blades? It would
>> be nice to get some carbides for the 733....
>> Thanks.
>> jason
>>
>
> No they are not the same knives. The 735 uses three disposable knives.
> The 733 has two resharpenable knives.
>
> http://www.toolbarn.com/product/dewalt/DW7332/
>
> http://www.toolbarn.com/product/dewalt/DW7332/
>
Make that second link:
http://www.amazon.com/DEWALT-DW7352-Replaceable-Knives-13-Inch/dp/B0000CCXUB
--
Jack Novak
Buffalo, NY - USA
[email protected]