Idlehands <[email protected]> wrote:
> On 2017-05-02 10:04 AM, Leon wrote:
>> On 5/2/2017 6:58 AM, Gresston1 wrote:
>>> Tell me again the name of the carbide turning tool you like to use. I
>>> think I will try it.
>>> Thanks
>>
>>
>> http://www.easywoodtools.com/
>
> FYI, my Kaspersky refuse to allow me to this site,
>
> The requested URL cannot be provided
>
> Object URL:
>
> http://www.easywoodtools.com/
>
> Reason:
>
> The object is infected by HEUR:Trojan.Script.Generic
>
> --
>
>
I would say "you" have a problem with your virus protection program.
G Ross <[email protected]> wrote:
> Leon wrote:
>> On 5/2/2017 6:58 AM, Gresston1 wrote:
>>> Tell me again the name of the carbide turning tool you like to use. I
>>> think I will try it.
>>> Thanks
>>
>>
>> http://www.easywoodtools.com/
>>
> Thank you. I can only afford one right now, would the round or curved
> square be most useful?
>
I am not a turning guru. But these tools get the job done. IMHO the
round will allow more curves in your turnings. Curved straight for spindle
type turnings.
G Ross <[email protected]> wrote in news:[email protected]:
> Leon wrote:
>> On 5/2/2017 6:58 AM, Gresston1 wrote:
>>> Tell me again the name of the carbide turning tool you like to use.
I
>>> think I will try it.
>>> Thanks
>>
>>
>> http://www.easywoodtools.com/
>>
> Thank you. I can only afford one right now, would the round or curved
> square be most useful?
>
What do you like to turn most? The curved square might be good if you
like doing things with squareish edges, like straight sided bowls or
maybe lids. The round might be good if you do more spindle turning.
I found these guys, but haven't used their products at all:
http://eddiecastelin.com/combos_and_other_items
Might be a good alternative to Easy Wood Tools.
Puckdropper
--
http://www.puckdroppersplace.us/rec.woodworking
A mini archive of some of rec.woodworking's best and worst!
On 5/2/2017 8:47 PM, Leon wrote:
> G Ross <[email protected]> wrote:
>> Leon wrote:
>>> On 5/2/2017 6:58 AM, Gresston1 wrote:
>>>> Tell me again the name of the carbide turning tool you like to use. I
>>>> think I will try it.
>>>> Thanks
>>>
>>> http://www.easywoodtools.com/
>>>
>> Thank you. I can only afford one right now, would the round or curved
>> square be most useful?
>>
> I am not a turning guru. But these tools get the job done. IMHO the
> round will allow more curves in your turnings. Curved straight for spindle
> type turnings.
>
My first Easy Wood turning tool was one with the round tip (I turn
mostly pens and small objects like that). Still use it most of the
time, though I have since acquired a square-ended tip also. That one
seems to help when working on straight lines. Personally, I'd suggest
the round tip to start with.
HTH. Matt
DerbyDad03 <[email protected]> wrote:
> On Wednesday, May 3, 2017 at 10:58:16 AM UTC-4, Spalted Walt wrote:
> > DerbyDad03 <[email protected]> wrote:
> >
> > > Avast on my Home PC allows access. However, the site is blocked on my corporate PC.
> > > When sites are blocked we get a generic "corporate" page saying the site "has been identified as
> > > containing content that could pose a risk to the Firm and or may not comply with one or more
> > > of the Firm's policies." We never know if it's an virus issue or just something that our IT
> > > security team doesn't like.
> >
> > Does your "corporate PC" block Youtube and/or Facebook?
> > netstat shows connections to both with http://www.easywoodtools.com/
>
> Netstat is blocked. ;-)
netstat isn't a URL, it's a command line tool https://en.wikipedia.org/wiki/Netstat
Windows: Run > cmd
C:\>netstat -a
> Youtube is not blocked, but Facebook is, sort of. Facebook returns a totally different
> message.
