Owamanga:
I don't live where there's a lot humidity like Florida, but suggest
that you might want to do the following:
1) Get a dehumidfier for the garage.
2) Work at keeping rust at bay. Use floor wax (no silicone) on
tablesaws, blades,
chisels, etc. to prevent them from getting rust. I'd imagine you
will have to
this on a regular basis, like weekly.
3) Look for Boshield at a Rockler, Woodcraft (I think Lowes might carry
it). It's
a rust inhibitor. Instructions on the product.
Good luck. Also do a Google search in this newsgroup for terms like
"humidity"
"Florida", etc. A lot of woodworkers are in Florida.
Oh, find a class or a club near by. Ask the members what they would do.
A club
might be found by doing a Google search.
MJ Wallace
Owamanga wrote:
> Has anyone experienced problems storing power tools, or other workshop
> paraphernalia (varnishes etc) long term in a workshop that has no a/c
> and is in a tropical humid climate?
>
> I keep portable power tools inside, partly for security but table saws
> etc are going to be too big.
>
> Cheers
Like was said earlier, if you use it it won't rust. But if you aren't
apt to use the tools a great amount and just aim to tinker with some
projects here and there, you might check into some with cast aluminum
tables. I've a small craftsman table saw that sees very little use
(maybe twice per year) and aside from wiping the dust off of it I've
never had any problems.
Also located in humid Kentucky,
D.
Owamanga wrote:
> Has anyone experienced problems storing power tools, or other workshop
> paraphernalia (varnishes etc) long term in a workshop that has no a/c
> and is in a tropical humid climate?
>
> I keep portable power tools inside, partly for security but table saws
> etc are going to be too big.
>
> Cheers
[email protected] wrote:
> Like was said earlier, if you use it it won't rust.
That is a profoundly illogical statement. Oxidation isn't inhibited by
mechanical activity.
Dhakala wrote:
> [email protected] wrote:
>
> > Like was said earlier, if you use it it won't rust.
>
> That is a profoundly illogical statement. Oxidation isn't inhibited by
> mechanical activity.
Thank you Mr. Spock....
Though true in a strictly speaking sense, your statement doesn't really
hold water for this particular discussion.
Mechanical activity doesn't "inhibit" oxidization but the use of
woodworking tools does. It helps prevent and reduce the effects of
oxidization.
Just so we're clear. Oxidization --- in simple terms --- rust.
I'm no scientist but I know that if I use my tools regularly they don't
rust. My uneducated guess would be the oils from your hands, sap from
boards, and abrasion created by sliding wood/materials across the metal
surfaces combine to help polish and protect them from rust.
If you take two saws and use one once or twice a week for a month and
leave the second alone for the same time frame I'll bet you that the
unused saw will show signs of rust.
I think it's the sorrow of imagined abandonment that causes unused
tools to rust. They become scared that you've forgotten about them and
their tears of sorrow and heartache cause the rust.... ;-)
Owamanga wrote:
> Has anyone experienced problems storing power tools, or other workshop
> paraphernalia (varnishes etc) long term in a workshop that has no a/c
> and is in a tropical humid climate?
>
> I keep portable power tools inside, partly for security but table saws
> etc are going to be too big.
>
> Cheers
I used to live in the deep south, and I had no problems. No A/C, no
dehumidifier, windows open... Use TopCoat (or something similiar) on
your iron surfaces, and wipe off the sweat the drips from yourself LOL.
Made it through a lot of 95+% humidity summers. Still have most of the
same tools now.
>> [email protected] wrote:
>> Like was said earlier, if you use it it won't rust.
> "Dhakala"
> That is a profoundly illogical statement. Oxidation isn't inhibited by
> mechanical activity.
Its clear you don't fall in the class of woodworkers that actually use your
tools very often. My fathers table saw NEVER received any rust preventive
for 20+ years. It's only recently I had to use some TopCote. But then
again, he is 80!
Dave
[email protected] wrote:
> Owamanga:
>
<snip good suggestions, 1) dehumidifier, 2) wax, 3) Boeshield>
I have also found that rapid changes in temperature accelerates
oxidation, so using an AC has to be a constant thing, in which case the
shop needs to be well insulated.
