On Apr 16, 3:23 pm, "Toller" <[email protected]> wrote:
> I am thinking of going to it.
> Anyone been there in the past with wisdom about how worthwhile it is, how
> much time it takes, whatever...
I went about 10 years ago. Fascinating! Huge machines that
spew out finished cabinets, etc. from raw input. However, first
time I ever saw Norm live was at the show.
I'd say go, if you are interested in the commercial side, however,
the "little" guys will most likely not be there to some degree but
every year there are some new products introduced.
I know that there is a show in the Phila. area that I think is the
best show for the hobbist/serious amateur
The latest Woodworking Shows here in Calif. have not been
extremely interesting. I use to wait for them to happen and now
I go about every OTHER year.
MJ Wallace
On Mon, 16 Apr 2007 22:23:37 GMT, "Toller" <[email protected]> wrote:
>I am thinking of going to it.
>Anyone been there in the past with wisdom about how worthwhile it is, how
>much time it takes, whatever...
>
Las Vegas took the place of the Anaheim show that used to alternate
with the Atlanta show every other year. When in Anaheim, it was
slightly smaller than Atlanta. I've not been since it has been moved
to Las Vegas. May go this year though.
When not working the shows, I have done Atlanta and Anaheim in one
very long day, however, I was cruising past a lot of stuff I had
little interest in (large CNC Automated systems for factory
processing, cabinet part suppliers, hinge and knob people, etc.) Plus
I would lose some time (well spent) talking with old friends with whom
I had worked with in the past. Seems like everyone in the industry,
stays in the industry, just moves from company to company. Would be
better to have a couple of days and take more time, particularly if
you are planning to buy and want to compare. After all, it's Las
Vegas, you might want to do some stuff unrelated to the WW show.
All the stationary machinery people and portable power tool and
accessory people will be there. you just have to plan your route to
get to them all. They tend to bunch them in the same areas.
I found it more valuable when I was actually looking for some things
and planning to buy. I've made a few final decisions on buying at the
show, and often you can get a show discount for something that is
delivered to your home or processed through a local dealer.
I always like to spend some time in the student competition area.
Some very nice and unique pieces in that competition.
Frank
"Toller" <[email protected]> wrote in message
news:[email protected]...
>I am thinking of going to it.
> Anyone been there in the past with wisdom about how worthwhile it is, how
> much time it takes, whatever...
>
While many of the familiar names in woodworking will be there, the focus of
the show is on the more commercial aspects of WW.
Machines which take 4x8 plywood or melamine boards as inputs, deliver fully
cut and finished cabinet parts as outputs! These machines take up the
majority of the floor space, as there are many manufacturers exhibiting.
Wood suppliers are there as well as drawer makers, glue manufacturers,
finish suppliers, hardware vendors etc.
For a complete listing go to
http://www.awfssupplierfinder.org/ExhibitorList2.asp?EXHID=15&ALPH=A
Or go to their homepage at http://www.awfsfair.org/awfsfair/home/index.asp.
I went two years ago and although tiring, it was enjoyable for me.
"TinWoodsmn" <[email protected]> wrote in message
news:[email protected]...
> "Toller" <[email protected]> wrote in message
> news:[email protected]...
>>I am thinking of going to it.
>> Anyone been there in the past with wisdom about how worthwhile it is, how
>> much time it takes, whatever...
>>
>
> While many of the familiar names in woodworking will be there, the focus
> of the show is on the more commercial aspects of WW.
>
> Machines which take 4x8 plywood or melamine boards as inputs, deliver
> fully cut and finished cabinet parts as outputs! These machines take up
> the majority of the floor space, as there are many manufacturers
> exhibiting. Wood suppliers are there as well as drawer makers, glue
> manufacturers, finish suppliers, hardware vendors etc.
>
> For a complete listing go to
> http://www.awfssupplierfinder.org/ExhibitorList2.asp?EXHID=15&ALPH=A
>
> Or go to their homepage at
> http://www.awfsfair.org/awfsfair/home/index.asp.
>
> I went two years ago and although tiring, it was enjoyable for me.
I am particularly interested in combination machines, so I want a show where
they will all be. LV is the only one I could find. Is there another large
consumer oriented show?