I'm hoping to buy a Worksharp 3000 in the very near future and was
wondering if y'all think it's worth the extra $30 to buy the glass
disk and leather honing pad. I currently sharpen my chisels and plane
irons with the Scary Sharp method and was looking for something faster
and more precise. Thanks.
Dale
DS <[email protected]> wrote in news:kv8Qj.81076$TT4.10726@attbi_s22:
>
> I've been using the slotted wheel, and really like it. It's great to
> be able to see the edge you're sharpening AS you sharpen it.
I find it kinda neat to watch the cutting of a spade bit on the drill
press. It's kind neat to watch a hole appear right in front of your eyes!
Sounds like the same type of experience.
Puckdropper
--
You can only do so much with caulk, cardboard, and duct tape.
To email me directly, send a message to puckdropper (at) fastmail.fm
"Tom Bunetta" wrote
>
> What is the main advantage of the slotted wheel?
The concept is that when the slotted wheel spins, you can see through it,
just like you can fan blades. This allows you to better guide the sharpening
of the tool, which is sharpened from below the slotted wheel.
Since I use the WS3000 only to sharpen chisels and plane irons, I've not
even tried the slotted wheel feature.
--
www.e-woodshop.net
Last update: 3/27/08
KarlC@ (the obvious)
"dale martin" <[email protected]> wrote in message
news:58d0081a-b4b2-4cc4-8c15-0f7781bbba6a@b64g2000hsa.googlegroups.com...
> I'm hoping to buy a Worksharp 3000 in the very near future and was
> wondering if y'all think it's worth the extra $30 to buy the glass
> disk and leather honing pad. I currently sharpen my chisels and plane
> irons with the Scary Sharp method and was looking for something faster
> and more precise. Thanks.
>
> Dale
http://pricecutter.com/product.asp?pn=440-0700&bhcd2=1209065122
Can it be had for less else where?
Here it is for $199.
System Includes: Two glass wheels with 2-pcs. 120, 4-pcs. 400, 4-pcs. 1000
grit papers, 1-pc. 3600 grit Micromesh and a slotted wheel with 1-pc. 80,
2-pcs. 400 and 2-pcs. 1200 grit papers. Also includes a top tool rest and a
cleaning stick. 110 Volt operation. Two year manufacturer's warranty
Tom
"dale martin" wrote in message
> I'm hoping to buy a Worksharp 3000 in the very near future and was
> wondering if y'all think it's worth the extra $30 to buy the glass
> disk and leather honing pad. I currently sharpen my chisels and plane
> irons with the Scary Sharp method and was looking for something faster
> and more precise. Thanks.
I own the WS3000 and use it without the benefit of the leather hone.
Although I may not realize what I'm missing, the patch of hair on the back
of my wrist from checking the last chisel's sharpness is just now starting
to grow back.
My advice is hold off until after you've had some experience with the tool
and judge for yourself based what you do with your chisels/plane irons.
However, I would indeed consider the purchase of an extra glass wheel for
those cases where you want coarser grits to rectify chips and gouges of
previously misused chisels/plane irons, or to quickly re-establish the
correct angle on a tool after previous inaccurate hand sharpening.
For my own use, I think I'll hold what I've got (one extra glass wheel for
the purpose stated above, loaded with 80/120).
... that said, you're going to enjoy the net result of using this "scary
sharp on steroids" system, guaranteed.
--
www.e-woodshop.net
Last update: 3/27/08
KarlC@ (the obvious)
On Apr 22, 11:20 am, "Swingman" <[email protected]> wrote:
> "dale martin" wrote in message
> > I'm hoping to buy a Worksharp 3000 in the very near future and was
> > wondering if y'all think it's worth the extra $30 to buy the glass
> > disk and leather honing pad. I currently sharpen my chisels and plane
> > irons with the Scary Sharp method and was looking for something faster
> > and more precise. Thanks.
>
> I own the WS3000 and use it without the benefit of the leather hone.
> Although I may not realize what I'm missing, the patch of hair on the back
> of my wrist from checking the last chisel's sharpness is just now starting
> to grow back.