H
Tim Taylor wrote:
> I used a $78 window unit, and another, and another. Even with a good
> filter system in a very small shop, dust is a killer on the window
> unit.
Well, I'm in a small (11x13) shop with no dust collection other than a
homemade box with fan and filters to get the really fine stuff out of
the air. Half the time I forget to run it.
I've got a window AC (maybe $98) that I've been using for about 4 years
now. It still runs fine. I cut down a furnace filter and taped it
across the intake on the outside. Every time I vacuum the floor, I run
the vacuum over the filter. So far so good.
Note that I am a hobbyist and my four years of use probably doesn't
equal one year of full time use. But still, for that price ...
--
It's turtles, all the way down
A $78 window air conditioner saves the tools and the man. No sweat on the
tools, moisure content of lumber is stable, and its as cheap as a
dehumidifier.
Jim with no sweat in Kentucky
"Owamanga" <[email protected]> wrote in message
news:[email protected]...
> Has anyone experienced problems storing power tools, or other workshop
> paraphernalia (varnishes etc) long term in a workshop that has no a/c
> and is in a tropical humid climate?
>
> I keep portable power tools inside, partly for security but table saws
> etc are going to be too big.
>
> Cheers
"mac davis" <[email protected]> wrote in message
news:[email protected]...
> On Thu, 15 Jun 2006 12:52:23 -0400, "Giganews" <[email protected]>
> wrote:
>
> I've tried both window and portable A/C in a garage and neither did much
> except
> spin the electric meter...
>
> My best cooling is with a LARGE round-cage fan blowing in a window and
> another
> big box fan blowing out the garage door... with A/C I tried working with
> the
> door closed and it just got hotter...
>
> In my office I use a window unit with a small oscillating fan in front of
> it to
> spread the air... a ceiling fan would help, too.. but both would be
> disruptive
> in a shop...
>
> My new shop will be enclosed and have built in heat and A/C but that
> presents
> another set of problems... keeping dust out of the unit... *sigh*
>
>
>
Well, not that it's really useful info, but I seperated my unit in it's own
little space in a corner of the garage. I've got the intakes in the "closet"
if you will, pretty good. I can go about 4 months before changing the filter
on the unit itself, and once a month or so on the filters on the intakes. I
buy the el cheapo blue fiberglass filters by the case for a little of
nothing. It's a 2 ton unit that serves double duty heating/cooling the
garage and shop.
>
>>I too have been researching cooling my 1 car garage workshop.
>>
>>For my purposes (hobbyist plus car in garage when tools not in use)
>>I am almost decided on the portable AC units.
>>
>>My understanding is that swamp coolers (evaporative cooling) won't
>>work in Florida.
>>
>>Has anyone used the portable AC units? They have small intake and
>>exhaust hoses about 5 feet long. I plan on opening the garage door a few
>>inches and putting the hoses there when the AC is in use. I'll put some
>>scrap
>>wood along the rest of the door to seal it a bit.
>>
>>The portable units are very expensive compared to a window unit about
>>5-600
>>$
>>for 10,000 BTUs. I'd like to get the temperature down to about 80 within
>>45
>>minutes.
>>
>>
>
> Mac
>
> https://home.comcast.net/~mac.davis
> https://home.comcast.net/~mac.davis/wood_stuff.htm
On Thu, 15 Jun 2006 12:52:23 -0400, "Giganews" <[email protected]> wrote:
>I too have been researching cooling my 1 car garage workshop.
>
>For my purposes (hobbyist plus car in garage when tools not in use)
>I am almost decided on the portable AC units.
>
>Has anyone used the portable AC units? They have small intake and
>exhaust hoses about 5 feet long. I plan on opening the garage door a few
>inches and putting the hoses there when the AC is in use. I'll put some
>scrap
>wood along the rest of the door to seal it a bit.
>
>The portable units are very expensive compared to a window unit about 5-600
>$
>for 10,000 BTUs. I'd like to get the temperature down to about 80 within 45
>minutes.
>
I tried a portable A/C unit for a few days (3 car garashop) and it didn't do squat even with
insulation. Way undersized, but might help in a smaller area. I ran the vent hose into the attic
to get rid of the exhaust. Remember that these things suck in 20-25 percent outside air as the
exchange air for dumping the heat outside. So if the thing blows 250 cubic feet per minute, it will
suck in 50-60 cfm for the exhaust stream. They're not very efficient for that reason. We use it in
the dog days of summer to sleep cool the bedroom. If you know someone who has one, see if you can
borrow it for a couple of days and see how it works out.
