I was making a cut on a plane with my fantastic sword steel chisel from Misugi
designs. Been using it for a couple weeks since I sharpened it and it is still
very sharp. I did this Tuesday when the piece popped off and my wrist rotated
right into the chisel. Looks like it is closing up well but it can sure ache.
Makes gripping things a pain. Be careful out there.
http://www.knight-toolworks.com/pictures/stiches.jpg
--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.
On Thu, 07 Apr 2005 21:47:12 -0700, Steve Knight
<[email protected]> wrote:
> I was making a cut on a plane with my fantastic sword steel chisel from Misugi
>designs. Been using it for a couple weeks since I sharpened it and it is still
>very sharp. I did this Tuesday when the piece popped off and my wrist rotated
>right into the chisel. Looks like it is closing up well but it can sure ache.
>Makes gripping things a pain. Be careful out there.
>http://www.knight-toolworks.com/pictures/stiches.jpg
Keep that up, and you'll look like me. (The wife has recently taken to
calling me Frankenstein)
Aut inveniam viam aut faciam
Lowell Holmes wrote:
> Steve,
> I have a band aid autographed by Roy Undrhill.
> If I send you a band aid, will you autograph it so I can start a collection?
If he pushed a chisel into his wrist, he's lucky that he wasn't
hurt worse. Sounds like a bandaid may not be enough. Even a dull
chisel is sharp and you can make a nice slice before you can
react.
Dave in Fairfax
--
Dave Leader
reply-to doesn't work
use:
daveldr at att dot net
American Association of Woodturners
http://www.woodturner.org
Capital Area Woodturners
http://www.capwoodturners.org/
PATINA
http://www.Patinatools.org/
Ouch!
I hope you heal fast.
Dave
"Steve Knight" <[email protected]> wrote in message
news:[email protected]...
> I was making a cut on a plane with my fantastic sword steel chisel from
> Misugi
> designs. Been using it for a couple weeks since I sharpened it and it is
> still
> very sharp. I did this Tuesday when the piece popped off and my wrist
> rotated
> right into the chisel. Looks like it is closing up well but it can sure
> ache.
> Makes gripping things a pain. Be careful out there.
> http://www.knight-toolworks.com/pictures/stiches.jpg
>
> --
> Knight-Toolworks & Custom Planes
> Custom made wooden planes at reasonable prices
> See http://www.knight-toolworks.com For prices and ordering instructions.
Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com
On Thu, 07 Apr 2005 21:47:12 -0700, the inscrutable Steve Knight
<[email protected]> spake:
> I was making a cut on a plane with my fantastic sword steel chisel from Misugi
>designs. Been using it for a couple weeks since I sharpened it and it is still
>very sharp. I did this Tuesday when the piece popped off and my wrist rotated
>right into the chisel. Looks like it is closing up well but it can sure ache.
>Makes gripping things a pain. Be careful out there.
>http://www.knight-toolworks.com/pictures/stiches.jpg
Learn to be smarter than the chisel, Grasshoppah.
<bseg>
LJ--whose thumb skin is scabbing nicely this week. (9mm "tool")
--
A lot of folks can't understand how we came
to have an oil shortage here in America.
Well, there's a very simple answer...nobody
bothered to check the oil; We just didn't
know we were getting low.
The reason for that is purely geographical
- our OIL is located in Alaska, California,
Oklahoma and Texas.
Our DIPSTICKS are located in Washington, DC.
On Thu, 07 Apr 2005 21:47:12 -0700, Steve Knight
<[email protected]> wrote:
> I was making a cut on a plane with my fantastic sword steel chisel from Misugi
>designs. Been using it for a couple weeks since I sharpened it and it is still
>very sharp. I did this Tuesday when the piece popped off and my wrist rotated
>right into the chisel. Looks like it is closing up well but it can sure ache.
>Makes gripping things a pain. Be careful out there.
>http://www.knight-toolworks.com/pictures/stiches.jpg
Yow! Hope that gets to feeling better soon.
+--------------------------------------------------------------------------------+
The absence of accidents does not mean the presence of safety
Army General Richard Cody
+--------------------------------------------------------------------------------+
>Right. Me too. Mine is item C. You were referring to item A?
>
>To Mr. Knight and anyone else, how do these hold up to tropicals? IIRC,
>most traditional Japanese woodwork is softwood, maybe some oak now and
>then (Odate's 'Spirit' book).
right a or b are the better ones.
I just sharpen them to a 30 degree bevel and they are fine.
--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.
