I recently asked for advice on some old power tools my Dad is only too
anxious to export from his garage to mine.
I took a couple that I had an immediate use for, but saw another not-
as-old tool that I don't even remember him owning. It looked sort of
like these:
http://www.milwaukeetool.com/ProductCategory.aspx?CategoryName=SC%3A+Polishers
... but seemed bigger, heavier and with more metal on it.
My question is, is this principally for polishing cars? Or could a
strong, fit person use it to buff a nice sheen onto a wood finish as
well?
In previous posts I have taken the precaution of describing my skill
level (weekend home handyman who occasionally builds something) in
order to prepare you for what will likely turn out to be my complete
ignorance of the topic at hand. I repeat that practice here.
Be gentle.
On Oct 15, 8:14=A0pm, "Lew Hodgett" <[email protected]> wrote:
> "Greg Guarino" wrote:
> > It looked sort of
> > like these:
>
> >http://www.milwaukeetool.com/ProductCategory.aspx?CategoryName=3DSC%3A+.=
..
>
> -----------------------------------------
> Get the model number.
>
> Milwaukee makes a 7"/9" sander/polisher, variable RPM (About 2,800 RPM
> max) that is a beautiful buffing tool especially when equipped with a
> 9" foam pad.
>
> They also make a 9" sander/grinder (About 5,000 RPM fixed) which is an
> absolute beast found in almost every welding shop.
>
> Definitely NOT a buffing tool.
>
> Both are great tools.
>
> Lew
To all: Thanks for the tips.
Now to clarify: I last saw the tool several weeks ago, and at that,
briefly, long before I looked for photos on the Milwaukee site. My
memory is not sharp enough to be able to say with any precision which
tool it is likely to be.
But I have now been duly chastened, and if it is a grinder, I'll
resist the urge to apply it to my Melody Maker, my L6-S and my
furniture.
But heck, I'm mostly a piano player anyway...
godsword wrote:
>
> I have one of those. Bought it more than 20 years ago out of Sears. It is
> a grinder, a sander, a buffer, and I would not ever try to use
> it on polishing wood. It would be just too aggressive. As a sander,
> on wood it would eat rings in what you were trying to sand. As a
> buffer, it would wear through your finish before you knew what was
> happening. It is basically for working on metal.
>
>
Well, I would not use my buffer as a grinder. I would though, quite
comfortably use it to polish wood. It is no more aggressive than the
compound you are using with it, and you can be as delicate with your touch
as you want to be. It's a tool to work on finishes - not a tool to work on
metal.
--
-Mike-
[email protected]
"Greg Guarino" wrote:
> It looked sort of
> like these:
>
> http://www.milwaukeetool.com/ProductCategory.aspx?CategoryName=SC%3A+Polishers
-----------------------------------------
Get the model number.
Milwaukee makes a 7"/9" sander/polisher, variable RPM (About 2,800 RPM
max) that is a beautiful buffing tool especially when equipped with a
9" foam pad.
They also make a 9" sander/grinder (About 5,000 RPM fixed) which is an
absolute beast found in almost every welding shop.
Definitely NOT a buffing tool.
Both are great tools.
Lew
Greg Guarino wrote:
> I recently asked for advice on some old power tools my Dad is only too
> anxious to export from his garage to mine.
>
> I took a couple that I had an immediate use for, but saw another not-
> as-old tool that I don't even remember him owning. It looked sort of
> like these:
>
> http://www.milwaukeetool.com/ProductCategory.aspx?CategoryName=SC%3A+Polishers
>
> ... but seemed bigger, heavier and with more metal on it.
>
> My question is, is this principally for polishing cars? Or could a
> strong, fit person use it to buff a nice sheen onto a wood finish as
> well?