Actually, when visiting: http://www.easywoodtools.com/
Two seperate Facebook domains are opened (via https):
facebook.com and fbcdn.net <https://en.wiki-domains.net/wiki/fbcdn.net>
What kind of denial msg do you get with: https://www.fbcdn.net
> Chrome: This site can't be reached, might be down or moved, etc.
> IE: This page can't be displayed, make sure the web address is correct, etc.
>
> IOW We get a "browser based" message as opposed to being re-directed to the
> corporate "website is blocked by firm" message page. I don't know why they handle
> Facebook (and Twitter) via the browsers.
>
> >
> > > I can access Rockler, Woodcraft, Lee Valley, etc.with no problem, so there is *something*
> > > going on with the easywoodtools site that raises a concern within our system and apparently
> > > with some AV programs/settings. It could be as simple as http vs. https.
> >
> > Rockler, Woodcraft, Lee Valley doesn't auto-connect w/Youtube or Facebook
>
> Perhaps it's the "auto-connect", something that I am not familiar with since I don't use
> Facebook.
Trust me, unless you're using a browser plugin such as NoScript (or
similar) to actively block, you "auto-connect" w/Facebook and/or a
hella lot more sites, whether intended or not, with most URLs nowadays.
> They all have links to Facebook on their pages. How is that different than the
> "auto-connect" you speak of?
Uh, because embedded links require 'clicking-on' before connecting
DerbyDad03 <[email protected]> wrote:
> Avast on my Home PC allows access. However, the site is blocked on my corporate PC.
> When sites are blocked we get a generic "corporate" page saying the site "has been identified as
> containing content that could pose a risk to the Firm and or may not comply with one or more
> of the Firm's policies." We never know if it's an virus issue or just something that our IT
> security team doesn't like.
Does your "corporate PC" block Youtube and/or Facebook?
netstat shows connections to both with http://www.easywoodtools.com/
> I can access Rockler, Woodcraft, Lee Valley, etc.with no problem, so there is *something*
> going on with the easywoodtools site that raises a concern within our system and apparently
> with some AV programs/settings. It could be as simple as http vs. https.
Rockler, Woodcraft, Lee Valley doesn't auto-connect w/Youtube or Facebook
On Wednesday, May 3, 2017 at 10:58:16 AM UTC-4, Spalted Walt wrote:
> DerbyDad03 <[email protected]> wrote:
>
> > Avast on my Home PC allows access. However, the site is blocked on my corporate PC.
> > When sites are blocked we get a generic "corporate" page saying the site "has been identified as
> > containing content that could pose a risk to the Firm and or may not comply with one or more
> > of the Firm's policies." We never know if it's an virus issue or just something that our IT
> > security team doesn't like.
>
> Does your "corporate PC" block Youtube and/or Facebook?
> netstat shows connections to both with http://www.easywoodtools.com/
Netstat is blocked. ;-)
Youtube is not blocked, but Facebook is, sort of. Facebook returns a totally different
message.
Chrome: This site can't be reached, might be down or moved, etc.
IE: This page can't be displayed, make sure the web address is correct, etc.
IOW We get a "browser based" message as opposed to being re-directed to the
corporate "website is blocked by firm" message page. I don't know why they handle
Facebook (and Twitter) via the browsers.
>
> > I can access Rockler, Woodcraft, Lee Valley, etc.with no problem, so there is *something*
> > going on with the easywoodtools site that raises a concern within our system and apparently
> > with some AV programs/settings. It could be as simple as http vs. https.
>
> Rockler, Woodcraft, Lee Valley doesn't auto-connect w/Youtube or Facebook
Perhaps it's the "auto-connect", something that I am not familiar with since I don't use
Facebook. They all have links to Facebook on their pages. How is that different than the
"auto-connect" you speak of?