It wouldn't cool my shop, but for detail work, you can adjust the vents to blow on you while working
quietly at the bench. My face would sweat, but my back was comfy. Check the window a/c web sites
for sizing assistance. I found that helpful when I was looking at window units. Westinghouse and
GE are a couple sites I remember.
Hope this helps.
Regards,
Roy
"Frank Boettcher" <[email protected]> wrote in message
news:[email protected]...
> On Mon, 12 Jun 2006 17:23:17 GMT, Owamanga
> <[email protected]> wrote:
>
>>Has anyone experienced problems storing power tools, or other workshop
>>paraphernalia (varnishes etc) long term in a workshop that has no a/c
>>and is in a tropical humid climate?
>>
>>I keep portable power tools inside, partly for security but table saws
>>etc are going to be too big.
>>
>>Cheers
>
> I live in Mississippi (high heat, high humidity) No air in shop. No
> real problems. Have to clean and wax those cast iron tables every so
> often, but not a problem. Most of the rust on the tools come from me
> dripping sweat on them.
>
> I visited a couple of shops that were in the Bahamas. Comments by the
> owners "if you use the stuff it doesn't have time to rust".
>
> Frank
I had an garage shop in Kissimmee and really did not have a problem with
rust. I kept the tools waxed and ran an 18-20 inch fan constantly.
Currently I have a separate shop building in the Ocala area and have the
same results using the wax/fan.
Good Luck.
MikeG
I too have been researching cooling my 1 car garage workshop.
For my purposes (hobbyist plus car in garage when tools not in use)
I am almost decided on the portable AC units.
My understanding is that swamp coolers (evaporative cooling) won't
work in Florida.
Has anyone used the portable AC units? They have small intake and
exhaust hoses about 5 feet long. I plan on opening the garage door a few
inches and putting the hoses there when the AC is in use. I'll put some
scrap
wood along the rest of the door to seal it a bit.
The portable units are very expensive compared to a window unit about 5-600
$
for 10,000 BTUs. I'd like to get the temperature down to about 80 within 45
minutes.
"Woodhead" <[email protected]> wrote in message
news:[email protected]...
>A $78 window air conditioner saves the tools and the man. No sweat on the
>tools, moisure content of lumber is stable, and its as cheap as a
>dehumidifier.
>
> Jim with no sweat in Kentucky
>
> "Owamanga" <[email protected]> wrote in message
> news:[email protected]...
>> Has anyone experienced problems storing power tools, or other workshop
>> paraphernalia (varnishes etc) long term in a workshop that has no a/c
>> and is in a tropical humid climate?
>>
>> I keep portable power tools inside, partly for security but table saws
>> etc are going to be too big.
>>
>> Cheers
>
>
I used a $78 window unit, and another, and another. Even with a good filter
system in a very small shop, dust is a killer on the window unit. So, for
$200 and a little digging, I got central air and heat. Life is good as
filters are 2 bucks a piece.:also with no sweat in Kentucky!
Bullshit.
"Dhakala" <[email protected]> wrote in message
news:[email protected]...
>
> [email protected] wrote:
>
> > Like was said earlier, if you use it it won't rust.
>
> That is a profoundly illogical statement. Oxidation isn't inhibited by
> mechanical activity.
>
On Wed, 14 Jun 2006 15:46:19 GMT, Owamanga <[email protected]> wrote:
>On 14 Jun 2006 08:19:53 -0700, "bf" <[email protected]> wrote:
>
>>
>>Owamanga wrote:
>>> Has anyone experienced problems storing power tools, or other workshop
>>> paraphernalia (varnishes etc) long term in a workshop that has no a/c
>>> and is in a tropical humid climate?
>>>
>>> I keep portable power tools inside, partly for security but table saws
>>> etc are going to be too big.
>>>
>>> Cheers
>>
>>I used to live in the deep south, and I had no problems. No A/C, no
>>dehumidifier, windows open... Use TopCoat (or something similiar) on
>>your iron surfaces, and wipe off the sweat the drips from yourself LOL.
