Going to paint kitchen cabinets. Would like to give doors a different look.
Now flat. Thinking of gluing a fake "raised panel" and edging to the door
to give it the raised panel look. Could run MDF through the table saw to
get the fake panels. But, wondering if there is a source for ready made
ones that could be glued on then painted. Please tell me if you know of a
source
Mike B
----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
I call them panel moldings.
"Pat Barber" <[email protected]> wrote in message
news:[email protected]...
>I forget the proper name, but years ago, you could buy a
> molding used exactly for this purpose. Back in the days
> of birch kitchen cabinets, a "upgrade" would be the door
> edges covered in this molding which does give the appearnace
> of a "raised panel". Go to the oldest lumber company you can
> find and ask around.
>
>
>
> nevems2 wrote:
>
>> Going to paint kitchen cabinets. Would like to give doors a different
>> look.
>> Now flat. Thinking of gluing a fake "raised panel" and edging to the
>> door
>> to give it the raised panel look. Could run MDF through the table saw to
>> get the fake panels. But, wondering if there is a source for ready made
>> ones that could be glued on then painted. Please tell me if you know of
>> a
>> source
>>
>> Mike B
>>
>>
>>
>> ----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet
>> News==----
>> http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+
>> Newsgroups
>> ----= East and West-Coast Server Farms - Total Privacy via Encryption
>> =----
I forget the proper name, but years ago, you could buy a
molding used exactly for this purpose. Back in the days
of birch kitchen cabinets, a "upgrade" would be the door
edges covered in this molding which does give the appearnace
of a "raised panel". Go to the oldest lumber company you can
find and ask around.
nevems2 wrote:
> Going to paint kitchen cabinets. Would like to give doors a different look.
> Now flat. Thinking of gluing a fake "raised panel" and edging to the door
> to give it the raised panel look. Could run MDF through the table saw to
> get the fake panels. But, wondering if there is a source for ready made
> ones that could be glued on then painted. Please tell me if you know of a
> source
>
> Mike B
>
>
>
> ----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
> http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
> ----= East and West-Coast Server Farms - Total Privacy via Encryption =----