My problems with cordless tools is the limited run time before the next
charge. Its not a problem with drills as it could run for a long time but
for demanding loads like circular and reciprocation saws (my new DeWalt
cordless NiCad combo) the 5 minute run time paired with a one hour charger
doesn't cut it. For the reciprocating saw, the fully charged battery was
able to crosscut about six 6" dia soft wood before it needed a charge. Grab
the second battery and another six crosscuts was all she got. Makes a short
working day. Even with the lithium iron, the run time may not be more than
three times as much but should be enough when paired with a fast 15 minute
charger. I'll take my corded Super Sawzall next time.
" Frank" <[email protected]> wrote in message
news:[email protected]...
> My problems with cordless tools is the limited run time before the next
> charge. Its not a problem with drills as it could run for a long time but
> for demanding loads like circular and reciprocation saws (my new DeWalt
> cordless NiCad combo) the 5 minute run time paired with a one hour charger
> doesn't cut it. For the reciprocating saw, the fully charged battery was
> able to crosscut about six 6" dia soft wood before it needed a charge.
> Grab the second battery and another six crosscuts was all she got. Makes a
> short working day. Even with the lithium iron, the run time may not be
> more than three times as much but should be enough when paired with a fast
> 15 minute charger. I'll take my corded Super Sawzall next time.
>
I totally agree unless you have a specific need to make a few cuts where
there is no power available.
Other than that the drill, impact driver, and flash light are about the only
tools that I want to be cordless. Now if tool manufacturers would simply
come out with a battery shaped adapter with a tail so that you could use the
saws like a normal saw but still have the ability for the times you need to
cut with out power being available.
On May 3, 4:13 pm, "Leon" <[email protected]> wrote:
> " Frank" <[email protected]> wrote in message
>
> news:[email protected]...
>
> > My problems with cordless tools is the limited run time before the next
> > charge. Its not a problem with drills as it could run for a long time but
> > for demanding loads like circular and reciprocation saws (my new DeWalt
> > cordless NiCad combo) the 5 minute run time paired with a one hour charger
> > doesn't cut it. For the reciprocating saw, the fully charged battery was
> > able to crosscut about six 6" dia soft wood before it needed a charge.
> > Grab the second battery and another six crosscuts was all she got. Makes a
> > short working day. Even with the lithium iron, the run time may not be
> > more than three times as much but should be enough when paired with a fast
> > 15 minute charger. I'll take my corded Super Sawzall next time.
>
> I totally agree unless you have a specific need to make a few cuts where
> there is no power available.
> Other than that the drill, impact driver, and flash light are about the only
> tools that I want to be cordless. Now if tool manufacturers would simply
> come out with a battery shaped adapter with a tail so that you could use the
> saws like a normal saw but still have the ability for the times you need to
> cut with out power being available.
Lot of tools out there that swing both ways now. Check out one
example:
http://tinyurl.com/6duqgl
Robert
"B A R R Y" <[email protected]> wrote in message
news:[email protected]...
> On Mon, 5 May 2008 20:05:33 -0700, " Frank"
> <[email protected]> wrote:
>>
>>Let say the recip saw is equal to a 5A, 120V corded saw. That would
>>translate to 600 watts (5A x 120V) or 33.3A at 18V for the cordless job.
>>So
>>1.71 amp hours at 33.3A gives 3.08 minutes of run time. ie, (1.71A x 60
>>minutes)/33.3A = 3.08 minutes so the estimated 5 minutes is reasonable,
>>and
>>yes its piss poor.
>
> Your math is off. My guess for the reason is that the corded saw is
> rated for 5A peak, not continuous operation.
>
5A is very conservative for a corded saw, typically its 10A or more for a
good saw like Milwaukee Super Sawzall or Porter Cable Tiger saw, both I
have. The ampere rating is continuous at maximum speed and load, not lock
rotor that could be a few time more than the rated current. Think of it this
way, how much run time do you get from one size C battery? Connecting the
batteries in series gives you more voltage, not longer run time. Amazing it
could even run for 5 minutes at maximum load.
Try pruning a life tree branch about 6" to 8" in diameter with the recip saw
and see how many cross cuts you could do with a single charge. I don't think
you could do much more than 9 cross cuts with your XRP battery. Remember
this is wet wood which requires more effort, not the dry 2x8 or 2x10s. FYI,
I was cutting eucalyptus with the Fire Storm (Black & Decker) FS760R 9"
pruning blade.
http://www.firestormtools.com/ProductDetails.aspx?pid=17032
> I have the same recip saw. It's no corded tool, but the runtime is
> far from 3 (or even 5) minutes. One of these days, I'll time it.