>
Nice buffer. Similar to the one I own. If yours does not have a variable
speed capability, it can be retrofitted for about $20 (if I remember
correctly...) in parts, plus labor if you don't want to do it yourself. The
variable speed is quite handy in a buffer. To answer your question - it's
for polishing finishes. Can be used on cars, woodworking, etc. And yeah -
it can give you a work out if you're on it all day. If it came with wool
bonnets - chuck 'em. Go buy yourself some new foam pads. You can get them
at Harbor Freight and they're the same quality as what you'd buy in an
automotive paint supply. I've used mine to buff up guitar finishes on
guitars that I've simply cleaned up, and on guitars that I've painted. The
secret is to know how to use the tool. Keep it away from outside edges. It
will quickly reveal the mystery of what's really underneath the finish on
those edges...
--
-Mike-
[email protected]
On 10/15/2010 6:53 PM, Greg Guarino wrote:
> I recently asked for advice on some old power tools my Dad is only too
> anxious to export from his garage to mine.
>
> I took a couple that I had an immediate use for, but saw another not-
> as-old tool that I don't even remember him owning. It looked sort of
> like these:
>
> http://www.milwaukeetool.com/ProductCategory.aspx?CategoryName=SC%3A+Polishers
>
> ... but seemed bigger, heavier and with more metal on it.
>
> My question is, is this principally for polishing cars? Or could a
> strong, fit person use it to buff a nice sheen onto a wood finish as
> well?
>
> In previous posts I have taken the precaution of describing my skill
> level (weekend home handyman who occasionally builds something) in
> order to prepare you for what will likely turn out to be my complete
> ignorance of the topic at hand. I repeat that practice here.
>
> Be gentle.
>
Gentlemen, I do appreciate that what you have are Buffers. And I am
sure that they work just as you say that they do. I do not dispute that
fact.
However, If I have read the original post correctly, and I may not have,
he says that what he has looks something like the buffers that you
have, and his web link does show Buffers, But he also stated that what
he has is VERY OLD, being bigger and heavier than the ones on the
reference link. And that takes it out of the category of a Buffer and
puts it into the category of a Grinder.
Yes they did make both, and each for its own purpose. And while the
grinder could buff, that was only a secondary use. They not only would
take the rubber disk which normally held sandpaper, but also could use
grinding wheels which were rigid. At least mine could and can, and I
have used it that way many times. And yes they were very heavy. Those
old grinders had only one speed, and not at all like the variable speed
light duty buffers being sold in these last few years.
Now, if what he really has is a Buffer, as you believe that he has, then
your advice is right on. But if what he has is one of the old grinders,
then it is just too powerful to buff anything other than a car or metal.
He will have to determine which one he has. His Dad should be able to
shed some light on which machine that he had bought years ago. If not,
the manufacture should be able to tell by the model if he has a grinder
or a buffer.
Jack
On 10/15/2010 6:53 PM, Greg Guarino wrote:
> I recently asked for advice on some old power tools my Dad is only too
> anxious to export from his garage to mine.
>
> I took a couple that I had an immediate use for, but saw another not-
> as-old tool that I don't even remember him owning. It looked sort of
> like these:
>
> http://www.milwaukeetool.com/ProductCategory.aspx?CategoryName=SC%3A+Polishers
>
> ... but seemed bigger, heavier and with more metal on it.
>
> My question is, is this principally for polishing cars? Or could a
> strong, fit person use it to buff a nice sheen onto a wood finish as
> well?
>
> In previous posts I have taken the precaution of describing my skill
> level (weekend home handyman who occasionally builds something) in
> order to prepare you for what will likely turn out to be my complete
> ignorance of the topic at hand. I repeat that practice here.
>
> Be gentle.
>
I have one of those. Bought it more than 20 years ago out of Sears. It
is a grinder, a sander, a buffer, and I would not ever try to use it on
polishing wood. It would be just too aggressive. As a sander, on wood it
would eat rings in what you were trying to sand. As a buffer, it would
wear through your finish before you knew what was happening. It is
basically for working on metal.
Jack