On 8 Apr 2005 11:08:15 -0700, "arw01" <[email protected]> wrote:
>Hey Steve..
>Would you buy the other less often used Japan woodworkers chisels
>again, would you save for the Misugi's one at a time?
I love the white steel chisels. they must hold an edge twice as long. but the
lower end Japanese chisels from Japan woodworker are fine. they just don't hold
an edge as long as the high end chisels. but they are far better then most
chisels out there. I am not talking the cheapest they sell but the white or blue
steel lower priced ones.
--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.
>Yah. I just got one Japan Woodworker branded chisel to see what the fuss
>was about. Fit and finish were about the same as any other chisel in that
>price range. My JW chisel is comparable to my FatMaxes, but
>better than my Blue chips. Took about the same amount of time to tune it
>up to useablility. The "hollow" is poorly ground, not tapped out (in?). To
>be fair, it's the 1/8" size; maybe the tiny ones are built differently
>from the wider sizes.
>
>
http://japanwoodworkeronline.com/041203_JWW_SITE/0013.htm these are the ones I
was talking about.
--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.
Unquestionably Confused wrote:
>>> I have a band aid autographed by Roy Undrhill.
>>
>> No value in that. He must have a million of them!
>
> Yeah! C'mon back when you have a Underhill fingertip in a jar of
> formalin. THAT will be a limited edition item<g>
I know *I'd* be impressed.
--
Mortimer Schnerd, RN
[email protected]
on 4/8/2005 4:09 PM Larry Jaques said the following:
> On Thu, 07 Apr 2005 21:47:12 -0700, the inscrutable Steve Knight
> <[email protected]> spake:
>
>
> Learn to be smarter than the chisel, Grasshoppah.
> <bseg>
>
> LJ--whose thumb skin is scabbing nicely this week. (9mm "tool")
Browning Hi-Power thumb web destroyer?
"Mortimer Schnerd, RN" <[email protected]> wrote in
news:[email protected]:
> Unquestionably Confused wrote:
>>>> I have a band aid autographed by Roy Undrhill.
>>>
>>> No value in that. He must have a million of them!
>>
>> Yeah! C'mon back when you have a Underhill fingertip in a jar of
>> formalin. THAT will be a limited edition item<g>
>
>
>
> I know *I'd* be impressed.
>
>
>
>
A Wendy's chili joke here would be in really poor taste, wouldn't it?
Thought so.
Larry Jaques wrote:
>>> LJ--whose thumb skin is scabbing nicely this week. (9mm "tool")
>>
>> Browning Hi-Power thumb web destroyer?
>
> Something like that. The little P-11 bites my thumb knuckles before
> a single box is empty.
Kel-Tec? I've got one but it's never bitten me. The trigger pull has worn me
out though.
--
Mortimer Schnerd, RN
[email protected]
In article <[email protected]>,
Steve Knight <[email protected]> wrote:
> I was making a cut on a plane with my fantastic sword steel chisel from
> Misugi
> designs. Been using it for a couple weeks since I sharpened it and it is
> still
> very sharp. I did this Tuesday when the piece popped off and my wrist rotated
> right into the chisel. Looks like it is closing up well but it can sure
> ache.
> Makes gripping things a pain. Be careful out there.
> http://www.knight-toolworks.com/pictures/stiches.jpg
Ouch! That was close to a nice-size vein as well.
Getter better soon!
In article <[email protected]>,
Steve Knight <[email protected]> wrote:
> >Ouch! That was close to a nice-size vein as well.
> >Getter better soon!
>
> I was freaking because of that. it bled like crazy then just stopped.
Probably some sawdust/wood fibres made their way to the wound,
coagulating and plugging the hole....<G>.. that bubinga is good for
that...
On Fri, 08 Apr 2005 21:32:39 GMT, the inscrutable Unquestionably
Confused <[email protected]> spake:
>on 4/8/2005 4:09 PM Larry Jaques said the following:
>> On Thu, 07 Apr 2005 21:47:12 -0700, the inscrutable Steve Knight
>> <[email protected]> spake:
>>
>>
>> Learn to be smarter than the chisel, Grasshoppah.
>> <bseg>
>>
>> LJ--whose thumb skin is scabbing nicely this week. (9mm "tool")
>
>Browning Hi-Power thumb web destroyer?
Something like that. The little P-11 bites my thumb knuckles before
a single box is empty.
--
A lot of folks can't understand how we came
to have an oil shortage here in America.
Well, there's a very simple answer...nobody
bothered to check the oil; We just didn't
know we were getting low.