>
> This past weekend, I had to partially disassemble a 12 year old deck
> and build a ramp to remove a hot tub.
>
> During the job:
> - I removed ~ (36) 3" deck screws with an impact driver
> - I cut off (4) 3/8" rusty head lag bolts with an angle grinder
> - I made (8-10) cuts in 2x8's and 2x10's with a 6 1/2" circular saw
> - I did about 45 seconds of cutting with the same recip saw as the OP
> - I then drove (12) 3" and (16) 2" new deck screws with the impact
> driver
>
> The next day:
> - I removed the new (12) 3" and (16) 2" deck screws
> - I reinstalled the (36) old 3" deck screws.
>
> ALL WITH THE SAME XRP 18V BATTERY CHARGE! <G>
>
> I have a Matsushita blade on the 6 1/2", and a nice Milwaukee blade on
> the recip. Remember, impact drivers are more efficient than drills,
> so they get better battery life under these conditions.
>
> I also looked _really_ cool, too, with no cords and all...
>
> ---------------------------------------------
> ** http://www.bburke.com/woodworking.html **
> ---------------------------------------------
On Thu, 8 May 2008 00:45:48 -0400, "Mike Marlow"
<[email protected]> wrote:
>
>I know holster, but what is this ladder thing you speak of?
A levitating device! <G>
---------------------------------------------
** http://www.bburke.com/woodworking.html **
---------------------------------------------
On Wed, 07 May 2008 23:03:06 -0700, mac davis
<[email protected]> wrote:
>>I do have a NICE drill holster for ladder work.
>>
>ok.. I guess a holster is acceptable... for roof work..
Unless you've have 24+ years of "three points of contact" ladder
training. <G>
---------------------------------------------
** http://www.bburke.com/woodworking.html **
---------------------------------------------
On May 3, 3:27 pm, " Frank" <[email protected]> wrote:
> My problems with cordless tools is the limited run time before the next
> charge. Its not a problem with drills as it could run for a long time but
> for demanding loads like circular and reciprocation saws (my new DeWalt
> cordless NiCad combo) the 5 minute run time paired with a one hour charger
> doesn't cut it. For the reciprocating saw, the fully charged battery was
> able to crosscut about six 6" dia soft wood before it needed a charge. Grab
> the second battery and another six crosscuts was all she got. Makes a short
> working day. Even with the lithium iron, the run time may not be more than
> three times as much but should be enough when paired with a fast 15 minute
> charger. I'll take my corded Super Sawzall next time.
I'd say you have either a bad recip saw or bad batteries. We used a
DeWalt cordless recip to trim the rafter and ceiling joist ends when I
built my shop, and we got through the two needs (basically, trimming
the nub off the joist ends, and evening up the ends of the rafters for
gutters that were never installed) on one battery per side. That was
in '95, or '96. Tools today should be better, but maybe not. God
knows, all those I've run across lately aren't, but I'd see about
warranteeing that recip saw--more likely culprit if the batteries work
OK elsewhere.
On Mon, 5 May 2008 20:05:33 -0700, " Frank"
<[email protected]> wrote:
>
>Let say the recip saw is equal to a 5A, 120V corded saw. That would
>translate to 600 watts (5A x 120V) or 33.3A at 18V for the cordless job. So
>1.71 amp hours at 33.3A gives 3.08 minutes of run time. ie, (1.71A x 60
>minutes)/33.3A = 3.08 minutes so the estimated 5 minutes is reasonable, and
>yes its piss poor.
Your math is off. My guess for the reason is that the corded saw is
rated for 5A peak, not continuous operation.
I have the same recip saw. It's no corded tool, but the runtime is
far from 3 (or even 5) minutes. One of these days, I'll time it.
This past weekend, I had to partially disassemble a 12 year old deck
and build a ramp to remove a hot tub.
During the job:
- I removed ~ (36) 3" deck screws with an impact driver
- I cut off (4) 3/8" rusty head lag bolts with an angle grinder
- I made (8-10) cuts in 2x8's and 2x10's with a 6 1/2" circular saw
- I did about 45 seconds of cutting with the same recip saw as the OP
- I then drove (12) 3" and (16) 2" new deck screws with the impact
driver
The next day:
- I removed the new (12) 3" and (16) 2" deck screws
- I reinstalled the (36) old 3" deck screws.