On Wednesday, May 3, 2017 at 1:40:10 PM UTC-4, Spalted Walt wrote:
> DerbyDad03 <[email protected]> wrote:
>
> > On Wednesday, May 3, 2017 at 10:58:16 AM UTC-4, Spalted Walt wrote:
> > > DerbyDad03 <[email protected]> wrote:
> > >
> > > > Avast on my Home PC allows access. However, the site is blocked on my corporate PC.
> > > > When sites are blocked we get a generic "corporate" page saying the site "has been identified as
> > > > containing content that could pose a risk to the Firm and or may not comply with one or more
> > > > of the Firm's policies." We never know if it's an virus issue or just something that our IT
> > > > security team doesn't like.
> > >
> > > Does your "corporate PC" block Youtube and/or Facebook?
> > > netstat shows connections to both with http://www.easywoodtools.com/
> >
> > Netstat is blocked. ;-)
>
> netstat isn't a URL, it's a command line tool https://en.wikipedia.org/wiki/Netstat
> Windows: Run > cmd
> C:\>netstat -a
I know that netstat is a command line tool, but netstat.net is a URL. That
is blocked via the corporate "potential risk to the firm" page.
>
> > Youtube is not blocked, but Facebook is, sort of. Facebook returns a totally different
> > message.
>
> Actually, when visiting: http://www.easywoodtools.com/
> Two seperate Facebook domains are opened (via https):
> facebook.com and fbcdn.net <https://en.wiki-domains.net/wiki/fbcdn.net>
> What kind of denial msg do you get with: https://www.fbcdn.net
If I include the https:// I get the browser "page can't be reached" message.
Chrome adds ERR_TUNNEL_CONNECTION_FAILED for all denials (fbcdn, Facebook, Twitter)
If I just use www.fbcden.net I get the corporate "potential risk to the
firm" page.
(With Facebook and Twitter I get the browser msg regardless of whether I
use the https:// or not.)
>
> > Chrome: This site can't be reached, might be down or moved, etc.
> > IE: This page can't be displayed, make sure the web address is correct, etc.
> >
> > IOW We get a "browser based" message as opposed to being re-directed to the
> > corporate "website is blocked by firm" message page. I don't know why they handle
> > Facebook (and Twitter) via the browsers.
> >
> > >
> > > > I can access Rockler, Woodcraft, Lee Valley, etc.with no problem, so there is *something*
> > > > going on with the easywoodtools site that raises a concern within our system and apparently
> > > > with some AV programs/settings. It could be as simple as http vs. https.
> > >
> > > Rockler, Woodcraft, Lee Valley doesn't auto-connect w/Youtube or Facebook
> >
> > Perhaps it's the "auto-connect", something that I am not familiar with since I don't use
> > Facebook.
>
> Trust me, unless you're using a browser plugin such as NoScript (or
> similar) to actively block, you "auto-connect" w/Facebook and/or a
> hella lot more sites, whether intended or not, with most URLs nowadays.
>
> > They all have links to Facebook on their pages. How is that different than the
> > "auto-connect" you speak of?
>
> Uh, because embedded links require 'clicking-on' before connecting
Uh, yeah, that I know. The question is: What is happening when a site
"auto-connects" to Facebook? I don't see anything, do anything, have an
account, etc. So what happens with/during my connection?
On Tuesday, May 2, 2017 at 11:49:44 PM UTC-4, Leon wrote:
> Idlehands <[email protected]> wrote:
> > On 2017-05-02 10:04 AM, Leon wrote:
> >> On 5/2/2017 6:58 AM, Gresston1 wrote:
> >>> Tell me again the name of the carbide turning tool you like to use. I
> >>> think I will try it.
> >>> Thanks
> >>
> >>
> >> http://www.easywoodtools.com/
> >
> > FYI, my Kaspersky refuse to allow me to this site,
> >
> > The requested URL cannot be provided
> >
> > Object URL:
> >
> > http://www.easywoodtools.com/
> >
> > Reason:
> >
> > The object is infected by HEUR:Trojan.Script.Generic
> >
> > --
> >
> >
>
> I would say "you" have a problem with your virus protection program.