The reason for that is purely geographical
- our OIL is located in Alaska, California,
Oklahoma and Texas.
Our DIPSTICKS are located in Washington, DC.
"Steve Knight" <[email protected]> wrote in message
news:[email protected]...
> I was making a cut on a plane with my fantastic sword steel chisel from
> Misugi
> designs. Been using it for a couple weeks since I sharpened it and it is
> still
> very sharp. I did this Tuesday when the piece popped off and my wrist
> rotated
> right into the chisel. Looks like it is closing up well but it can sure
> ache.
> Makes gripping things a pain. Be careful out there.
> http://www.knight-toolworks.com/pictures/stiches.jpg
>
> --
> Knight-Toolworks & Custom Planes
> Custom made wooden planes at reasonable prices
> See http://www.knight-toolworks.com For prices and ordering instructions.
Steve,
I have a band aid autographed by Roy Undrhill.
If I send you a band aid, will you autograph it so I can start a collection?
:-)
on 4/8/2005 11:56 AM Mortimer Schnerd, RN said the following:
> Lowell Holmes wrote:
>
>>I have a band aid autographed by Roy Undrhill.
>
>
> No value in that. He must have a million of them!
Yeah! C'mon back when you have a Underhill fingertip in a jar of
formalin. THAT will be a limited edition item<g>
Lowell Holmes wrote:
> I have a band aid autographed by Roy Undrhill.
No value in that. He must have a million of them!
--
Mortimer Schnerd, RN
[email protected]
On Fri, 08 Apr 2005 23:51:20 GMT, the inscrutable "Mortimer Schnerd,
RN" <[email protected]> spake:
>Larry Jaques wrote:
>>>> LJ--whose thumb skin is scabbing nicely this week. (9mm "tool")
>>>
>>> Browning Hi-Power thumb web destroyer?
>>
>> Something like that. The little P-11 bites my thumb knuckles before
>> a single box is empty.
>
>Kel-Tec? I've got one but it's never bitten me. The trigger pull has worn me
>out though.
The scab is 1/8" in diameter, more a nibble than a bite. But say what?
You don't like a 4' long, 10.5 lb. pull? Gee, I wonder why. It's a
good thing to have on a piece which doesn't have a safety.
Yeah, it fits my hand just low enough that the curve of the body is
driven right into the top of the thumb knuckle each time it's fired.
I have to remember to put on either gloves or bandaids before I go
practicing at the range.
--
A lot of folks can't understand how we came
to have an oil shortage here in America.
Well, there's a very simple answer...nobody
bothered to check the oil; We just didn't
know we were getting low.
The reason for that is purely geographical
- our OIL is located in Alaska, California,
Oklahoma and Texas.
Our DIPSTICKS are located in Washington, DC.
>Steve,
>I have a band aid autographed by Roy Undrhill.
>If I send you a band aid, will you autograph it so I can start a collection?
>
>:-)
if you want me to use it first you need to send one of those jumbo ones (G)
--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.
On Fri, 08 Apr 2005 21:25:18 -0700, Steve Knight wrote:
> I am not talking the cheapest they sell but the white or blue
> steel lower priced ones.
Yah. I just got one Japan Woodworker branded chisel to see what the fuss
was about. Fit and finish were about the same as any other chisel in that
price range. My JW chisel is comparable to my FatMaxes, but
better than my Blue chips. Took about the same amount of time to tune it
up to useablility. The "hollow" is poorly ground, not tapped out (in?). To
be fair, it's the 1/8" size; maybe the tiny ones are built differently
from the wider sizes.
With my whoppingly huge sample size of 1, I'd say that the JW brand isn't
a good choice. For only a little more, one can get the ones Steve
mentioned in his post.
Shure is purty, tho. ;)
--
"Keep your ass behind you"
vladimir a t mad {dot} scientist {dot} com
On Sat, 09 Apr 2005 11:59:43 -0700, Steve Knight wrote:
...
>>was about. Fit and finish were about the same as any other chisel in that
>>price range. My JW chisel is comparable to my FatMaxes, but
...
>>
> http://japanwoodworkeronline.com/041203_JWW_SITE/0013.htm these are the ones I
> was talking about.
Right. Me too. Mine is item C. You were referring to item A?
To Mr. Knight and anyone else, how do these hold up to tropicals? IIRC,
most traditional Japanese woodwork is softwood, maybe some oak now and
then (Odate's 'Spirit' book).
--
"Keep your ass behind you"
vladimir a t mad {dot} scientist {dot} com