ALL WITH THE SAME XRP 18V BATTERY CHARGE! <G>
I have a Matsushita blade on the 6 1/2", and a nice Milwaukee blade on
the recip. Remember, impact drivers are more efficient than drills,
so they get better battery life under these conditions.
I also looked _really_ cool, too, with no cords and all...
---------------------------------------------
** http://www.bburke.com/woodworking.html **
---------------------------------------------
On Thu, 8 May 2008 00:45:48 -0400, "Mike Marlow" <[email protected]>
wrote:
>
>"B A R R Y" <[email protected]> wrote in message
>news:[email protected]...
>> On Wed, 07 May 2008 08:51:16 -0700, mac davis
>> <[email protected]> wrote:
>>
>>>On Tue, 06 May 2008 16:24:23 -0400, B A R R Y <[email protected]>
>>>wrote:
>>>
>>>
>>>>I also looked _really_ cool, too, with no cords and all...
>>>>
>>>But, did you have a tool belt and yardstick suspenders?
>>
>> Tool belt, no suspenders at all.
>>
>> I do have a NICE drill holster for ladder work.
>>
>
>I know holster, but what is this ladder thing you speak of?
like when you put something off? ;~)
mac
Please remove splinters before emailing
On Sat, 03 May 2008 21:48:18 GMT, Brian Henderson
>
>Most people who go cordless crazy are just people trying to look cool,
>there's rarely a case where they're really needed.
Count me in as someone "trying to look cool". <G>
I'll never go back, unless the specific task that requires more run
time than the batteries can deal with. I simply like the lack of a
cord, especially when I'm using three drills at once, breaking down
sheets with my circular saw, trimming trees with my recip saw, or
cutting screwdriver slots in a stripped screw with an angle grinder.
---------------------------------------------
** http://www.bburke.com/woodworking.html **
---------------------------------------------
<[email protected]> wrote
>
> Lot of tools out there that swing both ways now. Check out one
> example:
>
> http://tinyurl.com/6duqgl
>
Just so everyone knows, the above link shows actual tools. Specifically a
woodworking tool.
I was a bit afraid to go there. A tool that swings both ways could have been
a bisexual tool or an industrial grade "marital aid".
I must be overy sensitive to all the spam/porn out there.
"Upscale" <[email protected]> wrote in message
news:[email protected]...
>
> "Charlie Self" <[email protected]> wrote in message
>> > cordless NiCad combo) the 5 minute run time paired with a one hour
> charger
>
>> warranteeing that recip saw--more likely culprit if the batteries work
>> OK elsewhere.
>
> Yeah, Charlie's right. 5 minutes is piss poor. You've got some type of
> malfunction somewhere.
>
>
Not malfunction but just the nature of batteries:
http://www.amazon.com/DeWalt-DC9096-18-Volt-NiCad-Battery/dp/B0002AJKOA/ref=acc_glance_tool_ai_-2_3_tit
I have the 18V standard batteries and the above 2.4 amp hour XRP battery has
40% more amp hour. No rating found for my standard power pack but working
backwards relative to the XRP my batteries should be around 1.71 amp hour.
Let say the recip saw is equal to a 5A, 120V corded saw. That would
translate to 600 watts (5A x 120V) or 33.3A at 18V for the cordless job. So
1.71 amp hours at 33.3A gives 3.08 minutes of run time. ie, (1.71A x 60
minutes)/33.3A = 3.08 minutes so the estimated 5 minutes is reasonable, and
yes its piss poor.
DGDevin wrote:
> I get the impression lots of folks use cordless tools as much because they
> figure it's the cool way to go as opposed to it being something that makes
> what they're doing way easier. It makes sense if you're up on a roof or
> working someplace with no line power, but how many people are typically in
> that situation? If you really need cordless then it makes sense to pick a
> brand where one kind of battery can run ten different tools and then get a
> bunch of batteries and a multi-battery charger. So far I've been able to
> resist that, so far. ;~)
Agreed. I use primarily corded tools because I never use them outside
of my shop and I never use them where I have no power to plug in. The
only exception are my cordless drills and drivers and all of them have
at least 3 batteries and one is always on the charger at all times. I
have never run into a case where I needed a battery and didn't have one
fully charged.