>>Made it through a lot of 95+% humidity summers. Still have most of the
>>same tools now.
>
>It sounds like the main problem is that it'll be too hot for me to be
>in there for any length of time - especially during the summer. I
>don't mind being hot but it quickly gets to the point where you can't
>see due to the sweat dripping into your eyes.
>
>A window mounted A/C a couple of people suggested won't fly with the
>HOA unless I can conceal it completely, but one option would be to
>open the door connecting the house to the garage and let the central
>air try and cool the garage. Not sure how effective that'll be, (a fan
>or two could be positioned to help out) or what damage that might do
>to my house A/C in the long run.
I had the same problem with the Biddie Society last year. Had to be out of sight, so no window unit
allowed. I didn't want to cut a hole in the wall about a foot above the ground to house a large
window unit. So after 7 summers of sweating on my table saw and watching the rust form during a cut
(well, maybe that is a SLIGHT exaggeration) with the thermometer and the humidity both in triple
didgets, I'd had enough. I sprung for a small central air unit, and have not regretted it one bit.
(Well, maybe a bit, as that A/C replaced the good cabinet saw I'd been saving for.) Window units
are cheaper, but I am very happy I spent the money. It was 96 when I got home last night, 85 in the
shop. 15 minutes later it was 78 in there, and I was merrily pottering about the shop admiring the
lack of rust on everything.
I still wax tools out of general principle, but have found I can leave a plane on a shelf or the
chisels on the pegboard without them turning an orange color. I'm about 25 miles WSW of downtown
Houston as the crow flies. We've got another 90-120 days of this sort of weather this summer before
we can expect the next cool front and low humidity. These are days that would have mostly been lost
to woodworking in past years because the heat and humidity took an awful lot of the fun out of it
for me during the summer months.
If you use your house A/C to cool the shop, be prepared for lots of sawdust in the house. Assuming
no leakage to the outside, the cfm you blow into the shop for cooling will also flow back into the
house to the A/C inlet. The sawdust will flow with it. SWMBO will not be pleased. Trust me on
this.
Regards,
Roy
On Mon, 12 Jun 2006 17:23:17 GMT, Owamanga
<[email protected]> wrote:
>Has anyone experienced problems storing power tools, or other workshop
>paraphernalia (varnishes etc) long term in a workshop that has no a/c
>and is in a tropical humid climate?
>
>I keep portable power tools inside, partly for security but table saws
>etc are going to be too big.
>
>Cheers
I live in Mississippi (high heat, high humidity) No air in shop. No
real problems. Have to clean and wax those cast iron tables every so
often, but not a problem. Most of the rust on the tools come from me
dripping sweat on them.
I visited a couple of shops that were in the Bahamas. Comments by the
owners "if you use the stuff it doesn't have time to rust".
Frank
"Larry Blanchard" <[email protected]> wrote in message
news:[email protected]...
> Tim Taylor wrote:
>
>> I used a $78 window unit, and another, and another. Even with a good
>> filter system in a very small shop, dust is a killer on the window
>> unit.
>
> Well, I'm in a small (11x13) shop with no dust collection other than a
> homemade box with fan and filters to get the really fine stuff out of
> the air. Half the time I forget to run it.
>
> I've got a window AC (maybe $98) that I've been using for about 4 years
> now. It still runs fine. I cut down a furnace filter and taped it
> across the intake on the outside. Every time I vacuum the floor, I run
> the vacuum over the filter. So far so good.
>
> Note that I am a hobbyist and my four years of use probably doesn't
> equal one year of full time use. But still, for that price ...
>
> --
> It's turtles, all the way down
Oh yea, I agree with you. I just could never remember to clean the dang
filter!!! Seemed like I was pulling the unit 3 or 4 times a year and
spraying the coils. You know what they say about age I hope, cause I forgot.
On Thu, 15 Jun 2006 12:52:23 -0400, "Giganews" <[email protected]> wrote:
I've tried both window and portable A/C in a garage and neither did much except
spin the electric meter...
My best cooling is with a LARGE round-cage fan blowing in a window and another
big box fan blowing out the garage door... with A/C I tried working with the
door closed and it just got hotter...
In my office I use a window unit with a small oscillating fan in front of it to
spread the air... a ceiling fan would help, too.. but both would be disruptive
in a shop...
