John wrote:
> I have just built some cabinets that have eight tambour doors. I used
> "store bought" tambour and am not sure of the quality of the cloth
> backing as to longevity. Has anybody used a method of additional
> reinforcement to prevent future problems?
I wonder if you could glue some upholstery-type vinyl (threaded side to
the canvas) that would add some strength and longevity. Now that
you've got me thinking about it, why not use vinyl in the first place?
That naugahyde stuff last a billion years, even though innocent naugas
have to be schlaughtered to get the hides.
Just a bit of brainstorming.
-Phil Crow
[email protected] wrote:
> Just a bit of brainstorming.
Sorry, no more brainstorming in Ireland. "Thought-showering" is
politically correct, though.
http://www.theinquirer.net/?article=24319
<[email protected]> wrote in message
news:[email protected]...
>
>
> John wrote:
> > I have just built some cabinets that have eight tambour doors. I used
> > "store bought" tambour and am not sure of the quality of the cloth
> > backing as to longevity. Has anybody used a method of additional
> > reinforcement to prevent future problems?
>
> I wonder if you could glue some upholstery-type vinyl (threaded side to
> the canvas) that would add some strength and longevity. Now that
> you've got me thinking about it, why not use vinyl in the first place?
> That naugahyde stuff last a billion years, even though innocent naugas
> have to be schlaughtered to get the hides.
>
> Just a bit of brainstorming.
>
> -Phil Crow
>
Naugas can be skinned without harm to the beast, however it is difficult to
glue their hides to wooden slats...
"John" <[email protected]> wrote in message
> I have just built some cabinets that have eight tambour doors. I used
> "store bought" tambour and am not sure of the quality of the cloth
> backing as to longevity. Has anybody used a method of additional
> reinforcement to prevent future problems?
As Mike as said, painting canvas works fine for tambour doors and is easily
available. I wouldn't worry about reinforcing the ones you have until if and
when the original cloth starts to wear out. Fix it then.
On Fri, 8 Jul 2005 06:48:24 -0400, the opaque "Upscale"
<[email protected]> clearly wrote:
>"John" <[email protected]> wrote in message
>> I have just built some cabinets that have eight tambour doors. I used
>> "store bought" tambour and am not sure of the quality of the cloth
>> backing as to longevity. Has anybody used a method of additional
>> reinforcement to prevent future problems?
>
>As Mike as said, painting canvas works fine for tambour doors and is easily
>available. I wouldn't worry about reinforcing the ones you have until if and
>when the original cloth starts to wear out. Fix it then.
The best way to extend mechanical devices is to clean, lube, and
maintain the guide surfaces. People force them when they stick.
That's what usually causes premature failure.
-
Press HERE to arm. (Release to detonate.)
-----------
http://diversify.com Website Application Programming
"John" <[email protected]> wrote in message
news:[email protected]...
> I have just built some cabinets that have eight tambour doors. I used
> "store bought" tambour and am not sure of the quality of the cloth
> backing as to longevity. Has anybody used a method of additional
> reinforcement to prevent future problems?
>
I have used heavy duty canvas in the past ,available from most good painting
supply stores...mjh