Most people who go cordless crazy are just people trying to look cool,
there's rarely a case where they're really needed.
--
Blog Me! http://BitchSpot.JadeDragonOnline.com
Frank wrote:
> Grab the second battery and another six
> crosscuts was all she got. Makes a short working day. Even with the
> lithium iron, the run time may not be more than three times as much
> but should be enough when paired with a fast 15 minute charger. I'll
> take my corded Super Sawzall next time.
I get the impression lots of folks use cordless tools as much because they
figure it's the cool way to go as opposed to it being something that makes
what they're doing way easier. It makes sense if you're up on a roof or
working someplace with no line power, but how many people are typically in
that situation? If you really need cordless then it makes sense to pick a
brand where one kind of battery can run ten different tools and then get a
bunch of batteries and a multi-battery charger. So far I've been able to
resist that, so far. ;~)
<[email protected]> wrote in message
news:[email protected]...
> On May 3, 4:13 pm, "Leon" <[email protected]> wrote:
>
> Lot of tools out there that swing both ways now. Check out one
> example:
AC/DC? LOL I guess it applies to the sicientific tool world and the
different "Lifestyle" world. I did not know that power tools had different
lifestyles also.
On a more serious note, IIRC Hitachi had something like that a few years
back, maybe it was a bigger battery pack hanging on a tool belt.
Thanks for the info. I wonder if Makita offers that in 12.6 volt?
>
> http://tinyurl.com/6duqgl
>
> Robert
"Lew Hodgett" <[email protected]> wrote in message
news:rhJUj.8773$0L.2292@trnddc07...
>
> "B A R R Y" wrote:
>
>
>> I have never seen a "Firestorm" product that impressed me.
>
> "Firestorm", isn't that also known as "Junk"?
>
> Lew
>
>
Yes, I don't buy anything Black& Decker tools but those blades cut better
and last longer than of my bi-metal Milwaukee blades for pruning. The B&D
Workmate is an exception too. I once had a B&D worm drive circular saw that
looks exactly like my Skil HD77 - that was a great saw.
"Leon" <[email protected]> wrote in message
news:[email protected]...
>
> <[email protected]> wrote in message
> news:[email protected]...
>> On May 3, 4:13 pm, "Leon" <[email protected]> wrote:
>
>
>>
>> Lot of tools out there that swing both ways now. Check out one
>> example:
>
> AC/DC? LOL I guess it applies to the sicientific tool world and the
> different "Lifestyle" world. I did not know that power tools had
> different lifestyles also.
>
There ya go. Cordless is a lifestyle!
Just ask the marketing guys at the major tool companies.
On Fri, 9 May 2008 04:58:21 -0700, " Frank"
<[email protected]> wrote:
>The B&D
>Workmate is an exception too.
I like my Workmate, too.
---------------------------------------------
** http://www.bburke.com/woodworking.html **
---------------------------------------------
When I had some major pruning to do, I bought a pack of these genuine
Milwaukee pruning blades at Coastal. They work great.
http://i72.photobucket.com/albums/i186/leegordon/PruningBlade.jpg
Lee
--
To e-mail, replace "bucketofspam" with "dleegordon"
_________________________________
Lee Gordon
http://www.leegordonproductions.com
"B A R R Y" <[email protected]> wrote in message
news:[email protected]...
> On Wed, 07 May 2008 08:51:16 -0700, mac davis
> <[email protected]> wrote:
>
>>On Tue, 06 May 2008 16:24:23 -0400, B A R R Y <[email protected]>
>>wrote:
>>
>>
>>>I also looked _really_ cool, too, with no cords and all...
>>>
>>But, did you have a tool belt and yardstick suspenders?
>
> Tool belt, no suspenders at all.
>
> I do have a NICE drill holster for ladder work.
>
I know holster, but what is this ladder thing you speak of?
--
-Mike-
[email protected]
On Thu, 08 May 2008 16:00:42 -0400, B A R R Y <[email protected]>
wrote:
>
>I'm not familiar with the Firestorm blades, but I have some AWESOME
>pruning blades that are almost as good as my Sandvik folding pack saw.
>I've brought the saw with the killer blades to trail maintenance
>sessions with top notch results.
