I'm regluing an old dining room suite. Sometimes in sanding off the
old glue, I have sanded beyong the boundary of the joiint. These areas
will have to be touched up when gluing is completed.
I'm concerned about using a glue that will degrade the strength of the
glued joint. I'm using hide glue. Does anyone have any suggestions as
to the best bet on touch-up finishes to use that won't degrade the
joint strength?
I'm thninking of Minwax Satin Polyshade, applid with a Q-tip. Any
comments would be very welcome.
www.refinishwizard.com probably would help.
On Wed, 18 May 2005 13:40:36 GMT, Ward Wheeler <[email protected]>
wrote:
>I'm regluing an old dining room suite. Sometimes in sanding off the
>old glue, I have sanded beyong the boundary of the joiint. These areas
>will have to be touched up when gluing is completed.
>
>I'm concerned about using a glue that will degrade the strength of the
>glued joint. I'm using hide glue. Does anyone have any suggestions as
>to the best bet on touch-up finishes to use that won't degrade the
>joint strength?
>
>I'm thninking of Minwax Satin Polyshade, applid with a Q-tip. Any
>comments would be very welcome.