Avast on my Home PC allows access. However, the site is blocked on my corporate PC.
When sites are blocked we get a generic "corporate" page saying the site "has been identified as
containing content that could pose a risk to the Firm and or may not comply with one or more
of the Firm's policies." We never know if it's an virus issue or just something that our IT
security team doesn't like.
I can access Rockler, Woodcraft, Lee Valley, etc.with no problem, so there is *something*
going on with the easywoodtools site that raises a concern within our system and apparently
with some AV programs/settings. It could be as simple as http vs. https.
easywoodtools apparently does not use https.
On Tuesday, May 2, 2017 at 8:40:50 PM UTC-4, Idlehands wrote:
> On 2017-05-02 10:04 AM, Leon wrote:
> > On 5/2/2017 6:58 AM, Gresston1 wrote:
> >> Tell me again the name of the carbide turning tool you like to use. I
> >> think I will try it.
> >> Thanks
> >
> >
> > http://www.easywoodtools.com/
>
> FYI, my Kaspersky refuse to allow me to this site,
>
> The requested URL cannot be provided
>
> Object URL:
>
> http://www.easywoodtools.com/
>
> Reason:
>
> The object is infected by HEUR:Trojan.Script.Generic
>
> --
Interesting... I didn't have a problem, Idlehands. In fact, I saved the site for future reference, if I ever have the time to get my Lathe going. (Thanks Leon!)
I use Vipre for Internet protection. It's pretty sound, according to my IT guys.
Try opening a new browser and simply typing the site instead of connecting via link, maybe (?)
I don't pretend to be a computer guy, though!!
Sorry makes a tool with interchangeable heads. It accommodates square, dia=
mond and round carbide or steel blades. Because of the mechanics of the in=
terchangeable head you need to work a tad further from your piece. I have =
used this and dedicated carbide tools. While I prefer the dedicated tools,=
the three in one makes for an economical choice.
>>
>> http://www.easywoodtools.com/
>>
Here's the Lee Valley USA web page - for another reference
and you could perhaps save on shipping costs and/ or
you could save money if you have the "on sale" LV gift cards
from Cyber Monday ..
http://www.leevalley.com/us/Wood/page.aspx?p=66955&cat=1,330,49233&ap=1
John T.
On 2017-05-02 10:04 AM, Leon wrote:
> On 5/2/2017 6:58 AM, Gresston1 wrote:
>> Tell me again the name of the carbide turning tool you like to use. I
>> think I will try it.
>> Thanks
>
>
> http://www.easywoodtools.com/
FYI, my Kaspersky refuse to allow me to this site,
The requested URL cannot be provided
Object URL:
http://www.easywoodtools.com/
Reason:
The object is infected by HEUR:Trojan.Script.Generic
--
Gramps' shop wrote:
> Sorry makes a tool with interchangeable heads. It accommodates square, diamond and round carbide or steel blades. Because of the mechanics of the interchangeable head you need to work a tad further from your piece. I have used this and dedicated carbide tools. While I prefer the dedicated tools, the three in one makes for an economical choice.
>
Ordered one via Amazon from Hartville tools.
Thank you, Gramps!
--
GW Ross
On 5/2/2017 5:44 PM, G Ross wrote:
> Leon wrote:
>> On 5/2/2017 6:58 AM, Gresston1 wrote:
>>> Tell me again the name of the carbide turning tool you like to use. I
>>> think I will try it.
>>> Thanks
>>
>>
>> http://www.easywoodtools.com/
>>
> Thank you. I can only afford one right now, would the round or curved
> square be most useful?
>
Why not make your own?