I forgot to mention the blade! <G>
<http://www.amazon.com/Milwaukee-48-00-5016-9-Inch-Super-Sawzall/dp/B00008Z9YH/ref=sr_1_1?ie=UTF8&s=hi&qid=1210277659&sr=8-1>
Milwaukee 5016 "Super Sharp" They will easily cut skin if you're not
careful mounting them on the saw. DAMHIKT These blades seem as
sharp as a good Dozuki, to me. The tooth pattern does a great job of
keeping the kerf clear in the green wood, and the body rarely pinches.
I often take the recip saw in my backpack, on mountain bike trail
maintenance trips, as the cord doesn't reach into the woods. <G> This
blade kicks ass through live trees, dead fall, you name it. The
folding saw I'm comparing it to is very stiff competition:
<http://www.amazon.com/Sandvik-Bahco-396-LAP-Laplander-Folding/dp/B0015YNI18/ref=sr_1_1?ie=UTF8&s=hi&qid=1210278124&sr=1-1>
Years ago, I learned a hard lesson regarding marginal blades on
cordless tools. All cordless tools come with crappy blades! I
actually burned a 9.6v Makita circular saw up, totally destroying it,
while using the stock blade for (1) 96" long cut in 3/4" BB plywood.=
The same saw, ok... the REPLACEMENT of that saw, would make 5-6 of
the same cut using a Matsushita carbide blade on a single charge.
---------------------------------------------
** http://www.bburke.com/woodworking.html **
---------------------------------------------
On Mon, 5 May 2008 09:01:34 -0400, "Lee Michaels"
<[email protected]> wrote:
>
>I was a bit afraid to go there. A tool that swings both ways could have been
>a bisexual tool or an industrial grade "marital aid".
Like the "Anal Intruder" from the movie "Top Secret?
---------------------------------------------
** http://www.bburke.com/woodworking.html **
---------------------------------------------
mac davis wrote:
> On Tue, 06 May 2008 16:24:23 -0400, B A R R Y <[email protected]> wrote:
>
>
>> I also looked _really_ cool, too, with no cords and all...
>>
> But, did you have a tool belt and yardstick suspenders?
1/2 way! <G>
I do have a tool belt, complete with driver holster, but no suspenders.
"Charlie Self" <[email protected]> wrote in message
> > cordless NiCad combo) the 5 minute run time paired with a one hour
charger
> warranteeing that recip saw--more likely culprit if the batteries work
> OK elsewhere.
Yeah, Charlie's right. 5 minutes is piss poor. You've got some type of
malfunction somewhere.
On May 3, 9:19=A0pm, mac davis <[email protected]> wrote:
> On Sat, 03 May 2008 21:48:18 GMT, Brian Henderson
>
>
>
> <[email protected]> wrote:
> >DGDevin wrote:
> >> I get the impression lots of folks use cordless tools as much because t=
hey
> >> figure it's the cool way to go as opposed to it being something that ma=
kes
> >> what they're doing way easier. =A0It makes sense if you're up on a roof=
or
> >> working someplace with no line power, but how many people are typically=
in
> >> that situation? =A0If you really need cordless then it makes sense to p=
ick a
> >> brand where one kind of battery can run ten different tools and then ge=
t a
> >> bunch of batteries and a multi-battery charger. =A0So far I've been abl=
e to
> >> resist that, so far. =A0;~)
>
> >Agreed. =A0I use primarily corded tools because I never use them outside
> >of my shop and I never use them where I have no power to plug in. =A0The
> >only exception are my cordless drills and drivers and all of them have
> >at least 3 batteries and one is always on the charger at all times. =A0I
> >have never run into a case where I needed a battery and didn't have one
> >fully charged.
>
> >Most people who go cordless crazy are just people trying to look cool,
> >there's rarely a case where they're really needed.
>
> Yep, me too.. (three?)
>
> I have several cordless tools, but they rarely leave the shop.. maybe used=
on
> the outside of the house or something..
> Main reason I went cordless with the drills and stuff was to reduce the ta=
ngle
> of cords on the bench... The suckers seem to tie themselves in knots when =
you
> use 2 or 3 corded tools during a project..
>
We use cordless drivers and drills only on job-sites during
installation. It is during that time that 2 or 3 guys would otherwise
get all tangled up, which under certain conditions could lead to
dancing.
