Hope I am not beginning to sound like a flatulent senior citizen
(that's an old fart for those in Loma Linda).
I have started to do some rather small wood projects and of course, do
need some basic tools to do this beyond hand held tools, hence my
"Just Three" previous post - the responses there were very helpful in
deciding what to get. Having said this, what is the basic difference
between "refinishing and refurbishing" a piece of furniture. Case in
point, I recently sanded and added new hardware to a cedar chest my
daughter bought at a garage sale - came out pretty good (I'll post a
few pics in a few days at alt.binaries.pictures.woodworking). My next
project is to repair an old secretary type desk with a roll up front
that was discarded in front of a house that was being gutted for a
"flip" and sale. The desk needs extensive repair and of course
sanding, staining and varnishing. It may just be a matter of
semantics, but the definitions in my old college dictionary did not
satisfy my curiosity.
Many thanks in advance,
Ray
===
J T wrote:
> Thu, Nov 15, 2007, 5:31pm (EST+5) [email protected]
> (Ray S. & Nayda Katzaman) doth queryeth:
> <snip> what is the basic difference between "refinishing and
> refurbishing" a piece of furniture. <snip>
>
> If you're over the age of 15 you should already know the answer -
> depends on who's saying it, and what they meant at the time. No matter
> what you may be told here, you'll never know what the speaker means,
> until you ask the speaker.
>
> JOAT
> The whole of life is a learning process.
> - John Keel
Jack,
Really appreciated your response, including the philosophical bit at the
end. I'm just glad you did not send me to Google for more info.
Again, thanks.
Ray
===
Fri, Nov 16, 2007, 12:20am (EST+5) [email protected]
(Ray=A0S.=A0&=A0Nayda=A0Katzaman) doth posteth:
Jack,
Really appreciated your response, including the philosophical bit at the
end. I'm just glad you did not send me to Google for more info.
Again, thanks.
Jack, Jack, who's Jack? Damn, forgot. Best check google for
additional details.
JOAT
The whole of life is a learning process.
- John Keel
Thu, Nov 15, 2007, 5:31pm (EST+5) [email protected]
(Ray=A0S.=A0&=A0Nayda=A0Katzaman) doth queryeth:
<snip> what is the basic difference between "refinishing and
refurbishing" a piece of furniture. <snip>
If you're over the age of 15 you should already know the answer -
depends on who's saying it, and what they meant at the time. No matter
what you may be told here, you'll never know what the speaker means,
until you ask the speaker.
JOAT
The whole of life is a learning process.
- John Keel
On Nov 15, 11:31 am, "Ray Katzaman" wrote:
> I have started to do some rather small wood projects...
Hello Ray...
Rebuilding solid wood projects from the past is satisfying, but is
also the most comprehensive way for a novice to learn and appreciate
wood structures and design. When possible, I knock the piece
completely apart. In its component parts, it is much easier to
refurbish the wood and implement any necessary repairs. Your
opportunity to learn is greatly enhanced, and you get to refit and
glue all the joints.
Refinishing only changes/renews the finished surface. Refurbish repairs
broken pieces, loose parts, etc.
"Ray S. & Nayda Katzaman" <[email protected]> wrote in message
news:[email protected]...
> Hope I am not beginning to sound like a flatulent senior citizen
> (that's an old fart for those in Loma Linda).
>
> I have started to do some rather small wood projects and of course, do
> need some basic tools to do this beyond hand held tools, hence my
> "Just Three" previous post - the responses there were very helpful in
> deciding what to get. Having said this, what is the basic difference
> between "refinishing and refurbishing" a piece of furniture. Case in
> point, I recently sanded and added new hardware to a cedar chest my
> daughter bought at a garage sale - came out pretty good (I'll post a
> few pics in a few days at alt.binaries.pictures.woodworking). My next
> project is to repair an old secretary type desk with a roll up front
> that was discarded in front of a house that was being gutted for a
> "flip" and sale. The desk needs extensive repair and of course
> sanding, staining and varnishing. It may just be a matter of
> semantics, but the definitions in my old college dictionary did not
> satisfy my curiosity.
>
> Many thanks in advance,
>
> Ray
> ===
>