My new shop will be enclosed and have built in heat and A/C but that presents
another set of problems... keeping dust out of the unit... *sigh*
>I too have been researching cooling my 1 car garage workshop.
>
>For my purposes (hobbyist plus car in garage when tools not in use)
>I am almost decided on the portable AC units.
>
>My understanding is that swamp coolers (evaporative cooling) won't
>work in Florida.
>
>Has anyone used the portable AC units? They have small intake and
>exhaust hoses about 5 feet long. I plan on opening the garage door a few
>inches and putting the hoses there when the AC is in use. I'll put some
>scrap
>wood along the rest of the door to seal it a bit.
>
>The portable units are very expensive compared to a window unit about 5-600
>$
>for 10,000 BTUs. I'd like to get the temperature down to about 80 within 45
>minutes.
>
>
Mac
https://home.comcast.net/~mac.davis
https://home.comcast.net/~mac.davis/wood_stuff.htm
DAGS. There have been at least two big threads on this in the last year.
On Mon, 12 Jun 2006 17:23:17 GMT, Owamanga <[email protected]> wrote:
>Has anyone experienced problems storing power tools, or other workshop
>paraphernalia (varnishes etc) long term in a workshop that has no a/c
>and is in a tropical humid climate?
>
>I keep portable power tools inside, partly for security but table saws
>etc are going to be too big.
>
>Cheers
On Thu, 15 Jun 2006 12:52:23 -0400, "Giganews" <[email protected]>
wrote:
>I too have been researching cooling my 1 car garage workshop.
>
>For my purposes (hobbyist plus car in garage when tools not in use)
>I am almost decided on the portable AC units.
>
>My understanding is that swamp coolers (evaporative cooling) won't
>work in Florida.
>
>Has anyone used the portable AC units? They have small intake and
>exhaust hoses about 5 feet long. I plan on opening the garage door a few
>inches and putting the hoses there when the AC is in use. I'll put some
>scrap
>wood along the rest of the door to seal it a bit.
>
>The portable units are very expensive compared to a window unit about 5-600
>$
>for 10,000 BTUs. I'd like to get the temperature down to about 80 within 45
>minutes.
>
>
You quickly discover how leaky a garage is when you start dumping BTUs
of cooling in there, waiting for a change. I put a fairly big window
shaker in mine (~6-7kbtu) and it didn't do squat. If you stood right
in front of it you were OK but on the other end of the garage it was
still hot.
Swamp coolers don't work in a swamp. They should be called desert
coolers.
On 14 Jun 2006 08:19:53 -0700, "bf" <[email protected]> wrote:
>
>Owamanga wrote:
>> Has anyone experienced problems storing power tools, or other workshop
>> paraphernalia (varnishes etc) long term in a workshop that has no a/c
>> and is in a tropical humid climate?
>>
>> I keep portable power tools inside, partly for security but table saws
>> etc are going to be too big.
>>
>> Cheers
>
>I used to live in the deep south, and I had no problems. No A/C, no
>dehumidifier, windows open... Use TopCoat (or something similiar) on
>your iron surfaces, and wipe off the sweat the drips from yourself LOL.
>Made it through a lot of 95+% humidity summers. Still have most of the
>same tools now.
It sounds like the main problem is that it'll be too hot for me to be
in there for any length of time - especially during the summer. I
don't mind being hot but it quickly gets to the point where you can't
see due to the sweat dripping into your eyes.
A window mounted A/C a couple of people suggested won't fly with the
HOA unless I can conceal it completely, but one option would be to
open the door connecting the house to the garage and let the central
air try and cool the garage. Not sure how effective that'll be, (a fan
or two could be positioned to help out) or what damage that might do
to my house A/C in the long run.
On Wed, 14 Jun 2006 15:46:19 GMT, Owamanga
<[email protected]> wrote:
>It sounds like the main problem is that it'll be too hot for me to be
>in there for any length of time -
My "shop" is my garage in Ft Myers/Naples area. I find that with a big
fan and the garage door open it is tolerable. If you are working
outside I find one of those big "market umbrellas" is a handy thing to
keep the sun off me. I usually do take sanding, sawing and router work
outside if I will be generating a lot of dust and chips. I can then
simply hose the stuff off into the grass.