For me, my personal favourite all-around power tool is the small
Milwaukee angle drill, and that has a tail...too bad, I have lived
with it for decades and see nothing on the horizon that I will want in
it's place. It is light, has tons of balls and fits my hand perfectly.
I use a small clip which holds the cord at the shoulder of my vest and
the cord runs along my arm...I don't even know I have a cord till some
asshole (usually me) steps on it. After I have exclaimed: "Golly
willikers!!, I must be more careful where I put my feet next
time!!!"..I then continue working as if nothing happened. (My crew
usually cowers in fear after such an outburst.)
mac davis wrote:
> On Sat, 03 May 2008 21:48:18 GMT, Brian Henderson
> <[email protected]> wrote:
>
>>DGDevin wrote:
>>> I get the impression lots of folks use cordless tools as much because
>>> they figure it's the cool way to go as opposed to it being something
>>> that makes
>>> what they're doing way easier. It makes sense if you're up on a roof or
>>> working someplace with no line power, but how many people are typically
>>> in
>>> that situation? If you really need cordless then it makes sense to pick
>>> a brand where one kind of battery can run ten different tools and then
>>> get a
>>> bunch of batteries and a multi-battery charger. So far I've been able
>>> to
>>> resist that, so far. ;~)
>>
>>Agreed. I use primarily corded tools because I never use them outside
>>of my shop and I never use them where I have no power to plug in. The
>>only exception are my cordless drills and drivers and all of them have
>>at least 3 batteries and one is always on the charger at all times. I
>>have never run into a case where I needed a battery and didn't have one
>>fully charged.
>>
>>Most people who go cordless crazy are just people trying to look cool,
>>there's rarely a case where they're really needed.
>
> Yep, me too.. (three?)
>
> I have several cordless tools, but they rarely leave the shop.. maybe used
> on the outside of the house or something..
> Main reason I went cordless with the drills and stuff was to reduce the
> tangle of cords on the bench... The suckers seem to tie themselves in
> knots when you use 2 or 3 corded tools during a project..
>
>
> mac
>
> Please remove splinters before emailing
I use 3 cordless drills just about everyday. My Porter Cable 14.4 gets the
most use and it usually lasts the longest. I have a De Walt 12 volt that I
use as a driver sometimes. But the charge last no where near as long as the
PC. I also use a PC 19.2 volt but not as much as the other two, its kinda
heavy. The PC 14.4 is at least 8 years old and I use it everyday and the
only thing I ever replaced were 4 batteries total. But sadly I've heard PC
is going downhill ever since Black and Decker bought them up. Like who
didn't know that would happen??
I never really paid much attention to how long the DeWalt lasts though. It
seems acceptable. Maybe you just have some warn or defective batteries
--
"You can lead them to LINUX
but you can't make them THINK"
Running Mandriva release 2008.0 free-i586 using KDE on i586
"bq340" <[email protected]> wrote in message
news:[email protected]...
> Frank wrote:
> (my new DeWalt
>> cordless NiCad combo) the 5 minute run time paired with a one hour
>> charger doesn't cut it.
>
> How new is it?
>
> NiCads need a few cycles before they give full performance......
> MikeB
New, had it for a week now. Cycled about 10 times, no improvement. Nothing
wrong with the batteries, just needed more amp hours. The drill should be
able to run for hours but the circular saw and recip saw is a different
story - not just Dewalt but all other brands are the same.
On Tue, 06 May 2008 16:24:23 -0400, B A R R Y <[email protected]> wrote:
>I also looked _really_ cool, too, with no cords and all...
>
But, did you have a tool belt and yardstick suspenders?
mac
Please remove splinters before emailing
On Wed, 07 May 2008 08:51:16 -0700, mac davis
<[email protected]> wrote:
>On Tue, 06 May 2008 16:24:23 -0400, B A R R Y <[email protected]> wrote:
>
>
>>I also looked _really_ cool, too, with no cords and all...
>>
>But, did you have a tool belt and yardstick suspenders?
Tool belt, no suspenders at all.
I do have a NICE drill holster for ladder work.
---------------------------------------------
** http://www.bburke.com/woodworking.html **
---------------------------------------------
On Thu, 8 May 2008 17:54:52 -0400, "Lee Gordon"
<[email protected]> wrote:
>When I had some major pruning to do, I bought a pack of these genuine
>Milwaukee pruning blades at Coastal. They work great.