>
> My advice is hold off until after you've had some experience with the tool
> and judge for yourself based what you do with your chisels/plane irons.
>
> However, I would indeed consider the purchase of an extra glass wheel for
> those cases where you want coarser grits to rectify chips and gouges of
> previously misused chisels/plane irons, or to quickly re-establish the
> correct angle on a tool after previous inaccurate hand sharpening.
>
> For my own use, I think I'll hold what I've got (one extra glass wheel for
> the purpose stated above, loaded with 80/120).
>
> ... that said, you're going to enjoy the net result of using this "scary
> sharp on steroids" system, guaranteed.
>
Yeah. Just got one. Reconditioned an old and nicked chisel. Easy.
Fast. I haven't tried anything else yet, but for a start, it seems
excellent. It does what the maker says. Migod.
"Charlie Self" wrote
> On Apr 22, 11:20 am, "Swingman" wrote:
> > ... that said, you're going to enjoy the net result of using this
"scary
> > sharp on steroids" system, guaranteed.
> >
>
> Yeah. Just got one. Reconditioned an old and nicked chisel. Easy.
> Fast. I haven't tried anything else yet, but for a start, it seems
> excellent. It does what the maker says. Migod.
Amazing ain't it ... and the best part may well be the 'non Festool like'
price. :)
--
www.e-woodshop.net
Last update: 3/27/08
KarlC@ (the obvious)
"dale martin" <[email protected]> wrote in message
news:58d0081a-b4b2-4cc4-8c15-0f7781bbba6a@b64g2000hsa.googlegroups.com...
> I'm hoping to buy a Worksharp 3000 in the very near future and was
> wondering if y'all think it's worth the extra $30 to buy the glass
> disk and leather honing pad. I currently sharpen my chisels and plane
> irons with the Scary Sharp method and was looking for something faster
> and more precise. Thanks.
>
> Dale
The leather hone will put a keen edge on the tool but the leather wheel is
more appreciated for polishing the surface to a mirror finish. The mirror
finish helps to cut down on friction and helps the tool slide into the wood
fibers more easily. If you are happy with the edge you are getting I'd say
save your money. If you are using your chisels or tools with out the
benefit of a mallet or hammer and using your brute strength to push the tool
into the wood a mirror surface will probably benefit you.
dale martin wrote:
> I'm hoping to buy a Worksharp 3000 in the very near future and was
> wondering if y'all think it's worth the extra $30 to buy the glass
> disk and leather honing pad. I currently sharpen my chisels and plane
> irons with the Scary Sharp method and was looking for something faster
> and more precise. Thanks.
I bought a WS3000 recently and tested the results of honed/non-honed on
a couple of chisels and a couple of Flexcut carving tools.
It got them quite sharp without honing, but after honing they were even
sharper. The difference was noticeable.
I think you'll be happy without it, but if you try it, you'll use it.
Swingman wrote:
> "Charlie Self" wrote
>> On Apr 22, 11:20 am, "Swingman" wrote:
>
>>> ... that said, you're going to enjoy the net result of using this
> "scary
>>> sharp on steroids" system, guaranteed.
>>>
>> Yeah. Just got one. Reconditioned an old and nicked chisel. Easy.
>> Fast. I haven't tried anything else yet, but for a start, it seems
>> excellent. It does what the maker says. Migod.
>
> Amazing ain't it ... and the best part may well be the 'non Festool like'
> price. :)
You could probably still buy a $400 systainer for it if you wanted though...
Swingman wrote:
> "Tom Bunetta" wrote
>> What is the main advantage of the slotted wheel?
>
> The concept is that when the slotted wheel spins, you can see through it,
> just like you can fan blades. This allows you to better guide the sharpening
> of the tool, which is sharpened from below the slotted wheel.
>
> Since I use the WS3000 only to sharpen chisels and plane irons, I've not
> even tried the slotted wheel feature.
I've been using the slotted wheel, and really like it. It's great to be
able to see the edge you're sharpening AS you sharpen it.