Hmm, I will have to try them again but 2 years ago they were high on
there prices and not very helpful. Mind you I only went there once
(that was enough) but I did not see any bargains.
Woodcraft also has a store on Glenwood in Raleigh. Between the 2
mentioned in the 1st reply and this one, you should be able to get a
deal. I bought mine from The Woodworking Store" (Klingspor) when they
were running a package deal. Call them up or look on line and see what
specials they are running.
BRuce (Benson)
[email protected] wrote:
> On Mon, 06 Oct 2003 12:31:05 GMT, "LoboMike" <[email protected]>
> wrote:
>
>
>>What are the best sources for a Unisaw (new or used) in NC, preferably in
>>the Piedmont?
>>
>>TIA
>
>
> try tarheel filing off highway 64 near the beltline in raleigh. you
> would have to get the number and call for directions but he sells high
> end tools at more reasonable prices than the local woodworking stores.
> skeez
--
---
BRuce
On Mon, 06 Oct 2003 12:31:05 GMT, "LoboMike" <[email protected]>
wrote:
>What are the best sources for a Unisaw (new or used) in NC, preferably in
>the Piedmont?
>
>TIA
try tarheel filing off highway 64 near the beltline in raleigh. you
would have to get the number and call for directions but he sells high
end tools at more reasonable prices than the local woodworking stores.
skeez
Good morning,
Try http://www.woodworkingshop.com/
They have stores in Hickory, Winston-Salem, Charlotte and Raleigh. I've only
been to the store in Winston-Salem, but they've several cabinet saws on the
floor for you to explore. I've seen sawdust on the floor from time to time,
so I know they power up some of the equipment. You'd have to ask though.
Another is Woodworkers Supply in Graham (east of Burlington on I-40) ...
http://www.woodworker.com/ though I've not been there yet.
Uncle Lucky (Lance ... [email protected] ) occasionally advertises used
Unisaws and other woodworking equipment ... he's in the Raleigh area. Do a
Google search (DAGS) on 'Uncle Lucky', or 'Raleigh' and 'Unisaw', after
selecting rec.woodworking as the group to search.
Where in the Triad are you?
Rick
(in Kernersville)
"LoboMike" <[email protected]> wrote in message
news:[email protected]...
> What are the best sources for a Unisaw (new or used) in NC, preferably in
> the Piedmont?
>
> TIA
> --
> LoboMike
>
> "Good judgment comes from experience, and a lotta that comes from bad
> judgment."
>
>