Does anyone have a Bosch Colt router with the standard base?
I'm trying to find out the minimum distance from the edge of the
standard base to the center of the bit. In other words, how close to
the wall can I get with the standard base?
I went to the Bosch site and found a lot of info but couldn't find any
measurements as to the size of the base.
Thanks for any help,
Mike O.
On Thu, 23 Dec 2010 10:45:47 -0500, FrozenNorth
<[email protected]> wrote:
>On 12/23/10 12:00 AM, Steve Turner wrote:
>> On 12/22/2010 9:47 PM, -MIKE- wrote:
>>> On 12/22/10 9:28 PM, FrozenNorth wrote:
>>>
>>>> Just went and measured mine, two inches.
>>>>
>>>
>>> Oh Lord.
>>
>> You beat me to it. :-)
>>
>My router damnit.
>It was -7C when I posted that, I dare yours to be longer in those
>conditions. :-)
Thanks guys,
Mike...still laughing.
On 12/22/2010 9:04 PM, Mike O. wrote:
> Does anyone have a Bosch Colt router with the standard base?
> I'm trying to find out the minimum distance from the edge of the
> standard base to the center of the bit. In other words, how close to
> the wall can I get with the standard base?
>
> I went to the Bosch site and found a lot of info but couldn't find any
> measurements as to the size of the base.
It's 1 7/8" on three sides. If 1 3/4" will do the trick for your
application, I think that can be obtained by replacing the knurled
capped locking screw with a regular screw or bolt (I think it's a ¼x20)
Two inches more will make you a King
Two inches less will make you a Queen
Sparky 01
"Larry Blanchard" <[email protected]> wrote in message
news:[email protected]...
> On Thu, 23 Dec 2010 10:45:47 -0500, FrozenNorth wrote:
>
>> It was -7C when I posted that, I dare yours to be longer in those
>> conditions. :-)
>
> I can't even find mine in those conditions :-).
>
> --
> Intelligence is an experiment that failed - G. B. Shaw
On 12/22/10 10:04 PM, Mike O. wrote:
> Does anyone have a Bosch Colt router with the standard base?
> I'm trying to find out the minimum distance from the edge of the
> standard base to the center of the bit. In other words, how close to
> the wall can I get with the standard base?
>
> I went to the Bosch site and found a lot of info but couldn't find any
> measurements as to the size of the base.
>
> Thanks for any help,
>
Just went and measured mine, two inches.
--
Froz...
The system will be down for 10 days for preventive maintenance.
On 12/22/10 9:28 PM, FrozenNorth wrote:
> Just went and measured mine, two inches.
>
Oh Lord.
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply
On 12/23/10 12:00 AM, Steve Turner wrote:
> On 12/22/2010 9:47 PM, -MIKE- wrote:
>> On 12/22/10 9:28 PM, FrozenNorth wrote:
>>
>>> Just went and measured mine, two inches.
>>>
>>
>> Oh Lord.
>
> You beat me to it. :-)
>
My router damnit.
It was -7C when I posted that, I dare yours to be longer in those
conditions. :-)
--
Froz...
The system will be down for 10 days for preventive maintenance.
"Mike O." <[email protected]> wrote in message
news:[email protected]...
> Does anyone have a Bosch Colt router with the standard base?
> I'm trying to find out the minimum distance from the edge of the
> standard base to the center of the bit. In other words, how close to
> the wall can I get with the standard base?
>
> I went to the Bosch site and found a lot of info but couldn't find any
> measurements as to the size of the base.
>
> Thanks for any help,
>
> Mike O.
I like the feel of the Colt, but it's time-consuming (for me anyway) to get
the depth adjustment correct. The first thing that I did when I bought mine
was to order a round sub base from Rockler. It accepts Porter Cable
Template Guide Bushings and is easier for me to do certain operations much
easier than with a weird square base.
woodstuff