I used a 4 sided carbide cutter insert that came with my planer from
Grizzly. Had some wrought iron railing laying around, hacked a short
piece off and ground a seat for the carbide insert. Drilled and tapped
a hole for the insert, turned a handle and wallah, a nice and easy
carbide lathe tool. Saved myself an easy $129 for about an hours (less)
of work. Works exactly as expected. Here's a pic if it:
http://jbstein.com/Flick/LtoolP1080208.JPG
Grizzly sells the cutters in packs of 10 for $37 and since they are 4
sided, should last your lifetime, and your kids and grandkids lifetime
as well:
http://www.grizzly.com/products/Indexable-Carbide-Inserts-Carbide-10-Pack/H7319?utm_campaign=zPage&utm_source=grizzly.com
You probably could buy just one for under $5.00. Other cutters in
different shapes can be bought all over the place, although probably
more money.
--
Jack
Add Life to your Days not Days to your Life.
http://jbstein.com
Jack wrote:
> On 5/2/2017 5:44 PM, G Ross wrote:
>> Leon wrote:
>>> On 5/2/2017 6:58 AM, Gresston1 wrote:
>>>> Tell me again the name of the carbide turning tool you like to use. I
>>>> think I will try it.
>>>> Thanks
>>>
>>>
>>> http://www.easywoodtools.com/
>>>
>> Thank you. I can only afford one right now, would the round or curved
>> square be most useful?
>>
> Why not make your own?
>
> I used a 4 sided carbide cutter insert that came with my planer from
> Grizzly. Had some wrought iron railing laying around, hacked a short
> piece off and ground a seat for the carbide insert. Drilled and tapped
> a hole for the insert, turned a handle and wallah, a nice and easy
> carbide lathe tool. Saved myself an easy $129 for about an hours (less)
> of work. Works exactly as expected. Here's a pic if it:
>
> http://jbstein.com/Flick/LtoolP1080208.JPG
>
> Grizzly sells the cutters in packs of 10 for $37 and since they are 4
> sided, should last your lifetime, and your kids and grandkids lifetime
> as well:
>
> http://www.grizzly.com/products/Indexable-Carbide-Inserts-Carbide-10-Pack/H7319?utm_campaign=zPage&utm_source=grizzly.com
>
> You probably could buy just one for under $5.00. Other cutters in
> different shapes can be bought all over the place, although probably
> more money.
>
Great Idea.
--
GW Ross
DerbyDad03 <[email protected]> writes:
>On Tuesday, May 2, 2017 at 11:49:44 PM UTC-4, Leon wrote:
>
>I can access Rockler, Woodcraft, Lee Valley, etc.with no problem, so there is *something*
>going on with the easywoodtools site that raises a concern within our system and apparently
>with some AV programs/settings. It could be as simple as http vs. https.
Or it could be that "easywoodtools" gets caught by an aggressive porn-site blocker :-)
DerbyDad03 <[email protected]> wrote:
> Uh, yeah, that I know. The question is: What is happening when a site
> "auto-connects" to Facebook?
Well, in the case of www.easywoodtools.com, not much really.
It appears to just offer up their Facebook 'Like' widget thingy which
is located just under '100% satisfaction guaranteed stamp' (on my PC)
> I don't see anything, do anything, have an
> account, etc. So what happens with/during my connection?
Decide for yourself. In FF or Chrome goto http://www.easywoodtools.com
, press Ctrl+U (view page source) scroll down to line 126, study
it closely, then post your findings.
Idlehands <[email protected]> wrote:
> On 2017-05-02 10:04 AM, Leon wrote:
> > http://www.easywoodtools.com/
>
> FYI, my Kaspersky refuse to allow me to this site,
>
> The requested URL cannot be provided
>
> Object URL:
>
> http://www.easywoodtools.com/
>
> Reason:
>
> The object is infected by HEUR:Trojan.Script.Generic
Kaspersky says the link is "safe according to the reputation data of Kaspersky VirusDesk"
https://virusdesk.kaspersky.com/
VirusTotal also says the link is clean:
https://www.virustotal.com/#url
On Tue, 2 May 2017 22:49:37 -0500, Leon <[email protected]> wrote:
>> The object is infected by HEUR:Trojan.Script.Generic
>I would say "you" have a problem with your virus protection program.
I received a similar error too.