>
>http://i72.photobucket.com/albums/i186/leegordon/PruningBlade.jpg
>
>Lee
Isn't it fantastic what a good blade does for battery life?
I gotta' get some of THOSE!
---------------------------------------------
** http://www.bburke.com/woodworking.html **
---------------------------------------------
On Wed, 07 May 2008 18:59:09 -0400, B A R R Y <[email protected]> wrote:
>On Wed, 07 May 2008 08:51:16 -0700, mac davis
><[email protected]> wrote:
>
>>On Tue, 06 May 2008 16:24:23 -0400, B A R R Y <[email protected]> wrote:
>>
>>
>>>I also looked _really_ cool, too, with no cords and all...
>>>
>>But, did you have a tool belt and yardstick suspenders?
>
>Tool belt, no suspenders at all.
>
>I do have a NICE drill holster for ladder work.
>
ok.. I guess a holster is acceptable... for roof work..
mac
Please remove splinters before emailing
On Wed, 7 May 2008 19:26:33 -0700, " Frank"
<[email protected]> wrote:
>
>Try pruning a life tree branch about 6" to 8" in diameter with the recip saw
>and see how many cross cuts you could do with a single charge. I don't think
>you could do much more than 9 cross cuts with your XRP battery. Remember
>this is wet wood which requires more effort, not the dry 2x8 or 2x10s. FYI,
>I was cutting eucalyptus with the Fire Storm (Black & Decker) FS760R 9"
>pruning blade.
Will do, as I'm planning to do pruning next week.
I'm not familiar with the Firestorm blades, but I have some AWESOME
pruning blades that are almost as good as my Sandvik folding pack saw.
I've brought the saw with the killer blades to trail maintenance
sessions with top notch results.
I have never seen a "Firestorm" product that impressed me.
---------------------------------------------
** http://www.bburke.com/woodworking.html **
---------------------------------------------
On Sat, 03 May 2008 21:48:18 GMT, Brian Henderson
<[email protected]> wrote:
>DGDevin wrote:
>> I get the impression lots of folks use cordless tools as much because they
>> figure it's the cool way to go as opposed to it being something that makes
>> what they're doing way easier. It makes sense if you're up on a roof or
>> working someplace with no line power, but how many people are typically in
>> that situation? If you really need cordless then it makes sense to pick a
>> brand where one kind of battery can run ten different tools and then get a
>> bunch of batteries and a multi-battery charger. So far I've been able to
>> resist that, so far. ;~)
>
>Agreed. I use primarily corded tools because I never use them outside
>of my shop and I never use them where I have no power to plug in. The
>only exception are my cordless drills and drivers and all of them have
>at least 3 batteries and one is always on the charger at all times. I
>have never run into a case where I needed a battery and didn't have one
>fully charged.
>
>Most people who go cordless crazy are just people trying to look cool,
>there's rarely a case where they're really needed.
Yep, me too.. (three?)
I have several cordless tools, but they rarely leave the shop.. maybe used on
the outside of the house or something..
Main reason I went cordless with the drills and stuff was to reduce the tangle
of cords on the bench... The suckers seem to tie themselves in knots when you
use 2 or 3 corded tools during a project..
mac
Please remove splinters before emailing
On Sat, 03 May 2008 12:41:25 -0700, DGDevin wrote:
> Frank wrote:
>
>> Grab the second battery and another six crosscuts was all she got.
>> Makes a short working day. Even with the lithium iron, the run time may
>> not be more than three times as much but should be enough when paired
>> with a fast 15 minute charger. I'll take my corded Super Sawzall next
>> time.
>
> I get the impression lots of folks use cordless tools as much because
> they figure it's the cool way to go as opposed to it being something
> that makes what they're doing way easier. It makes sense if you're up
> on a roof or working someplace with no line power, but how many people
Depends on the roof I guess. I've been up on a few house roofs and it
doesn't take much to get an extension cord up there.
It's only fairly recently they they make a cordless drill with close to
the same torque as a low end plug in drill. Let alone a nice hole
shooter.
I'll take plugin over cordless any day. My walls always have power (well
almost) batteries self discharge.
Plus adding up the amount of money spent by someone I know on cordless
drills (he had a 10.x volt then a 19.x volt then a....) you could buy a
really great 1/2" chuck Milwaukee plus 2 200 foot long heavy duty (nice
thick gauge) extension cords. I could plug in drag the cord up and still
be done on the roof before you....